下载中心

NI-USRP 1.2 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.2下载

文章来源:石鑫华视觉网时间:2022-05-13 15:08:48 点击:251

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-USRP 1.2 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.2下载

NI USRP
NI-USRP支持使用NI通用软件无线电外设(USRP)收发仪和LabVIEW可重配置I/O (RIO) USRP设备的客户。
NI-USRP是一个NI仪器驱动程序，可同时支持软件无线电(SDR)设备和可重配置SDR设备。如果要配置设备，可使用NI-USRP仪器驱动程序中包含的NI-USRP API或USRP RIO仪器设计库(IDL)。NI-USRP可帮助您使用NI SDR硬件创建发射(Tx)和接收(Rx)应用。

1.2
文件大小: 42197470 字节 (40.24 MB)
修改日期: 2013-10-01 00:20
MD5: 5c92d2112fb725b2e2a8efa32de52454（官方正确）
SHA1: a4128549a803fedc8fca9afb3278392af4395107
SHA256: d8be7cd0edd6df2b0c6280b2651a262aad9a898940ffb8d8170eb1432b9e13f6
CRC32: c2a31b9c

百度网盘和NI官方下载地址：

http://pcmv.cn/thread-25621-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-USRP Readme

Version 1.2

Thank you for using NI-USRP instrument driver software. This file contains important information about NI-USRP and is organized into the following sections:

New Features
Supported Hardware
System Requirements
Installed File Names and Locations
Updates and Notifications
Uninstalling/Modifying NI-USRP
Known Issues
Bug Fixes
Notice Regarding Microsoft Silverlight Installation and Redistribution
Important Information

New Features

NI-USRP 1.2 adds the following features:

Support for the NI USRP-2930 device
Support for the NI USRP-2932 device
API Changes:

GPS Lock Status property
GPS Sentence GGA property
GPS Sentence RMC property
GPS Time (seconds) property
Has GPS Disciplined Clock? property
niUSRP Get Time VI
niUSRP Wait for Lock VI
niUSRP LV Timestamp to USRP Timestamp VI
niUSRP USRP Timestamp to LV Timestamp VI
VIs
Properties

Compatible with Ettus Research USRP2, USRP N200, and USRP N210 devices using the following daughterboards:

SBX
LFTX
LFRX
BasicTX
BasicRX

NI-USRP 1.2 maintains the following features:

Support for NI USRP-29xx (NI USRP-2920, NI USRP-2921, NI USRP-2922, NI USRP-2930, and NI USRP-2932 devices)
Support for LabVIEW 2012 (32-bit), 2011 (32-bit), 2010 (32-bit), and 2009 (32-bit)
Support for Windows 7/Vista/XP
Interactive configuration utility to change device IP addresses and update firmware and FPGA images
Support for continuous and finite generation (Tx) and acquisition (Rx) operations
Full set of examples, including examples that use the NI LabVIEW Modulation Toolkit
Integration with NI LabVIEW Modulation Toolkit
Compatible with Ettus Research USRP2 and USRP N210 devices using the following daughterboards:

WBX
XCVR2450

Supported Hardware

The following hardware products are supported under Windows 7 (32-bit and 64-bit1 versions)/Vista (32-bit and 64-bit1 versions)/XP operating systems.

NI USRP-2920
NI USRP-2921
NI USRP-2922
NI USRP-2930
NI USRP-2932
Ettus Research USRP22
Ettus Research N2002
Ettus Research N2102

1 These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

2 The NI-USRP instrument driver supports WBX, SBX, XCVR2450, LFTX, LFRX, BasicTX, and BasicRX daughterboards on this device. Other daughterboards may also be compatible, but they have not been tested.

Device-specific information about these modules is included in the NI-USRP Help.

Note You must update the firmware and FPGA images on your USRP module prior to using NI-USRP 1.2. Refer to the NI USRP-29xx Getting Started Guide for more information about updating the firmware and FPGA images.

System RequirementsSupported Operating Systems

NI-USRP 1.2 supports the following operating systems:

Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 (32-bit)

NI recommends that you have the most recent service pack for your operating system installed.

