Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI RFmx TD-SCDMA 19.0 Full Win64ENG RFmx蜂窝测试TD-SCDMA19.0完整版

RFmx TD-SCDMA
RFmx TD-SCDMA为TD-SCDMA蜂窝测试应用提供信号生成和分析功能。
RFmx TD-SCDMA是一款测量专用软件，旨在扩展NI RF仪器生成和分析TD-SCDMA蜂窝信号的能力。该软件可以通过误差矢量幅度(EVM)、码域误差(CDE)、发射开/关功率(PVT)、相邻信道泄漏比(ACLR)、频谱发射屏蔽(SEM)等符合标准的物理层测量，对TD-SCDMA上行链路信号进行分析。借助RFmx，您可通过交互式软面板快速轻松地执行和调试测量，使用RFmx Waveform Creator创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。

发布日期:
2019/6/27
包含的版本:
19.0完整版
受支持的操作系统:
Windows 10 64-bit
Windows Server 2012 R2 64-bit
Windows 7 (SP1) 64-bit
Windows Server 2008 R2 (SP1) 64-bit
Windows 8.1 64-bit
语言:
英文
应用程序位数：
32/64位
校验和：
文件大小: 909893632 字节 (867.74 MB)
修改日期: 2019-07-18 18:13
MD5: 9cb7f1c967cb75630fd69122786f8299
SHA1: b3f2b79debcfcd2be7c332436a0e211214c127e8
SHA256: 4e6864ba04d0b546acfa57c858d001ba88f4776ca2861da21180202cb88a2437
CRC32: 82d8cafe

百度网盘和NI官方下载地址：
注册登陆视觉论坛用户，购买附件查看下载地址

NI RFmx TD-SCDMA 19.0 Full Win64ENG RFmx蜂窝测试TD-SCDMA19.0完整版

http://pcmv.cn/thread-28474-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

RFmx TD-SCDMA 19.0 Readme

Overview

New Features

• Support for LabVIEW 2019 (32-bit and 64-bit)

• Support for De-embedding S-Parameter External Attenuation Tables

• Addition of Reference Level Headroom property

• Addition of RFmx TD-SCDMA Soft Front Panel (SFP 64-bit) with debug support
  

• Support for NI PXIe-5820

• Support for self-calibration in the RFmx Soft Front Panel
  

• Addition of APIs to perform self-calibration and partial self-calibration

• Addition of RFmx Debug Configuration Utility to configure debug settings

• Support for LabVIEW 2018 (32-bit and 64-bit)

• Support for querying configuration attributes without calling RFmxTDSCDMA Commit API
  

• Addition of Slot Power measurement

• Addition of Subframe Synchronization Mode in the ModAcc measurement

• Addition of functions to query signal configuration names and result names

• Addition of a sequential FFT measurement method in the ACP measurement

• Support for UpPTS in ModAcc measurement

• Support for LabVIEW 2017 (32-bit and 64-bit)

• Support for frequency-dependent external attenuation tables

• Support for frequency-dependent amplitude correction on measured power spectrum data

• Support for monitoring API calls in the NI IO Trace
  

Supported Hardware

Vector Signal Analyzers

• PXIe-5663

• PXIe-5663E

• PXIe-5665

• PXIe-5668

• PXIe-5668 with PXIe-5698
  

Vector Signal Transceivers

• PXIe-5644

• PXIe-5645

• PXIe-5646

• PXIe-5840

• PXIe-5820
  

System Requirements

• Processor—1 GHz 64-bit (x64) processor

• 4 GB RAM*

• A screen resolution of 1,024 x 768

• Windows 10/8.1/7, with all available critical updates and service packs
  

Supported Operating Systems

• Windows 10/8.11/7 SP12

• Windows Server 2012 R21

• Windows Server 2008 R2 SP12
  

Application Software Support

[tr][/tr]

Other Required Software

• NI-RFSA 14.1 or later
  

Microsoft Visual Studio Support

Installation Instructions

Installed SoftwareInstalled Software

• <NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments
  

• <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

• Program Files (x86)National InstrumentsMeasurementStudioVS2010
  

• <NIDir> is an alias for the following National Instruments file folder location:

• Program Files (x86)National Instruments 
  

• <SYSDIR> is an alias for the following file folder location:
  File Locations

  Item	Installed Location
  Version Compatibility Checker	<NIDir>RFmx iRFmxCompatibility_Checker.exe
  Debug Configuration Utility	<NIDir>RFmx iRFmxDebugConfigurationUtility.exe
  DLLs	<SYSDIR>
  Header files	<NIDir>SharedExternalCompilerSupportCinclude
  Import Library files (32-bit)	<NIDir>SharedExternalCompilerSupportCinclude
  Import Library files (64-bit)
  C, .NET
  Examples	<NIDocDir>NI-RFmxTDSCDMAExamples
  LabVIEW
  Examples	<NIDir>LabVIEW <version>examplesRFmxTDSCDMA
  .NET Class Libraries
  Assemblies	<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.TdscdmaMX.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll <MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll

  Executable

  Select Start»All Programs»National Instruments»RFmx TD-SCDMA»RFmx Soft Front Panel to launch the RFmx Soft Front Panel (64-bit).

  Finding Examples

  You can access all the installed RFmx TD-SCDMA examples at Start»All Programs»National Instruments»RFmx TD-SCDMA»RFmx TD-SCDMA Examples.

  Accessing the Documentation

  Documentation for RFmx TD-SCDMA is located at Start»All Programs»National Instruments»RFmx TD-SCDMA»RFmx TD-SCDMA Documentation. The documentation set is composed of the following documents.

