NI TestStand 2014 SP1 Semiconductor Module Win64Eng Teststand2014SP1半导体模块扩展

TestStand Semiconductor模块
TestStand Semiconductor模块扩展了TestStand环境，可帮助您开发、调试、部署和维护半导体测试系统。
TestStand Semiconductor模块通过引脚/通道匹配、分箱、分选器/探针台驱动程序、限制值导入/导出和多站点编程，扩展了TestStand环境，可帮助您开发和维护半导体系统，包括晶圆级和最终封装测试应用程序。

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://labviewvision.com/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://labviewvision.com/thread-26524-1-1.html

NI TestStand 2014 SP1 Semiconductor Module
发布日期：2016/1/31
包含的版本：2014SP1完整版
受支持的操作系统
Windows 8 64-bit
Windows Server 2012 R2 64-bit
Windows 7 64-bit
Windows Server 2008 R2 64-bit
Windows 7 (SP1) 64-bi
语言：English
应用程序位数：64位
校验和：
zip
文件大小: 278506067 字节 (265.60 MB)
修改日期: 2022-03-26 00:26
MD5: 7d5287f99c48863e968f7fe1b089965c
SHA1: d6ebd3a7cb3fd12ecab97cde1685caf32aae8214
SHA256: ba5dc4c4f2df9da6723791f5d46c039a705ce151fedd4e1a743d5807e9d8f595
CRC32: 0672dae0

exe
文件大小: 277647936 字节 (264.79 MB)
修改日期: 2022-11-28 22:16
MD5: f6c47544355825e77acabe1ccc015607（秒传）
SHA1: 48ef6e944589c31589e0f272ebbbc9055d165dab
SHA256: d3fa76dd675ede35d6a0f5e61e0fb27f4f13ac9fc10deebe635feef22c0e5486
CRC32: f0ab2648百度网盘和NI官方下载地址：
请注册登陆视觉论坛账号，购买附件查看下载地址

NI TestStand 2014 SP1 Semiconductor Module Win64Eng Teststand2014SP1半导体模块扩展

http://labviewvision.com/thread-29711-1-1.html?fromuid=9

(出处: 机器视觉论坛)

TestStand 2014 Semiconductor Module SP1 Readme

January 2016

This file contains important information about getting started with the TestStand 2014 Semiconductor Module SP1, including system requirements, installation instructions, and licensing information. Refer to the What's New in the TestStand 2014 Semiconductor Module SP1 topic in the TestStand Semiconductor Module Help for information about new features and changes introduced since TestStand 2014 Semiconductor Module. Select Help»NI TestStand Help and navigate to the Semiconductor Module book in the table of contents of the TestStand Help to launch the TestStand Semiconductor Module Help.

Getting Started

Recommended System Requirements

Installation Instructions

Licensing

Upgrading TestStand 2014 Semiconductor Module to TestStand 2014 Semiconductor Module SP1

Product Security and Critical Updates

Accessing the Help

Finding Examples

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8.x

Legal Information

Getting Started

The TestStand Semiconductor Module adds the following features and functionality to TestStand for developing semiconductor test system software:

• Multisite pin map file, code module development APIs, and Semiconductor Multi Test step type for developing a semiconductor test program that runs on multiple test system hardware configurations with a variable number of test sites at a high parallel test efficiency.

• Support for binning devices under test (DUTs) based on test results.

• Support for exporting and importing test limits with text files.

• Data types, configurable callbacks, and dialog boxes for specifying test program settings, test lot information, and test station settings.

• Plug-in architecture for handler and prober communication using Semiconductor Module handler/prober drivers.

• Result processing plug-ins for generating report and data log file for the test lot.

• Customizable operator interface for executing test programs, enabling or disabling test sites, displaying statistics, and configuring test lot information and test station settings.
  

New TestStand Users

If you are a new TestStand user, NI recommends that you complete the tasks listed in the New Users section of the Guide to Documentation topic of the TestStand Help, which is located by default at <TestStand>DocHelpTSHelp.chm. Select Help»TestStand Help to launch the TestStand Help.

New TestStand Semiconductor Module Users

To familiarize yourself with the TestStand Semiconductor Module, review the topics in the Getting Started book in the TestStand Semiconductor Module Help, which is located by default at <TestStand>DocHelpTSSemiconductor.chm. Select Help»TestStand Help and navigate to the Semiconductor Module book in the table of contents of the TestStand Help to launch the TestStand Semiconductor Module Help. The TestStand Semiconductor Module Help also contains information about all module features and functionality.

