NI mmWave OTA Validation Test Software 23.0 x64Win10 64bitEng NI毫米波空口验证测试软件23.0

mmWave OTA验证测试软件
mmWave OTA验证测试软件可简化并加速5G封装天线波束成形器件的特性分析和验证测试。
mmWave OTA验证测试软件是一款应用软件，可帮助您配置、运行、可视化和报告5G mmWave封装天线集成电路(IC)空口(OTA)辐射性能。该软件可以执行系统校准，以测量每个信号路径的路径损耗，进而补偿测试仪器、电缆、天线和空口通信。此外，mmWave OTA验证测试软件还根据3GPP测试规范简化了配置和运行3D空间扫描的过程。您可以使用模板自定义测试序列，以自动执行数据采集、结果报告和存储。该软件包括一系列可视化工具，包括天线方向图、3D和极坐标图、波束宽度、热图等。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://visionbbs.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://visionbbs.com/thread-26524-1-1.html

发布日期：2023/5/29
包含版本：23.0.0完整版（此版本只支持到LabVIEW2021SP1，并不支持LabVIEW2023Q1，即LV23.0。而有些模块驱动软件则又是需要2023Q1版。请查看Readme自述文件了解清楚）
受支持的操作系统
Windows 10 64-bit
应用程序位数：64位
语言：英文
校验和：
文件大小: 810881024 字节 (773.32 MB)
修改日期: 2023-05-29 21:50
MD5: 763604db4bf9b7f634cef4a5c5e0bc14
SHA1: 825777b4b39bacef4b75033c0f48d2b4b4726734
SHA256: 901785858170b24d376cd0bd6adb13c36aa185a506bbea12d77b633e58d06d97
CRC32: d4af7415

百度网盘和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址

NI mmWave OTA Validation Test Software 23.0 x64Win10 64bitEng NI毫米波空口验证测试软件23.0

http://visionbbs.com/thread-30706-1-1.html?fromuid=9

(出处: 机器视觉论坛)

mmWave OTA Validation Test Software 23.0 Readme

May 2023

This file contains installation instructions and compatibility information for mmWave OTA Validation Test Software 23.0.

You can find more release information on ni.com.

• mmWave OTA Validation Test Software Release Notes: Known issues, bugs fixed since the last release, and other notes about this release
  

Overview

New Features

Required Software

Supported Operating Systems

Installation Instructions

Product Security and Critical Updates

Supported Hardware

Accessing the Documentation

Finding Installed Software

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Overview

This software installation provides support for the mmWave OTA Validation Test Reference Architecture and helps you configure, run, visualize, and report the over-the-air (OTA) radiated performance of 5G mmWave antenna-in-package (AiP) integrated circuits.

mmWave OTA Validation Test Software can perform system calibration to measure the path losses of every signal path, compensating for test instruments, cables, antennas, and air interface. Additionally, mmWave OTA Validation Test Software simplifies the process of configuring and running 3D spatial sweeps according to 3GPP test specifications. You can use templates to customize test sequences to automate data collection, results reporting, and storage. The software also includes a collection of visualization tools for antenna pattern cuts, 3D and polar plots, beamwidth, heat map, and more.

New Features

mmWave OTA Validation Test Software 23.0 adds the following new feature:

• Extends measurement frequency to 50 GHz by adding support for PXIe-5842 Vector Signal Transceiver with 54 GHz Frequency Extension
  

Required Software

mmWave OTA Validation Test Software 23.0 requires the following software versions.

†  If you are using the mmWave OTA Validation Test C# .NET API, MATLAB examples, and Python examples, .NET Framework 4.6.2 (minimum) is required. To use the .NET API, you must also install .NET support for the required drivers.

Refer to the documentation of each software product for specific system requirements.

Supported Operating Systems

mmWave OTA Validation Test Software 23.0 supports Windows 10 (64-bit).

Installation Instructions

Download the mmWave OTA Validation Test Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Documentation for more information about installing, removing, and upgrading NI software using Package Manager.

Note  Use the serial number that is included with your software to activate mmWave OTA Validation Test Software. For more information on mmWave OTA Validation Test Software activation, refer to Activating a Product.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

Supported Hardware

mmWave OTA Validation Test Software supports the mmWave OTA Validation Anechoic Chamber, the MilliBox™ Chambers and positioners, and all instruments used with the mmWave OTA Validation Test Reference Architecture. Refer to the mmWave OTA Validation Test Reference Architecture Manual for a full list of supported instruments.

Accessing the Documentation

The mmWave OTA Validation Test Reference Architecture Manual is restricted on ni.com. Refer to the installed documentation for how to access the online library for user documentation for using mmWave OTA Validation Test Software. The mmWave OTA Validation Test Reference Architecture documentation is accessible from Start»National Instruments»OTA Documentation.

Finding Installed Software

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager documentation.

Using NI Software with Microsoft Windows 10

For more information about NI support for Windows 10, refer to NI Product Compatibility for Microsoft Windows 10.

• 上篇：NI MeasurementLink 2023 Q3 Win11 64bitEng 测量连接23.5.0
• 下篇：LabVIEW Modulation Toolkit 2023 Q3 Win11 32/64bitEng LabVIEW调制工具包23.5
• 标签：NI毫米波空口验证测试软件23.0NI mmWave OTA Validation Test Software 23.05G mmWave空口OTA天线方向图3D和极坐标图加速5G封装天线波束成形器件的特性分析和验证测试