下载中心

NI-USRP 1.3 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.3下载

文章来源:石鑫华视觉网时间:2022-05-13 15:17:15 点击:266

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-USRP 1.3 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.3下载

NI USRP
NI-USRP支持使用NI通用软件无线电外设(USRP)收发仪和LabVIEW可重配置I/O (RIO) USRP设备的客户。
NI-USRP是一个NI仪器驱动程序，可同时支持软件无线电(SDR)设备和可重配置SDR设备。如果要配置设备，可使用NI-USRP仪器驱动程序中包含的NI-USRP API或USRP RIO仪器设计库(IDL)。NI-USRP可帮助您使用NI SDR硬件创建发射(Tx)和接收(Rx)应用。

1.3
文件大小: 598984705 字节 (571.24 MB)
修改日期: 2019-06-25 02:58
MD5: 40a4825724e5fcde2a51190cb34db717（官方正确）
SHA1: d064d4c3a3c2b6ee2d7b2982f026c7deaf29b27f
SHA256: 59ed23621beb26fa08cb0e0dedfb71cb8c48ab1d3e30616e4292b7ea1cfb43ba
CRC32: 6054ca44

百度网盘和NI官方下载地址：

http://pcmv.cn/thread-25622-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-USRP Readme

Version 1.3

Thank you for using NI-USRP instrument driver software. This file contains important information about NI-USRP and is organized into the following sections:

New Features

Supported Hardware

System Requirements

Installed Software, Documentation, and Examples

Documentation

Accessing VIs and Sample Project

Accessing Examples

Product Security and Critical Updates

Uninstalling/Modifying NI-USRP

Known Issues

Bug Fixes

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

Legal Information

New Features

NI-USRP 1.3 adds the following features:

Support for LabVIEW 2013.
Support for NI USRP-2940R, NI USRP-2942R, NI USRP-2943R, NI USRP-2950R, NI USRP-2952R, and NI USRP-2953R devices (NI 294x/295x devices also may be used as LabVIEW FPGA targets)
Compatible with Ettus Research USRP X300 and USRP X310 devices using the following daughterboards:

Support for Windows 8.1

NI-USRP 1.2 includes the following features:

Support for the NI USRP-2930 device
Support for the NI USRP-2932 device
API Changes:

GPS Lock Status property
GPS Sentence GGA property
GPS Sentence RMC property
GPS Time (seconds) property
Has GPS Disciplined Clock? property
niUSRP Get Time VI
niUSRP Wait for Lock VI
niUSRP LV Timestamp to USRP Timestamp VI
niUSRP USRP Timestamp to LV Timestamp VI
VIs
Properties

Compatible with Ettus Research USRP2, USRP N200, and USRP N210 devices using the following daughterboards:

SBX
LFTX
LFRX
BasicTX
BasicRX

NI-USRP 1.1 includes the following features:

Support for the NI USRP-2922 device
Support for configuring 8-bit sample width for transferring data over the bus, which can increase streaming rates and allow higher I/Q rates
Support for fetching and writing binary data waveforms
Support for programmatically discovering devices in the system and their model information using the niUSRP Find Devices VI
Support for controlling multiple devices in a single session (for use in MIMO applications)
Support for locking the local oscillator (LO) to a user-specified frequency and controlling the carrier frequency independently using the digital signal processor (DSP)
Support for reconfiguring gain, carrier frequency, and active antenna while an acquisition or generation is in progress
API Changes:

Number of Channels in Session property
Host Data Type property
Sample Width property
Expected Peak property
LO Frequency property
Warning Policy property
niUSRP Fetch Rx Data (I16) VI
niUSRP Fetch Rx Data (2D CDB) VI
niUSRP Fetch Rx Data (2D I16) VI
niUSRP Write Tx Data (I16) VI
niUSRP Write Tx Data (2D CDB) VI
niUSRP Write Tx Data (2D I16) VI
niUSRP Find Devices VI
VIs
Properties

Compatible with Ettus Research USRP2, USRP N200, and USRP N210 devices using the following daughterboards:

SBX
LFTX
LFRX
BasicTX
BasicRX

NI-USRP 1.0 includes the following features:

Support for NI USRP-292x devices
Support for LabVIEW 2011 (32-bit)/2010 (32-bit)/2009 (32-bit)
Support for Windows 7/Vista/XP
Interactive configuration utility to change device IP addresses and update firmware and FPGA images
Support for continuous and finite generation (Tx) and acquisition (Rx) operations
Full set of examples, including examples that use the NI LabVIEW Modulation Toolkit
Integration with NI LabVIEW Modulation Toolkit
Compatible with Ettus Research USRP2 and USRP N210 devices using the following daughterboards:

WBX
XCVR2450

Supported Hardware

The following hardware products are supported under Windows 8.1 (32-bit and 64-bit1 versions)/7 (32-bit and 64-bit1 versions)/Vista (32-bit and 64-bit1 versions)/XP operating systems.

