Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-488.2Driver17.6.0f0 Windows/Real-Time Full and Run-time 美国国家仪器IEEE488.2仪器驱动17.0 Windows/实时系统完整版及运行时下载
NI-488.2为使用NI GPIB控制器和带有GPIB端口的NI嵌入式控制器的客户提供支持。
NI-488.2仪器驱动程序包含了几个实用程序，用于应用程序开发和调试。NI-488.2包含了可自动处理所有总线管理的高级命令，因而用户就无需了解GPIB硬件产品或IEEE 488.2协议的编程细节。为了提供最大灵活性和功能，NI-488.2还包含了底层命令。
百度网盘下载：
完整版：
链接：请注册视觉论坛会员登陆后购买附件下载查看
提取码：请购买附件下载查看
运行时：
链接：请注册视觉论坛会员登陆后购买附件下载查看
提取码：请购买附件下载查看
NI官方下载地址（可能无效或无法下载完成）：
完整版：
请购买附件下载查看链接
运行时：
请购买附件下载查看链接
NI-488.2Driver17.6.0f0 Windows/Real-Time Full and Run-time 美国国家仪器IEEE488.2仪器驱动17.0 Windows/实时系统完整版及运行时下载
http://pcmv.cn/thread-22946-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-488.2 for Windows 17.6 Readme
January 2018
This file contains important information about NI-488.2, including installation instructions, new features, and a partial list of bugs fixed for NI-488.2.
This readme contains the following main sections:
Supported Operating Systems
Application Software Support
Supported Hardware
Installation Instructions
Product Security and Critical Updates
Known Issues
Enhancements and Bug Fixes
Version 17.6
Version 17.0
Version 16.0
Version 15.5
Version 15.0
Version 14.0
Accessing the Help
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Supported Operating Systems
NI-488.2 supports the following operating systems:
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Known Compatibility Issues with Windows 8
NI-488.2 has known compatibility issues with the Fast Startup feature introduced in Windows 8. Leaving Fast Startup enabled can cause GPIB hardware and NI-488.2 driver software to function improperly. To prevent problems with installing or removing hardware, National Instruments recommends disabling Fast Startup. The NI-488.2 for Windows, Version 15.5 installer disables Fast Startup by default. For more information about this issue, visit ni.com/info and enter the Info Code Win8FastStartup.
Known Driver Issues with Windows Upgrade
Upgrading Windows on a system with NI-488.2 already installed renders DOS Support unusable. To fix this issue, run installation repair. If the driver cannot attach to GPIB hardware, run installation repair a second time.
Win16 and DOS Support
Win16 and DOS support are available on 32-bit Windows operating systems.
Application Software Support
The following table lists the application software versions, including service packs, that NI-488.2 supports. If you are not using NI application software, refer to Microsoft Visual Studio Support.
| Application Software | Versions Supported by Product |
| NI-VISA | 17.51 |
| LabVIEW | 2014, 2015, 2016, 2017 |
| LabVIEW NXG | 2.0 |
| LabWindows™/CVI™ | 2012, 2013, 2015, 2017 |
| Measurement Studio | 2012, 2013, 2015 |
| 1 Any version of NI-VISA prior to 5.1 on your system may cause NI-488.2 usability issues. Upgrade to NI-VISA version 5.1 or later before using any NI-488.2 devices. |
Note: NI I/O Trace 17.0 and later support NI-488.2 17.0. Previous versions of NI I/O Trace do not support NI-488.2 17.0 or later.
Microsoft Visual Studio Support
If you are using the NI-488.2 .NET Class Library, .NET Framework 4.0 (minimum) is required. The NI-488.2 .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0 or .NET Framework 4.5.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.
Microsoft Visual Basic 6.0 Support
NI-488.2 supports 32-bit Visual Basic 6.0 application development. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help.
Unmanaged C/C++ Support
NI-488.2 supports 32-bit and 64-bit GPIB applications using Microsoft Visual C++ 2005 and later. Microsoft Visual C/C++ 6.0 and Microsoft Visual Studio .NET 2003 only support 32-bit GPIB applications. For more information, refer to the Language-Specific Programming Instructions topic in the NI-488.2 Help.