Minimum System Requirements

Processor—Pentium 4 or equivalent
RAM—

Windows XP: 1 GB
Windows 7/Windows Vista: 1 GB

Gigabit Ethernet interface
Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 7/Vista/XP with all available critical updates and service packs

Recommended System

Processor—Core II Duo or equivalent
RAM—

Windows XP: 2 GB
Windows 7/Vista: 2 GB

Dedicated gigabit Ethernet interface for each device
A screen resolution of 1,024 x 768
Windows 7/Vista/XP with all available critical updates and service packs

Application Development Environment (ADE)

LabVIEW 2009 SP1 (32-bit), 2010 SP1 (32-bit), 2011 SP1 (32-bit), 2012 SP1 (32-bit)

Installed File Names and Locations

<NIDir32> is an alias for the following National Instruments file folder location:

Windows 7 (32-bit)/Vista (32-bit)/Windows XP: Program FilesNational Instruments
Windows 7 (64-bit)3/Vista (64-bit)3: Program Files (x86)National Instruments

<SystemDir32> is an alias for the following file folder location:

Windows 7 (32-bit)/Vista (32-bit)/Windows XP: WindowsSystem32
Windows 7 (64-bit)3/Vista (64-bit)3: Windowssyswow64

3 These software versions run within the 32-bit emulation layer, Windows on Windows (WOW64).

File Locations

Item	Installed Location
NI-USRP	<NIDir32>NI-USRP
NI-USRP Utilities	<NIDir32>NI-USRPutilities
NI-USRP Examples	<NIDir32>LabVIEW<version>examplesinstr iUSRP
NI-USRP Header files	<NIDir32>NI-USRPincludes
NI-USRP Import Library files	<NIDir32>NI-USRPlibmsc
NI-USRP DLL	<SystemDir32> iusrp.dll
NI-USRP Firmware and FPGA images	<NIDir32>NI-USRPimages

Note The NI Example Finder does not include NI-USRP examples.

Documentation

The product documentation is available at Start»Programs»National Instruments»NI-USRP»Documentation. The documentation set is composed of the following documents:

NI-USRP Readme
NI USRP-29xx Getting Started Guide—Printed and PDF format. Contains hardware and software installation and configuration information.
NI-USRP Help—HTML help format. Contains digital communication system fundamentals, hardware device overview, programming information, and LabVIEW reference.
NI-USRP Specifications—PDF format. Lists specifications for NI-USRP devices.
Read Me First: Safety and Electromagnetic Compatibility—Printed format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.

Note To view the specifications, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Updates and Notifications

National Instruments releases critical software updates after product release using the NI Update Service. Visit ni.com/info and enter updates to view a list of all currently available updates.

National Instruments provides notification of certain critical issues at install time. Visit ni.com/info and enter notifications to view a list of current product notifications.

Uninstalling/Modifying NI-USRP

Perform the following procedure to uninstall NI-USRP.

For Windows XP, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Add or Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-USRP 1.2 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 7/Vista, complete the following steps:

Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-USRP 1.2 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.

Note Do not attempt to uninstall by manually deleting files.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-USRP 1.2 Known Issues at ni.com for an up-to-date list of known issues.

Bug Fixes

The following items are changes in NI-USRP 1.2 from NI-USRP 1.1.

ID	Fixed Issue
376069	Fixed an issue that caused the property node "Number of Samples is Finite" to always return a "false" value regardless of whether the task was set as finite or continuous.
370383	Fixed an issue that caused a multi-device session to fail. Remove any trailing semicolons in lists of devices. For example, use "192.168.10.2; 192.168.10.3" instead of "192.168.10.2; 192.168.10.3;".
362726	Fixed an issue that caused LabVIEW to crash after configuring the number of samples in niUSRP EX Rx Continuous Async.vi.

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the <National Instruments>_Legal InformationMicrosoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the <National Instruments>CommonMDFEULADepotNIReleased directory for more information.

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFEULAs directory.
Review <National Instruments>_Legal Information_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

NI-USRP 1.2 Driver Win32Eng NI通用软件无线电外设仪器驱动程序1.2下载