NI USRP-2920
NI USRP-2921
NI USRP-2922
NI USRP-2930
NI USRP-2932
NI USRP-2940R
NI USRP-2942R
NI USRP-2943R
NI USRP-2950R
NI USRP-2952R
NI USRP-2953R
Ettus Research USRP22
Ettus Research N2002
Ettus Research N2102
Ettus Research X3002
Ettus Research X3102

1 These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

2 The NI-USRP instrument driver supports WBX, SBX, XCVR2450, LFTX, LFRX, BasicTX, and BasicRX daughterboards on this device. Other daughterboards may also be compatible, but they have not been tested.

Device-specific information about these modules is included in the NI-USRP Help.

Note For NI 292x/293x devices, use LabVIEW 2010 or later. For NI 294x/295x devices, use LabVIEW 2013 or later.

Note You must update the firmware and FPGA images on your USRP module prior to using NI-USRP 1.3. Refer to the NI USRP-29xx Getting Started Guide for more information about updating the firmware and FPGA images.

System RequirementsSupported Operating Systems

NI-USRP 1.3 supports the following operating systems:

Windows 8.1 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (SP3)(32-bit)

NI recommends that you have the most recent service pack for your operating system installed.

Minimum System Requirements

Processor—Pentium 4 or equivalent
RAM—1 GB
Gigabit Ethernet interface
Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 8.1/7/Vista/XP SP3 with all available critical updates and service packs

Recommended System

Processor—Intel i7 or equivalent
RAM—2 GB
Dedicated gigabit Ethernet interface for each device
A screen resolution of 1,024 x 768
Windows 8.1/7/Vista/XP SP3 with all available critical updates and service packs

Application Development Environment (ADE)

Note You should install ADEs, such as NI LabVIEW, before installing NI-USRP. To add support for ADEs installed after installing NI-USRP, modify your NI-USRP installation or launch the NI-USRP installer again.

NI-USRP 1.3 supports the following software versions, including service packs:

LabVIEW 2010 (32-bit only), 2011 (32-bit only), 2012 (32-bit only), 2013 (32-bit only)

Installed Software, Documentation, and ExamplesInstalled Software

<NIDir32> is an alias for the following National Instruments file folder location:

Windows 8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/Windows XP: Program FilesNational Instruments
Windows 8.1(64-bit)3/7 (64-bit)3/Vista (64-bit)3: Program Files (x86)National Instruments

<SystemDir32> is an alias for the following file folder location:

Windows 8.1 (32-bit)/7 (32-bit)/Vista (32-bit)/Windows XP: WindowsSystem32
Windows 8.1(64-bit)3/7 (64-bit)3/Vista (64-bit)3: Windowssyswow64

3 These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

File Locations

Item	Installed Location
NI-USRP	<NIDir32>NI-USRP
NI-USRP Utilities	<NIDir32>NI-USRPutilities
NI-USRP Examples	<NIDir32>LabVIEW<version>examplesinstr iUSRP
NI-USRP Header files	<NIDir32>NI-USRPincludes
NI-USRP Import Library files	<NIDir32>NI-USRPlibmsc
NI-USRP DLL	<SystemDir32> iusrp.dll
NI-USRP Firmware and FPGA images	<NIDir32>NI-USRPimages

Note The NI Example Finder does not include NI-USRP examples.

Documentation

Documentation for NI-USRP 1.3 and NI-USRP devices is located at Start»Programs»National Instruments»NI-USRP»Documentation. The documentation set is composed of the following documents:

Document	Format	Description
NI-USRP Help	HTML/Windows Help	The primary document for NI-USRP products. The help is an HTML version of a traditional user manual that includes: an introduction to NI-USRP hardware device overviews how to get started with application development a complete reference for all NI-USRP programming functions
NI USRP-29xx Getting Started Guide	Printed and PDF	Printed and PDF format. Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
Specifications	Printed	PDF format. Lists technical specifications for all NI-USRP devices.
NI-USRP 1.3 Readme	HTML (this document)	This document.