Supported Hardware
The following list contains the NI hardware supported by NI-488.2 on Windows:
GPIB-ENET/1001
GPIB-ENET/1000
GPIB-USB-B1
GPIB-USB-HS
GPIB-USB-HS+
NI ExpressCard-GPIB
NI PCIe-GPIB
NI PCIe-GPIB+
NI PCI-GPIB
NI PCI-GPIB+
NI PCI-GPIB/LP
NI PCI-82121
NI PCI-8232
NI PMC-GPIB
NI PXI-GPIB
NI PXI-82121
NI PXI-8232
1 This hardware is end-of-life and not recommended for new designs.
Installation InstructionsInstalling NI-488.2 for LabVIEW
You can install all of your LabVIEW products—including NI-488.2—using the LabVIEW Platform media.
To request additional LabVIEW Platform media, refer to the NI website.
Note
If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/info and enter the Info Code exjq43 for more information and steps to resolve this issue.
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Installing NI-488.2 for LabVIEW NXG
NI automates LabVIEW NXG installation using NI Package Manager. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Known Issues
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in NI-488.2 Version 17.6.
Enhancements and Bug Fixes in Version 17.6The Following Issues Were Resolved in NI-488.2 17.6
670170: A hang might occur during an I/O operation if a Service Request is stuck when Autopolling is happening.
647895: As a result of an issue introduced in a previous version of NI-488.2, ibnotify for a Service Request may cause a hang when the service request event occurs.
Enhancements and Bug Fixes in Version 17.0
Support for HLK signing for Windows 10.
Support for Borland C dropped.
Enhancements and Bug Fixes in Version 16.0
The following issues were resolved in NI-488.2 16.0
582112: In rare cases, connecting a GPIB-USB-HS+ interface to a system could cause the computer to crash.
569142: Installer indicates that NI I/O Trace is required for NI-488.2.
Enhancements and Bug Fixes in Version 15.5
The Following Issues Were Resolved in NI-488.2 15.5
433395: Extra delay on ibwait and ibstop was removed for GPIB Ethernet-based hardware.
538997: An NI4882 API call in a multithreaded or multiprocess application results in an unexpected error due to unprotected API calls when opening a device handle.
542306: When an application exits while there is asynchronous IO pending on ENET interfaces, the application crashes.
557236: GPIB Analyzer crashes when exporting a large capture to a text file.
Enhancements and Bug Fixes in Version 15.0
Updated Experience in NI-MAX
The configuration experience in Measurement & Automation Explorer (MAX) has been updated to improve consistency with other NI products. Significant changes include:
GPIB properties have been moved to the Settings page for GPIB interfaces.
It is no longer necessary to run MAX as Administrator to change GPIB settings.
Reset and Self-Test features are now available for all GPIB interfaces from within MAX.
NI-488.2 DOS Support is no longer configurable through MAX; DOS Support is enabled by default on all compatible systems. Refer to the NI-488.2 documentation for instructions to manually disable NI-488.2 DOS Support.
Scan for Instruments no longer displays instruments at the bottom of the properties page, which has been removed. Discovered instruments only appear in the Devices & Interfaces tree beneath the GPIB interface.
GPIB-ENET/100 and GPIB-ENET/1000 interfaces now display additional information such as IP address and serial number.
Performance of MAX has been improved during startup and when expanding Devices & Interfaces tree.
GPIB-ENET/100 and GPIB-ENET/1000 interfaces which cannot be reached are marked as unavailable; some operations are disabled while they are offline. (386556)
Windows display language can now be changed without adverse affecting GPIB labels as they appear in MAX. (428596)
MAX now displays network info for GPIB-ENET/1000 interface that is configured with .local address. (409559)
Web Configuration
GPIB interfaces are now fully configurable through the NI Web Configuration interface. Self-Test has also been added.
Removed Troubleshooting Utility
The NI-488.2 Troubleshooting Utility has been removed. GPIB interfaces may be tested using the Self-Test feature in Measurement & Automation Explorer, or programmatically through the System Configuration API.
Improved Behavior When USB Transaction Errors Occur
506688: The NI-488.2 driver is unable to recover from certain types of USB errors. These errors may occur on some systems when other USB devices are added or removed from the system while a GPIB operation is in progress. In prior versions of NI-488.2, this could lead to a hang in the process using a USB-to-GPIB interface. It could also result in a hang or blue screen error on system shutdown. This scenario now results in an EDVR error when an unrecoverable USB error occurs. To restore operation, the USB connection to the GPIB interface should be removed and reinserted, and the GPIB handle should be closed and re-opened.