  Document	Format	Description
  RFmx TD-SCDMA Help	HTML/Windows Help	Information about RFmx TD-SCDMA. This help file is an HTML version of a traditional user manual that includes the following information:
  RFmx TD-SCDMA 19.0 Readme	HTML (this document)	Information about supported hardware and operating systems, new features, fixed issues, and legal notices.

  For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

  Accessing VIs

  RFmx TD-SCDMA palette VIs are available from the Functions»Measurement I/O»NI-RFmx»TD-SCDMA palette.

  Product Security and Critical Updates

  Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.

  Behavior Changes

  The following items are the behavior changes in RFmx TD-SCDMA 19.0 from RFmx TD-SCDMA 3.0:
  The following items are the behavior changes in RFmx TD-SCDMA 2.3.1 from RFmx TD-SCDMA 2.3:

  Bug Fixes

  The following items are the IDs and titles of a subset of issues fixed in RFmx TD-SCDMA. This is not an exhaustive list of issues fixed in the current version of the RFmx TD-SCDMA. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
  The following items are changes in RFmx TD-SCDMA 3.0 from RFmx TD-SCDMA 2.5

  ID	Fixed Issue
  706047	Fixed an occasional crash which might occur on closing LabVIEW 2017 IDE or LabVIEW 2017 built applications that use RFmx.
  719203	Fixed an issue where a timeout error was thrown when the digital trigger was configured when Using breakpoints in C/C++/.NET application was selected in the NI-PXIe-5840.

  The following item is the change in RFmx TD-SCDMA 2.4 from RFmx TD-SCDMA 2.3.1:

  ID	Fixed Issue
  640495	Fixed an issue where switching between measurements from an RFmx cellular personality to Demod resulted in higher EVM on 5668R.

  The following items are changes in RFmx TD-SCDMA 2.3.1 from RFmx TD-SCDMA 2.3:

  ID	Fixed Issue
  650095	Fixed an issue where the RFmxInstr Close API did not abort a measurement in progress, but instead waited for the measurement to finish before closing.
  650083	Fixed an issue with RFmxInstr Save All Configurations API to save the attribute configurations depending on the corresponding number of channels configured by user.
  648703	Fixed an issue where passing NULL as selector string in a few C functions, caused the function to crash.

  The following items are changes in RFmx TD-SCDMA 2.3 from RFmx TD-SCDMA 2.2:

  ID	Fixed Issue
  631432	Fixed an issue where incorrect values were returned on reading RF Attenuation and Mechanical Attenuation properties.
  641151	Fixed an issue with configuring the following properties:
  636356	[ModAcc] Fixed an issue for User Defined channel configuration mode, to allow any number of user defined channels.
  608056	[ModAcc] Fixed an issue so that the trace lengths during Averaging On or Off are the same.
  642156	[ModAcc] Fixed issues with the length and values of Code Domain Error Trace and Maximum Code Domain Error Trace

  Automating the Installation of NI Products

  You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
  If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
  For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

  Using NI Software with Microsoft Windows 10

  Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

  Using NI Software with Microsoft Windows 8.1

  When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

  RFmx TD-SCDMA Drops Support for Windows 7 (64-Bit) and Windows Server 2008 R2 in 2021

  RFmx TD-SCDMA will drop support for Windows 7 (64-bit) and Windows Server 2008 R2 starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
  For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

  Product	Info Code
  LabVIEW	lifecycle
  LabWindows/CVI	cvi_lifecycle
  Measurement Studio	mstudiolifecycle
  TestStand	tslcp
  DIAdem	ddlcp
  SignalExpress	selcp
  VeriStand	nivslifecycle

  ---

  Legal Information

  Copyright
  © 2015–2019 National Instruments. All rights reserved.
  Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
  NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
  End-User License Agreements and Third-Party Legal Notices
  You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
  U.S. Government Restricted Rights
  If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
  IVI Foundation Copyright Notice
  Content from the IVI specifications reproduced with permission from the IVI Foundation.
  The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  Trademarks
  Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
  Patents
  For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
  375525J-01

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

• For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.

• For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.

• To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.
  

• UL Scrambling Code property and Midamble properties in ModAcc, CDA, and PVT measurements with a named signal.

• User Defined Channel properties in ModAcc and CDA measurements with a named signal.
  

• The alias 'default@TDSCDMA' for the default signal name is accepted as a valid signal name in a selector string parameter

• LabVIEW built binaries using RFmx versions older than 2.2 are no longer supported
  

• Dropped support for RFmx TD-SCDMA Measurement Interactive Panel

• Dropped support for LabVIEW 2015

• Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr
  

• An introduction to RFmx TD-SCDMA

• How to get started with application development

• A complete reference for all RFmx TD-SCDMA programming functions and VIs
  

• 32-bit: <NIDir>SharedExternalCompilerSupportClib32msvc

• 64-bit: <NIDir>SharedExternalCompilerSupportClib64msvc
  

• WindowsSysWOW64 for 32-bit programs and windowssystem32 for 64-bit programs
  

• 
  

• 上篇：NI RFmx TD-SCDMA 3.0 Runtime Win64ENG RFmx蜂窝测试TD-SCDMA3.0运行版-64位
• 下篇：NI RFmx TD-SCDMA 19.0 Runtime Win64ENG RFmx蜂窝测试TD-SCDMA19.0运行版-32位
• 标签：NI RFmx TD-SCDMA 19.0TD-SCDMA19.0RFmx蜂窝测试TD-SCDMA蜂窝测试NI RF仪器误差矢量幅度EVM码域误差CDE发射开-关功率PVT相邻信道泄漏比ACLR频谱发射屏蔽SEMRFmx Waveform Creator