For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

Note To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Accessing VIs and Sample Project

To access the LabVIEW sample project from the Create Project dialog, select Sample Projects in the left pane and navigate to the Simple NI-USRP Streaming project.

NI–USRP palette VIs are available from the Functions»Instrument I/O»Instrument Drivers»NI-USRP palette.

Accessing Examples

NI-USRP includes several example applications for LabVIEW. These examples serve as interactive tools, programming models, and as building blocks in your own applications. NI-USRP includes examples for getting started and other SDR functionality. You can access the NI-USRP examples from the following locations:

From the Start menu at Start»All Programs»National Instruments»NI-USRP»Examples.
From the LabVIEW Functions palette at Instrument I/O»Instrument Drivers»NI-USRP»Examples.

You can access additional examples from the Code Sharing Community at ni.com/usrp.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

Uninstalling/Modifying NI-USRP

Perform the following procedure to uninstall NI-USRP.

For Windows XP, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-USRP 1.3 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-USRP 1.3 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 8.1, complete the following steps:

Go to the desktop.
Select the Charms Bar.
Select Settings.
Click Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-USRP 1.3 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-USRP 1.3 installation, the following software is installed. To completely remove the NI-USRP 1.3 installation from your system, you must also remove all of the following packages:

NI LabVIEW Modulation Toolkit 4.3.4
NI LabVIEW <version> MathScript RT Module (depending on distribution)
NI LabVIEW <version> Digital Filter Design Toolkit (depending on distribution)
NI-RIO 13.1.1
NI Measurement & Automation Explorer 5.6.0

Caution Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.

Note Do not attempt to uninstall by manually deleting files.

Ethernet Support on NI 294x/295x Devices

NI 294x/295x devices support both 1G Ethernet and 10G Ethernet using the connectors on the device back panel. With the default FPGA image, port 0 is designated for 1G and port 1 is designated for 10G.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-USRP 1.3 Known Issues at ni.com for an up-to-date list of known issues.

Bug Fixes

The following items are changes in NI-USRP 1.3 from NI-USRP 1.2.

ID	Fixed Issue
460052	Fixed an issue that caused the local oscillator to fail to lock when two devices connected by the MIMO connector transmit synchronously while one device also receives.

The following items are changes in NI-USRP 1.2 from NI-USRP 1.1.

ID	Fixed Issue
376069	Fixed an issue that caused the property node "Number of Samples is Finite" to always return a "false" value regardless of whether the task was set as finite or continuous.
370383	Fixed an issue that caused a multi-device session to fail. Remove any trailing semicolons in lists of devices. For example, use "192.168.10.2; 192.168.10.3" instead of "192.168.10.2; 192.168.10.3;".
362726	Fixed an issue that caused LabVIEW to crash after configuring the number of samples in niUSRP EX Rx Continuous Async.vi.

The following items are changes in NI-USRP 1.1 from NI-USRP 1.0.

ID	Fixed Issue
325276	Corrected the documented maximum input power (Pin) for the NI USRP-2920 to 0 dBm.
325144	Fixed an issue that caused the NI-USRP Configuration Utility to hang if the final field of the IP address was three or more digits.
313727	Fixed an issue where the niUSRP EX QAM Rx example VI would not display a signal constellation when run using the default values.
311842	Fixed an issue where NI-USRP returned an error if you opened an Rx session when a Tx session was already open for a separate device.
313754	Fixed an issue where NI-USRP returned an incorrect value for the coerced gain parameter on a Tx session using the NI USRP-2920.
329137	Fixed an issue where NI-USRP raised the class of the process to "Real-Time" and the priority of the thread to "Highest" when an Rx operation started.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.x Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.x Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.x Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).

For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI-USRP Drops Support for Microsoft Windows Vista, and Windows XP in 2016

National Instruments NI-USRP will drop support for Microsoft Windows Vista, and Windows XP as of July 1, 2016. Versions of NI-USRP that ship after July 1, 2016 will not install or run on Windows Vista, or Windows XP. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

Legal Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFEULAs directory.
Review <National Instruments>_Legal Information_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

NI-USRP 1.3 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.3下载