石鑫华视觉
LabVIEW 2018 Remote Development Target Support Win32Eng NI LabVIEW远程开发硬件支持RDTS2018LVRDEV
LabVIEW Remote Development Target Support可帮助您在远程NI硬件上开发、运行、调试和部署LabVIEW VI。
LabVIEW Remote Development Target Support是一个驱动软件，用于支持运行Windows Embedded Standard操作系统的NI硬件。您可以在主机上使用LabVIEW开发、运行和调试Windows Embedded Standard硬件上的VI。您可以使用主机内置的安装程序将VI部署到Windows Embedded Standard硬件上。
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html
发布日期：2018/05/10
包含的版本：2018
受支持的操作系统
Windows Embedded Standard 7 SP1 operating system
语言：英语
应用程序位数：32位
校验和：
文件大小: 579870600 字节 (553.01 MB)
修改日期: 2022-03-25 05:59
MD5: d2cb37bad1a33a07978a1ad9a87f0c08
SHA1: 654af1110e4ac8ad53e0593055579899d8198cf9
SHA256: c5ae4647e54f798978e390c106f34dab9218e2d213b4b259ed7e9273c52aaccc
CRC32: 770ae1af
百度网盘下载和NI官方下载地址：
请注册登录视觉论坛账号，购买附件查看下载地址，充值请联系在线客服
LabVIEW 2018 Remote Development Target Support Win32Eng NI LabVIEW远程开发硬件支持RDTS2018
http://labviewvision.com/thread-29813-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI LabVIEW 2018 Remote Development Target Support Readme
March 2018
This file contains important information about NI LabVIEW Remote Development Target Support, including installation instructions, configuration instructions, troubleshooting, and known issues.
Overview
System Requirements
Installation Instructions
NI Write Filter Manager
Product Security and Critical Updates
Remote Development Requirements
Enabling LabVIEW Remote Development
Troubleshooting Guide
Known Issues
Accessing the Help
Automating the Installation of NI Products
Legal Information
Overview
NI LabVIEW Remote Development Target Support enables you to develop, run, debug, and deploy LabVIEW VIs on NI hardware running the Windows Embedded Standard operating system. You develop, run, and debug the VIs on the Windows Embedded Standard target from a host computer with the LabVIEW Development System. You can deploy VIs with a built installer from the host computer to the Windows Embedded Standard target. The following NI hardware is supported:
CompactRIO devices: cRIO-9081/9082
Touch Panel devices: TPC-2230
System Requirements
LabVIEW Remote Development Target Support has system requirements for the host computer and target.
| Host Computer | Target | |
The host computer must meet the following system requirements:
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for the LabVIEW Development System. | The target must meet the following system requirements:
1 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update. | |
Note
| ||
Installation Instructions
Use the following table to determine whether the hardware device you use requires you to manually install LabVIEW Remote Development Target Support.
| Purchase Date | LabVIEW Remote Development Target Support |
| Prior to August 2014 | Download the installer and additional software from the NI website. |
| On or after August 2014 | Pre-installed with the hardware device. |
NI Write Filter Manager
The LabVIEW Remote Development Target Support installer includes an option to install the NI Write Filter Manager. The Write Filter Manager enables you to interactively configure the enhanced write filter (EWF) and file-based write filter (FBWF) settings on a computer running the Windows Embedded Standard operating system. You can use the Write Filter Manager to protect a volume and to configure write filter settings on that volume.
To install the Write Filter Manager, run the LabVIEW Remote Development Target Support installer and select NI Write Filter Manager on the installation screen.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Remote Development Requirements
After installing LabVIEW Remote Development Target Support on the target, the target must meet the following requirements before you can develop applications remotely from a host computer:
A user with administrator privileges is logged into the target.
LabVIEW Remote Development is enabled on the target.
(Touch Panel devices) A device type is selected on the target.
Enabling LabVIEW Remote Development
Complete the following steps to enable LabVIEW Remote Development on the target. You must restart and log into the target for changes to take effect.
Note By default, LabVIEW Remote Development is enabled if you manually install LabVIEW Remote Development Target Support. If the target comes pre-installed with LabVIEW Remote Development Target Support, you must complete the following steps.
