石鑫华视觉
NI Linux Real-Time Offline Installation Support 20.5.1 Win64多国语言 NI Linux Real-Time离线安装支持20.5.1
NI Linux Real-Time离线安装支持用于支持离线访问NI Linux Real-Time终端驱动程序。
NI Linux Real-Time离线安装支持是一个软件工具，当上位机或目标无法访问ni.com或其他已发布的feed时，该软件可帮助您在NI Linux Real-Time终端上安装NI驱动程序。注册商标Linux的使用获得了Linus Torvalds专属授权商LMI的再授权，Linus Torvalds拥有Linux注册商标在全球范围内的所有权。
使用LabVIEW Real-Time模块的三大理由:
1. 将LabVIEW图形化编程扩展至独立的嵌入式系统
LabVIEW Real-Time包含了用于多线程和实时线程调度的内置结构，以帮助您高效地编写稳定、确定的代码。 您可对独立式系统进行图形化编程，使其更长时间地可靠运行。
2. 利用实时操作系统实现精确的定时和高可靠性
通用操作系统并不适用于需要严格定时的重要应用。 LabVIEW Real-Time可支持运行NI Linux Real-Time、VxWorks或Phar Lap ETS实时操作系统(RTOS)的NI嵌入式硬件。
3. 利用各类IP和实时硬件驱动
您可使用数百个预编写的LabVIEW函数库，比如PID控制和FFT，并用于独立式系统。 NI还提供了大量实时硬件驱动程序和LabVIEW API，适用于大多数NI I/O模块，以实现确定的数据采集。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html
NI Linux Real-Time Offline Installation Support 20.5.1
发布日期：2022/3/25
包含的版本：20.5.1完整版，版本号20.5.1
受支持的操作系统：
Windows 7 (SP1) 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
应用程序位数：64位
语言：英文
校验和：
文件大小: 4102352896 字节 (3.82 GB)
修改日期: 2022-03-25 16:18
MD5: 038dadc1df59bdc729655025c3cafa31
SHA1: ebc1dc9dda88d0feb5ba9a8a7bcc3fa5743a9b98
SHA256: 3da3dfa8618a013e6a04ae97a44fa2612cf2ecafc9692521d1532ea0f6237a85
CRC32: 13564d39
百度网盘和NI官方下载地址：
请注册视觉论坛用户，登录后购买附件下载查看，充值请联系在线客服
NI Linux Real-Time Offline Installation Support 20.5.1 Win64多国语言 NI Linux Real-Time离线安装支持20.5.1
http://visionbbs.cn/thread-31370-1-1.html
(出处: 石鑫华视觉论坛)
NI Linux Real-Time Offline Installation Support 20.5 Readme
September 2020
This file contains important information about the NI Linux Real-Time Offline Installation Support, including installation instructions and supported hardware.
Overview
System Requirements
Supported Operating Systems
Software Support
Installation Instructions
Supported Hardware
Product Security and Critical Updates
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Linux Real-Time Offline Installation Support Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
Legal Information
Overview
NI Linux Real-Time Offline Installation Support installs the necessary software to manage an offline NI Linux Real-Time target.
System Requirements
NI Linux Real-Time Offline Installation Support 20.5 has the following requirements:
At least 4.0 GB of disk space
Note NI Linux Real-Time must be installed on the real-time target.
Supported Operating Systems
NI Linux Real-Time Offline Installation Support 20.5 supports the following operating systems:
Windows 10/8.11/7 SP12
Windows Embedded Standard 7 SP12
Windows Server 2016
Windows Server 2012 R21
Windows Server 2008 R2 SP12
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note Refer to NI Linux Real-Time Offline Installation Support Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.
Software Support
NI Linux Real-Time Offline Installation Support 20.5 supports the following software versions.
Software | Versions Supported by NI Linux Real-Time Offline Installation Support 20.5 |
| MAX | 20.0 |
| NI Linux Real-Time System Image | 20.5 |
Installation InstructionsInstallation on Machines with ni.com Access
If the PC you need to install the NI Linux Real-Time Offline Installation Support on can access ni.com, refer to the following installation instructions.
