石鑫华视觉
NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0
RFmx VNA
RFmx VNA可通过PXIe-5633矢量网络分析仪(VNA)测量单端口或双端口S参数。
RFmx VNA是一款测量专用软件，扩展了NI RF仪器软件的功能，可帮助您使用PXIe-5633矢量网络分析仪测量散射参数（S参数）。借助RFmx VNA，您可以对典型RF前端模块中的RF组件（如放大器、天线、滤波器、衰减器和其他DUT）执行复杂的单端口和2端口S参数测量。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI RFmx VNA 2024 Q4
发布日期：2024/10/8
包含的版本：2024 Q4完整版/运行版，版本号24.8.0
受支持的操作系统：
Windows 11
Windows Server 2022 64-bit
Windows 10 64-bit
Windows Server 2019 64-bit
语言：English
应用程序位数：64位
64位完整版校验和：
文件大小: 2140813312 字节 (1.99 GB)
修改日期: 2024-10-17 11:39
MD5: f72caf71115f6fc483301e9182a9d4b2
SHA1: d4579e9affc2d0fa5b7fbc9b38732ac378414aa7
SHA256: 34d84bae1081dca64b5d871bbe1e2401677a0c74288d3a389e43ec25c4c8aa9d
CRC32: fef8e17f
百度网盘和NI官方下载地址：
请注册登录视觉机器论坛用户，购买附件查看下载地址
NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0
http://visionbbs.com/thread-32165-1-1.html
(出处: 石鑫华视觉论坛)
64位运行版校验和：
文件大小: 856432640 字节 (816.76 MB)
修改日期: 2024-10-17 11:37
MD5: ad8a61dbef67c4013e47d3b989580b30
SHA1: 184e0fb6adf760b6f77cb0ba354a35872237f56a
SHA256: 01458ef04c0abc79205df6f6031c6afe6ec4ae8dfc6dcf644768e687a3976d4b
CRC32: fcd8ee08
百度网盘和NI官方下载地址：
请注册登录视觉机器论坛用户，购买附件查看下载地址
NI RFmx VNA 2024 Q4 Win11 64bitENG RFmx矢量网络分析仪24.8.0
http://visionbbs.com/thread-32165-1-1.html
(出处: 石鑫华视觉论坛)
RFmx VNA 2024 Q4 New Features and Changes
New Features
Support to specify polar format for S-parameters and Waves.
Support to query S-parameters and waves in concise notation.
Support for interpolation of corrected S-parameters and waves measurements.
Support to query correction state.
Changes
The following fetch VIs are deprecated:
RFmxVNA SParams Fetch Real Data.vi
RFmxVNA SParams Fetch Complex Data.vi
RFmxVNA Waves Fetch Real Data.vi
RFmxVNA Waves Fetch Complex Data.vi
TipUse the following VIs to fetch measurement data:
TipUse the following VIs to fetch measurement frequency:
RFmxVNA SParams Fetch X Data.vi
RFmxVNA Waves Fetch X Data.vi
RFmxVNA SParams Fetch Y Data.vi
RFmxVNA Waves Fetch Y Data.vi
The PXIe_DStarB option for Pulse Generator Trigger terminal export is deprecated.NoteUse PXIe_DStarC instead.
The Undefined Thru Using Defined Thru option for Correction:Calibration:Thru:Method is deprecated.
The Delay Thru Using Defined Thru option for Correction:Calibration:Thru:Method has been replaced by vCal Thru as Unknown Thru
RFmx VNA 2024 Q3 New Features and Changes
New Features
Support for List, Linear, and Segmented Sweep types
Support for exporting S-parameter measurement results as SnP files
Support for SWR, Impedance, and Admittance formats for S-parameters
Support for exporting Pulse Generator events
Support for aborting an ongoing calibration step
Behavior Changes
Deprecated RFmxVNA Configure Frequency List (Start Stop Points).vi.NoteTo work around this change, configure Sweep Type to Linear, and configure Start Frequency (Hz), Stop Frequency (Hz), and Number of Frequency properties.
You can no longer obtain the underlying list of aggregated frequencies across all active segments using the Sweep:Frequency List attribute.NoteUse the Sweep:X-Axis Values read-only attribute instead.
The Complex format in InstrumentStudio is no longer plotted as a Smith Chart. It is now plotted as a polar chart.NoteTo plot a Smith chart, set the format to Smith Impedance or Smith Admittance.
RFmx VNA 2024 Q2 New Features and Changes
Support for external triggers for VNA measurements
Support for saving and loading stimulus settings along with Calset
Support for enabling and disabling automatic scaling down of Intermediate Frequency Bandwidth (IFBW) at low frequencies for measurement speed
Support for caching multiple signal switch for measurement speed
Support for guided calibration using Mechanical Calkits defined by NI Calkit files (.nckt )
Support for basic pulsed S-parameter and waves measurements with internal pulse-trigger
Support for embed fixtures to Calsets
Support for creating and editing Calkit files for Mechanical Calkits using the standalone Calkit Editor application.
Obsoleted the RFmxInstr Load All Configurations VI. Use the RFmxInstr Load Configurations VI along with the appropriate RFmxInstr Load Options property, instead.
RFmx VNA 2024 Q1 New Features and Changes
Calibration: User-defined orientation for Cal-5501
Calsets
Load one or more named calsets from calset files previously saved
Select an active calset from the pool of loaded named calsets
Query the names of all loaded named calsets
Create a named copy of another named or unnamed calset
Query the error terms stored in a calset
Support for RFmxVNA SParams and RFmxVNA Waves measurements to perform as composite measurements
Added port extension support to specify electrical-length as delay (in seconds) and compensate for constant loss
IVI simulation support for PXIe-5633
RFmx VNA 2023 Q4 Features Overview
Measure corrected and uncorrected 1-port or 2-port S-parameters and receiver waves for non-frequency-converting RF devices over a list of frequencies
Fixture de-embedding
Point averaging
Automatic Short-Open-Load (SOL) and Short-Open-Load-Through (SOLT) calibration using Cal-5501 Vector Calibration Module
Saving and loading calibration error terms as a calset file
Support for PXIe-5633
Support for obtaining unprocessed I/Q data utilized for RFmx measurements