石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI-Industrial Controller Device Drivers 18.0 Win32Eng NI工业控制器设备驱动程序18.0
NI-Industrial Controller Device Drivers
NI工业控制器设备驱动程序软件为客户使用NI工业控制器提供支持。
NI工业控制器设备驱动程序是用于配置和编程工业控制器的驱动程序软件。该软件还可用于控制工业控制器的数字I/O。除了LabVIEW、LabVIEW Real-Time模块或NI自动化检测视觉生成器之外，您还必须安装此驱动程序才能开始编程工业控制器。
Win32Eng
18.0
文件大小: 2474622359 字节 (2.30 GB)
修改日期: 2018-05-17 01:08
MD5: 19aeb97cf32860de39f3fd3f59f16e32（官方正确）
SHA1: ff777cbf00892b5148a843beea37ab009e028671
SHA256: 2f3d2b198499cc8f2a5298aed94f42c585ea1f2a675737b08f4e51101fbc0ed5
CRC32: 68f327e7
百度网盘与NI官方下载地址：
NI-Industrial Controller Device Drivers 18.0 Win32Eng NI工业控制器设备驱动程序18.0
http://pcmv.cn/thread-26394-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI Industrial Controller Device Drivers 18.0 Readme
May 2018
This file contains important information about National Instruments Industrial Controller Device Drivers, including installation instructions, new features, fixed issues, and known issues.
Overview
System Requirements
Product Security and Critical Updates
NI Application and Driver Software Support
New Features
Updates and Improvements
Known Issues
Installation Instructions
Automating the Installation of NI Products
Documentation
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Overview
NI Industrial Controller Device Drivers allows you to configure Industrial Controller devices and control their digital I/O. This release supports the following hardware:
IC-3120
IC-3121
IC-3171
IC-3172
IC-3173
Refer to the NI Industrial Controller website at ni.com/industrial-controller for the latest information about NI Industrial Controller Device Drivers.
System Requirements
The development computer must meet the following requirements to run NI Industrial Controller Device Drivers:
| Processor | Pentium 4 1 GHz or equivalent | |
| Memory | 512 MB RAM | |
| Display | 1,024 × 768 resolution video adapter with a 16-bit display | |
| Minimum Recommended Free Hard Disk Space | 1.5 GB | |
| Operating System |
| |
Note NI Industrial Controller Device Drivers 16.0 dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Industrial Controller Device Drivers 16.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Industrial Controller Device Drivers 16.0 or later to an unsupported OS. Additionally, after installing NI Industrial Controller Device Drivers 16.0 or later, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
3Only supported as pre-installed on NI hardware.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
NI Application and Driver Software Support
The following table lists the NI application and driver software versions, including service packs, supported by the NI Industrial Controller Device Drivers. The installer specifically allows side-by-side installations of NI Industrial Controller Device Drivers for each of the supported versions of LabVIEW, enabling you to use the NI Industrial Controller Device Drivers with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, and any other supported development environment before installing NI Industrial Controller Device Drivers.
| NI Application Software or Driver Software | Versions Supported by NI Industrial Controller Device Drivers |
| NI LabVIEW | 2015, 2016, 2017, 2018 |
| NI LabVIEW Real-Time Module | 2015, 2016, 2017, 2018 |
| NI LabVIEW FPGA Module | 2015, 2016, 2017, 2018 |
| NI Vision Development Module | 2015 SP1 or later |
| NI Vision Acquisition Software | February 2016 or later |
| NI Vision Builder for Automated Inspection | IC-3120, 3121, and 3173—2015 or later |
New Features
The following list describes the new features in NI Industrial Controller Device Drivers 18.0
Added support for LabVIEW 2018
Updates and Improvements
Refer to the National Instruments Website for an up-to-date list of all bug fixes in this release.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI Industrial Controller Device Drivers.