NI installs NI Linux Real-Time Offline Installation Support using NI Package Manager. If you do not already have NI software installed, NI Linux Real-Time Offline Installation Support installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Note: To begin your software download using NI Package Manager, click the Download button, located in the right sidebar of the download page. If you prefer to install from a downloaded ISO file, refer to the Installation on Machines without ni.com Access section.
For more detailed installation instructions and additional information, refer to Installing Software on NI Linux Real-Time Targets.
Installation on Machines without ni.com Access
If the PC you need to install the NI Linux Real-Time Offline Installation Support on cannot access ni.com, refer to the following installation instructions:
Locate a PC with access to ni.com and go to ni.com/downloads.
Click the Individual Offline Installers link on the download page to download NI Linux Real-Time Offline Installation Support as an ISO file.
Note: The Individual Offline Installers link is located in the informational note in the right sidebar of the download page below the Download button, which downloads software using NI Package Manager.
Transfer the ISO file to the PC without ni.com access.
Install NI Linux Real-Time Offline Installation Support from the ISO file.
For more detailed installation instructions and additional information, refer to Installing Software to Offline NI Linux Real-Time Targets.
Supported Hardware
The following list details the hardware models supported in NI Linux Real-Time Offline Installation Support 20.5:
CompactDAQ Controller
cDAQ-9132
cDAQ-9133
cDAQ-9134
cDAQ-9135
cDAQ-9136
cDAQ-9137
CompactRIO Controller
cRIO-9030
cRIO-9031
cRIO-9032
cRIO-9033
cRIO-9034
cRIO-9035
cRIO-9035 Sync
cRIO-9036
cRIO-9037
cRIO-9038
cRIO-9039
cRIO-9039 Sync
cRIO-9040
cRIO-9041
cRIO-9042
cRIO-9043
cRIO-9045
cRIO-9046
cRIO-9047
cRIO-9048
cRIO-9048 (TPM)
cRIO-9049
cRIO-9053
cRIO-9054
cRIO-9055
cRIO-9056
cRIO-9057
cRIO-9058
cRIO-9063
cRIO-9064
cRIO-9065
cRIO-9066
cRIO-9067
cRIO-9068
CompactRIO Single-Board Controller
sbRIO-9607
sbRIO-9627
sbRIO-9637
sbRIO-9651
sbRIO-9603
sbRIO-9608
sbRIO-9609
sbRIO-9628
sbRIO-9629
sbRIO-9638
Academic
NI ELVIS RIO CM
NI ELVIS III
CompactRIO Chassis
NI 9147
NI 9149
Controller for FlexRIO
NI 7931
NI 7932
NI 7935
PXI Hardware
Refer to NI Linux Real-Time Operating System PXI Hardware Support.
USRP Software Defined Radio Stand-Alone Device
USRP-2974
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
LabVIEW NXG Support and Considerations
The following sections detail considerations for using LabVIEW NXG 5.0 with NI Linux RT System Image 20.5.
LabVIEW NXG Operating Systems and System Requirements
Software support for LabVIEW NXG differs in the following ways:
System requirements—Only 64-bit (x64) processors are supported.
Operating system—Only 64-bit operating systems are supported. Refer to the Supported Operating Systems section for more information.
LabVIEW NXG Hardware Support
NI Linux RT System Image 20.5 supports the following devices in LabVIEW NXG 5.0
CompactRIO Controller
cRIO-9040
cRIO-9041
cRIO-9042
cRIO-9043
cRIO-9045
cRIO-9046
cRIO-9047
cRIO-9048
cRIO-9048 (TPM)
cRIO-9049
cRIO-9053
cRIO-9054
cRIO-9055
cRIO-9056
cRIO-9057
cRIO-9058
USRP Software Defined Radio Stand-Alone Device
USRP-2974
===================================================
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
NI Linux Real-Time Offline Installation Support Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
NI Linux Real-Time Offline Support will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
Legal Information
Copyright
© 2020–2020 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
378289C-01