The Following Issues Were Resolved in NI-488.2 15.0
518983: As a result of an issue introduced in NI-488.2 14.0, GPIB-USB-B or GPIB-USB-HS I/O bus communication can hang until the handle to the GPIB interface is closed when all of the following conditions are true:
The affected interface is not CIC (Controller in Charge)
A read or write is in progress
An ibwait including the DCAS bit is in progress
A device clear is received during the I/O transfer
507376: Installer hang might occur during installation of NI software on systems with NI-488.2 14.0 already installed.
478063: GPIB-USB-HS+ might become unresponsive upon rebooting in a virtual machine.
121091: Calling ibonl when a board level ibwait is in progress could result in application crash.
121181: A deadlock might occur when attempting to use a board handle with pending ibonl call on another thread.
476357: GPIB Ethernet Wizard can incorrectly add GPIB-ENET/1000 with hostname even if it is not reachable.
476487: GPIB Ethernet Wizard icon does not appear on Windows task bar.
Enhancements and Bug Fixes in Version 14.0
New Hardware Support
This release adds support for the GPIB-USB-HS+ GPIB controller and Analyzer. Along with this, the NI GPIB Analyzer utility has undergone changes to allow it to work with the new analyzer hardware. The NI GPIB Analyzer utility allows simultaneous use of multiple GPIB-USB-HS+ analyzers, along with up to one non-USB GPIB analyzer.
Windows Server Support
This release adds support for Windows Server 2012 R2. Refer to the Supported Hardware section for the list of supported hardware.
API Integer Type Changes
The integer types used in the NI4882 API (ni4882.h) have been updated. All uses of unsigned long have been replaced with unsigned int. These types are functionally identical with all supported compilers, and this change improves the portability of 64-bit GPIB applications to other platforms. Users of ibnotify will need to update the function prototypes for callback functions. In most other cases applications will compile cleanly. This change is fully binary-compatible with applications built against previous versions of NI-488.2 and does not impact users of the GPIB-32 API (ni488.h).
Runtime Installer
NI-488.2 for Windows is now available in a smaller Runtime form. The NI-488.2 Runtime is a minimal installation which does not include many of the utilities and supporting software included with the full NI-488.2 distribution. When building installers from LabVIEW or other NI development environments, you will now have the option of including this smaller subset of NI-488.2 in your distribution.
The Following Issues Were Resolved in NI-488.2 14.0
319093: Attempting to bring a non-existent device online after setting the IbcSendLLO board configuration option causes an ENOL error instead of EBUS. This problem impacted all USB based GPIB interfaces. This has been fixed.
122997: The EOIP status bit could remain set incorrectly if an ibwrta or ibrda call returned an EDVR error.
171688: An ibnotify callback could fail to be triggered by END if the notify condition included END but not CMPL.
205182: Asynchronous transfers could sometimes report EABO even though the transfer completed successfully.
372832: A callback from ibnotify might not be invoked after an asynchronous transfer was completed if the notify mask only contained END.
374822: Calling ibonl while ibnotify is pending could cause the process to crash under some circumstances.
380705: Aborting an ibrda very quickly after starting it could allow a PCI-based GPIB interface to receive data when addressed as a listener, without a read in progress. This data was lost, and could not be recovered.
404267: In some situations, the GPIB-ENET/1000 could hang while performing asynchronous transfers. This included fixes in both the NI-488.2 driver and the GPIB-ENET/1000 firmware. Users of the GPIB-ENET/1000 should update the GPIB-ENET/1000 firmware to version 1.1.0 to receive the full benefit of this fix.
405414: In some cases the DCAS bit was not correctly cleared after being reported, causing it to be reported with subsequent calls.
418661: In some situations, when an ibnotify callback function was triggered due to the completion of an asynchronous transfer, the ibcnt and ibcntl variables would be incorrect.
425931: Calling ibstop with an asynchronous operation in progress would sometimes not report an EABO error as expected.
464114: When using a GPIB-USB-B controller, the call immediately following an ibstop call could be incorrectly aborted.
463966: Severe performance degradation when performing large writes to GPIB-USB-HS hardware through USB 3.0 ports on Windows 7.
332479: On GPIB-USB-B and GPIB-USB-HS controllers, the first I/O operation after device insertion could be terminated prematurely.
240000: On GPIB-USB-B and GPIB-USB-HS controllers, ibwait and ibnotify could fail to detect the CIC, LACS, and TACS bits.
191044: The GPIB Analyzer did not automatically append the correct file extension when saving a capture.
87073: The GPIB Analyzer did not prompt to save if the application is closed while capturing data.
Accessing the Help
Refer to the NI-488.2 Help, accessible by selecting National Instruments»NI-488.2»GPIB Help from the Windows menu bar.