The following list contains potential high severity issues that you may want to review before using this product. Refer to the previous link to determine if any known issues have been resolved in a subsequent update.
Installing or reinstalling certain drivers, including Vision RIO support, on top of previous installations on a Linux Real-Time target can put the target in an unreachable state unless you force it into safe mode using the reset button or manually reassociate driver dependencies on the target. To avoid this issue, format the target prior to installing or reinstalling software, or only perform reinstallations using a Recommended Software Set. To learn more about this issue and additional recovery options, visit ni.com/info and enter the Info Code nikalEmbeddedReinstall.
Installation Instructions
Complete the following steps to install NI Industrial Controller Device Drivers:
Note: You must have administrator access to install NI Industrial Controller Device Drivers.
Insert the NI Industrial Controller Device Drivers installation media.
If you do not have autorun enabled, double-click autorun.exe. If you have autorun enabled, autorun.exe runs automatically.
Follow the onscreen instructions.
NI Industrial Controllers Device Drivers integrate with NI Measurement & Automation Explorer (MAX), the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Industrial Controller Device Drivers.
Installing from an NI Software Suite or NI Product Bundle
If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Configuring NI Industrial Controller Device Drivers for the LabVIEW Real-Time Module
If you are using a Windows development machine, the LabVIEW Real-Time Module, and an RT industrial controller, complete the following steps to install and configure NI Industrial Controller Device Drivers.
Install NI Industrial Controller Device Drivers software on your Windows development machine.
Ensure that your RT target is connected to the same subnet as the Windows development machine.
Run NI MAX.
Double-click the NI MAX icon on your desktop.
Expand the Remote Systems list in the configuration tree.
Select your RT target in the list.
Configure your network settings. Refer to the Remote Systems Help in NI MAX (Help»Help Topics»Remote Systems) for instructions about configuring network settings.
Install NI Industrial Controller support on the Real-Time target, using one of the following options:
Click the Software item below the RT target in the configuration tree.
Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.
If you are given a choice of Recommended Software Sets, choose custom software installation and click Next to proceed with a custom installation.
Select Industrial Controller Support, as well as any additional software you would like to install on the target machine.
Click Next. Review the list of software you selected to install.
Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
Click Finish.
Click the Software item below the RT target in the configuration tree.
Click Add/Remove Software on the NI MAX toolbar to launch the LabVIEW Real-Time Software Wizard.
Select NI Industrial Controller under the version of the LabVIEW Real-Time Module you are using.
Click Next.
Select any additional add-ons you would like to install to the target machine.
Click Next. Review the list of software you selected to install.
Click Next to begin downloading the software to the target machine. When NI MAX has finished downloading the software, it restarts the remote device.
Click Finish.
Recommended Software Set
Custom installation
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Documentation
Documentation is installed onto your hard drive with NI Industrial Controller Device Drivers. To view the documentation, select Start»All Programs»National Instruments»Industrial Controller, or navigate to <Users>PublicPublic DocumentsNational Instruments.
Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation.
Refer to the National Instruments Web site for information about the IEEE 1588 time synchronization capabilities of the Industrial Controllers.
IC-3120 Getting Started Guide, IC-3120 Specifications, and IC-3120 User Manual—These documents explain how to install and configure the IC-3120, and contain specifications and electrical and mechanical information.
IC-3121 Getting Started Guide, IC-3121 Specifications, and IC-3121 User Manual—These documents explain how to install and configure the IC-3121, and contain specifications and electrical and mechanical information.
IC-317x Getting Started Guide, IC-3171 Specifications, IC-3172 Specifications, IC-3173 Specifications, and IC-317x User Manual—These documents explain how to install and configure the IC-317x, and contain specifications and electrical and mechanical information.
Vision RIO VI Reference Help—This document contains reference information about NI Vision RIO VIs. Vision RIO VIs provide basic tools to configure input and output on FPGA-enabled devices to synchronize image acquisition with process control.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375780E-01