Upgrade Users

If you are upgrading from an earlier version of the TestStand Semiconductor Module, refer to the TestStand 2014 Semiconductor Module SP1 New Features and the TestStand 2014 Semiconductor Module SP1 Compatibility and Known Issues topics in the TestStand Semiconductor Module Help for compatibility information and major feature changes. Select Help»TestStand Help and navigate to the Semiconductor Module book in the table of contents of the TestStand Help to launch the TestStand Semiconductor Module Help.

Recommended System Requirements

NI recommends the following system requirements for use with the TestStand Semiconductor Module.

Note: TestStand does not support Guest user accounts on Windows. TestStand supports Administrator and Limited accounts on Windows 7.

Installation Instructions

The TestStand Semiconductor Module installation program installs files for TestStand and LabVIEW.

Notes:

• NI recommends that you exit all programs before running the TestStand Semiconductor Module installer. Applications that run in the background, such as virus scanning utilities, might cause the installer to take longer than average to complete.

• The TestStand 2014 Semiconductor Module SP1 installation will overwrite the user configuration file <TestStand Application Data> CfgNI_SemiconductorModuleOISettingsTable.cfg installed by TestStand 2014 Semiconductor Module. If you have made any modifications to the file, create a backup of the file before installing to avoid losing changes.

• Visit ni.com/info and enter the Info Code rddrau to access the latest software drivers and updates.
  

Complete the following steps to install the TestStand Semiconductor Module:

• Log on as an administrator or as a user with administrator privileges.

• Insert the TestStand Semiconductor Module installation media and follow the instructions that appear on the screen. If no instructions appear on the screen, run the AutoRun executable, autorun.exe.
  

The TestStand Semiconductor Module installs the following components:

• LabVIEW 2013 SP1 Run-Time Engine

• LabVIEW 2015 Run-Time Engine
  

Licensing

After you install TestStand Semiconductor Module, you must use the NI Activation Wizard to activate the software or initiate the evaluation period for the software. You must have the serial number and the name of the software kit to activate TestStand Semiconductor Module. You can find both of these items on the Certificate of Ownership card included in your software kit.

Refer to the TestStand Semiconductor Module Licensing Options topic in the TestStand Semiconductor Module Help for more information about licensing in TestStand Semiconductor Module. Refer to the Activating Your Software topic in the TestStand Help for more information about how to activate TestStand Semiconductor Module. Select Help»TestStand Help to launch the TestStand Help.

Upgrading TestStand 2014 Semiconductor Module to TestStand 2014 Semiconductor Module SP1

Use the following guidelines when you upgrade to TestStand 2014 Semiconductor Module SP1:

• You can install TestStand 2014 Semiconductor Module SP1 over a previous TestStand Semiconductor Module version, or install on a system without TestStand 2014 Semiconductor Module 2014.

• If you installed a previous version of TestStand Semiconductor Module in a non-default directory, you can uninstall the previous version of TestStand Semiconductor Module and install TestStand 2014 Semiconductor Module to that directory.
  

Refer to the Migrating to the Current Version of TestStand section in the TestStand 2014 SP1 Release Notes for more information about upgrading to TestStand 2014 SP1.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Accessing the Help

Refer to the Semiconductor Module book in the TestStand Help, accessible from the Help menu in the TestStand Sequence Editor, for information about TestStand 2014 Semiconductor Module SP1.

Finding Examples

The TestStand Semiconductor Module includes a variety of example programs that you can use to help you learn key concepts or to serve as a starting point for applications you create. You can open an example sequence file from the subdirectories of the <TestStand Public>ExamplesNI_SemiconductorModule directory.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

• For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.

• To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
  

How to Use NI Software with Microsoft Windows 8.x

When you install NI software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8.0) or click the down arrow on the bottom left of the screen (Windows 8.1).

For more information about NI support for Windows 8.x, visit ni.com/windows8.

Legal Information

Copyright

© 2013–2016 National Instruments. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

375326B-01

• 上篇：​NI Biomedical Standards DataPlugin for EuropeanDataFormat Win32/64Eng NI用于欧洲数据格式EDF的生物医学标准数据插件历年版本1.1~21.5
• 下篇：NI TestStand 2014 SP1 Semiconductor Module Win32Eng Teststand2014SP1半导体模块扩展
• 标签：NI TestStand Semiconductor Module 2014 SP1Teststand半导体模块扩展2014SP1TestStand2014SP1扩展TestStand环境开发和维护半导体系统