LabVIEW NXG Support and Considerations
The following sections detail considerations for using LabVIEW NXG with NI-488.2.
LabVIEW NXG Operating Systems and System Requirements
Software support for LabVIEW NXG differs in the following ways:
LabVIEW NXG Hardware Support
Support differs for the following devices in LabVIEW NXG:
LabVIEW NXG Help
View context help in LabVIEW by pressing <Ctrl-H> and hovering over an object.
Search for items using the search bar in the upper right corner of the LabVIEW window. You can also view context help for the search results.
Additional documentation is available online at ni.com/manuals.
LabVIEW NXG Examples
Launch LabVIEW and click the Learning tab.
LabVIEW lessons are located in the Lessons tab, and LabVIEW Examples are located in the Examples tab. Follow the instructions in the lessons and examples.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 1995–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375742E-01
NI-488.2 for LabVIEW Real-Time, Version 17.6 Readme
January 2018
This file contains release notes, patent information, and last-minute information for NI-488.2 for LabVIEW Real-Time, Version 17.6. Some information in this file may be too recent to be included in the official documentation set.
This readme contains the following main sections:
Compatible Software
Supported Hardware
Enhancements and Bug Fixes
Version 17.6
Version 17.0
Version 16.0
Version 15.5
Version 15.0.1
Version 15.0
Version 14.0
Driver Version Naming Changes
Contacting National Instruments
Legal Information
Compatible Software
This driver version is recommended for use with the following National Instruments software:
Supported Hardware
NI-488.2 for LabVIEW Real-Time, Version 17.6, supports the following GPIB interfaces:
Desktop RT with NI PCI-GPIB
Desktop RT with NI PCIe-GPIB
NI PXI controller with built-in GPIB
NI PMC-GPIB
NI PXI-8212
NI PXI-8232
NI PXI-GPIB
Enhancements and Bug Fixes in Version 17.6The following issues were resolved in NI-488.2 17.6
670170: A hang might occur during an I/O operation if a Service Request is stuck when Autopolling is happening.
Enhancements and Bug Fixes in Version 17.0LabVIEW Real-Time 2017
NI-488.2 for LabVIEW Real-Time, Version 17.0, adds support for LabVIEW Real-Time 2017.
Enhancements and Bug Fixes in Version 16.0LabVIEW Real-Time 2016
NI-488.2 for LabVIEW Real-Time, Version 16.0, adds support for LabVIEW Real-Time 2016.
Enhancements and Bug Fixes in Version 15.5The following issues were resolved in NI-488.2 15.5
Issues resolved in NI-488.2 15.0.1 were ported to the NI-488.2 for LabVIEW Real-Time, Version 15.5 release.
Enhancements and Bug Fixes in Version 15.0.1The following issues were resolved in NI-488.2 15.0.1
547340: GPIB ports may not be reported in NI MAX, Web Configuration, and System Configuration API with NI-488.2 15.0.0.
Enhancements and Bug Fixes in Version 15.0Updated experience in Measurement & Automation Explorer (MAX)
The configuration experience in MAX has been updated to improve consistency with other NI products. Self-Test has also been added for GPIB interfaces.
Web configuration
GPIB interfaces are now fully configurable through the NI Web Configuration interface. Self-Test has also been added.
The following issues were resolved in NI-488.2 15.0
121091: Calling ibonl when a board level ibwait is in progress could result in application crash.
121181: A deadlock might occur when attempting to use a board handle with pending ibonl call on another thread.
Enhancements and Bug Fixes in Version 14.0The following issues were resolved in NI-488.2 14.0
122997: The EOIP status bit could remain set incorrectly if an ibwrta or ibrda call returned an EDVR error.
205182: Asynchronous transfers could sometimes report EABO even though the transfer completed successfully.
405414: In some cases the DCAS bit was not correctly cleared after being reported, causing it to be reported with subsequent calls.
Driver Version Naming Changes
NI-488.2 versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the driver was released and the most recent software version the driver was designed to work with. Driver versions now start with a two-digit year indicator: <;ProductName><Year-BasedVersion>. The last version released under the old numbering scheme was NI-488.2 3.1.2. The first version released under the new numbering scheme was NI-488.2 14.0.
Contacting National Instruments
Thank you for your interest in NI-488.2 for LabVIEW Real-Time. We appreciate communicating with the people who use our products. We are also very interested in hearing about the applications you develop using our products. Our Web site, ni.com, provides advanced support and services and contact information.
Legal Information
Copyright
© 1995–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375741D-01