Right-click the NI MAX icon on the desktop and select Run as administrator.
Select My System in the configuration tree if it is not selected.
On the Settings page, ensure that LabVIEW Project Access in the Startup Settings section contains a checkmark.
| Note Ensure that the Run-Time Engine Version matches the version and bitness of the LabVIEW Development System on the host computer. |
(CompactRIO devices) Ensure the Startup Type in the RIO Service Settings section specifies Automatic to use FPGA on the target remotely.
Click Save and restart the target. You must log into the target for changes to take effect.
The target is now enabled for remote development. Refer to the Fundamentals»Working with Projects and Targets»Concepts»Working with Windows Embedded Standard Targets topic on the Contents tab of the LabVIEW Help for more information about developing applications on Windows Embedded Standard targets.
Target Security
NI recommends that you disable LabVIEW Remote Development after deploying applications to targets that are not used for development. To disable LabVIEW Remote Development, complete the following steps.
In the Remote Development Settings section of the System Configuration page, remove the checkmark from LabVIEW Remote Development.
In the RIO Service Settings section, specify Manual or Disabled for the Startup Type.
Restart the target for changes to take effect.
For more information about security when developing and deploying applications to a target remotely, refer to the NI website.
Troubleshooting Guide
Use the following table to find solutions when using LabVIEW Remote Development Target Support and developing applications on a Windows Embedded Standard target.
| Issue | Solution |
| (Touch Panel and CompactRIO devices only) I cannot discover my target in Measurement & Automation Explorer (MAX) on the host computer. | On the host computer, MAX does not support discovering Windows Embedded Standard targets. |
| (Touch Panel devices) How do I select a device type on the target? | If your target is a touch panel computer, you must specify the device type in the Select device type dialog box. On the target, launch this dialog box by navigating to Start»All Programs»National Instruments»LabVIEW Remote Development»NI Device Type Configuration. Select the device type and restart the target for changes to take effect. |
| I cannot discover the target in the LabVIEW Development System using the Add Targets and Devices dialog box. | Ensure that the target meets the requirements necessary to discover a device for remote development:
|
| I cannot connect to the target in a LabVIEW project, although I can discover the target using the Add Targets and Devices dialog box. | Ensure that the version and bitness of the LabVIEW Run-Time Engine on the target match the version and bitness of the LabVIEW Development System on the host computer. |
| How do I verify that LabVIEW Remote Development is enabled on my target? | Launch MAX and select My System in the configuration tree. In the Remote Development Settings section of the System Configuration page, ensure that LabVIEW Remote Development contains a checkmark. |
| How do I determine the version of the LabVIEW Run-Time Engine enabled for remote development on the target? | Launch MAX and select My System in the configuration tree. In the Remote Development Settings section of the System Configuration page, refer to the Run-Time Engine Version. Ensure that the version and bitness match the version and bitness of the LabVIEW Development System on the host computer. |
| How do I verify that the LabVIEW Remote Development application is running on the target? | Launch the Windows Task Manager. In the Processes page, verify that the list of processes contains niLVRemoteDev.exe. If the list does not contain niLVRemoteDev.exe, you must restart the LabVIEW Remote Development application. |
| How do I restart the LabVIEW Remote Development application? | Restart the target or select Start»All Programs»Startup»NI LabVIEW Remote Development. |
| Windows Firewall blocked the LabVIEW Remote Development application. What should I do? | You must authorize the LabVIEW Remote Development application to allow access through the Windows Firewall. |
| Can I automatically log into the target? | You can configure automatic logon to the target. |
| Can I configure remote development settings for my target from the host computer? | From the host computer, you can configure remote development settings by completing the following steps:
|
Known Issues
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in LabVIEW Remote Development Target Support.
Accessing the Help
Refer to the Fundamentals»Working with Projects and Targets»Concepts»Working with Windows Embedded Standard Targets topic on the Contents tab of the LabVIEW Help for more information about developing applications on Windows Embedded Standard targets. The LabVIEW Help is accessible by selecting Help»LabVIEW Help from the LabVIEW Development System on the host computer.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Legal Information
Copyright
© 2013–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375323D-01