Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Calibration Executive 6.2.0 Win64Eng NI校准执行程序6.2.0下载

校准执行程序
Calibration Executive用于校准和调整NI测量设备上的I/O通道。
Calibration Executive是一个用于计量应用的软件工具。Calibration Executive提供了直观的用户界面，提供自动或手动两种模式。此外，该工具还提供了报告功能，用于记录校准和调整结果，同时还可存储和检索数据。借助软件的模块化环境，您可以在可用时添加新的校准程序，并将报告存储在符合ODBC的数据库中，以便从其他程序访问。

该应用程序6.0之前的版本找不到完整版资源，无法提供。

Calibration Executive 6.2.0
发布日期：2021/4/26
包含的版本：6.2.0完整版
受支持的操作系统：
Windows 7 (SP1) 64-bit
Windows 8.1 64-bit
Windows 10 64-bit
Windows Embedded Standard 7 (SP1)
Windows Server 2008 R2 (SP1) 64-bit
Windows Server 2012 R2 64-bit
Windows Server 2016 64-bit
语言：English
应用程序位数：64位
校验和：
文件大小: 12050118656 字节 (11.22 GB)
修改日期: 2021-04-24 06:51
MD5: 6658c07c88585054595b68a102a814c6
SHA1: bd4ceca24c0b0a0837a0da8ff94697a23da60a4d
SHA256: de625ab9e47908f72c2147e5df98741e1274e32368763d6577b7fc1d81715f2f
CRC32: 9236da9d

百度网盘和NI官方下载：
请注册登录视觉论坛用户，购买附件查看下载地址

NI Calibration Executive 6.2.0 Win64Eng NI校准执行程序6.2.0下载

http://pcmv.cn/thread-29236-1-1.html?fromuid=9

(出处: 机器视觉论坛)

Calibration Executive 6.2 Readme

April 2021

This file contains installation instructions and compatibility information for Calibration Executive.

You can find more release information on ni.com.

• Calibration Executive Release Notes: Known issues, bugs fixed since the last release, and other notes about this release

• Calibration Executive Manuals: New features, behavior changes, and other documentation
  

Overview

System Requirements

Supported Operating Systems

Installation Instructions

Upgrade Considerations

Product Security and Critical Updates

Driver Information

New Features, Procedures, and Behavior Changes

Calibration Executive 6.2

Calibration Executive 6.1

Calibration Executive 6.0.1

Calibration Executive 6.0

Accessing the Help

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Unsupported Windows Operating Systems

Legal Information

Overview

Calibration Executive 6.2 is a minor release that adds or enhances features and functionality to Calibration Executive 6.0.

Calibration Executive 3.6 and later does not support legacy procedures that require the NI Traditional DAQ driver. Calibration support for these devices is available using Calibration Executive for Traditional DAQ Version 3.5.2.

System Requirements

Calibration Executive has the following requirements:

• 1 GHz, 64-bit (x64) processor

• 8 GB of RAM (procedures with a large number of test points might require more memory)

• 1024 x 768 pixels screen resolution

• The user must have administrator privileges
  

Supported Operating Systems

Calibration Executive 6.2 supports the following operating systems:

• Windows 10

• Windows 8.11

• Windows 7 SP12
  

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 requires Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1 requires Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 and KB3125574 for more information about how to install these updates.

Calibration Executive Drops Support for Windows 7 and 8.1 Operating Systems in 2021

Calibration Executive will drop support for Windows 7 and Windows 8.1 operating systems starting in 2021. Versions of this product released after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.

Note  Calibration Executive will not install or run on an unsupported OS. Additionally, after installing this version of Calibration Executive, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.

For more information about the changes to our OS support, visit http://www.ni.com/r/win32bitsupport.

Note  Refer to Unsupported Windows Operating Systems for more information about support for Microsoft Windows OSes.

Installation Instructions

Download the Calibration Executive installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Notes

• If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

• Use the serial number that is included with your software to activate Calibration Executive. For more information on Calibration Executive activation, refer to NI Software Activation.

• Calibration Executive requires Java SE 8 Update 51 or greater, which is available from www.oracle.com.
  

Upgrade Considerations

Calibration Executive versions 6.0 and later have a new installation path, and the program no longer launches as an administrator application. These changes can render some application database paths invalid after the upgrade. After an upgrade, you might need to manually move some files.

Upgrading Calibration Executive 5.x to 6.0 and later

If your Report and Uncertainty databases are in their default locations, the setup program will automatically move the databases to the new default location and no action is required.

If databases were moved from their default locations in Calibration Executive 5.x, then Calibration Executive 6.x attempts to reference the current location. If Calibration Executive cannot write to the files in this location, a warning message will be displayed when you first launch Calibration Executive. In this case, you will need to move the files manually to a writeable location. After you move the database files, follow the instructions in Selecting Database Locations to configure the paths for Calibration Executive 6.0 and later.

Upgrading Calibration Executive 4.x to 6.0 and later

The setup program for Calibration Executive 6.x does not automatically move your Report and Uncertainty databases, even if they are in their default locations. Instead, you will need to move the databases manually to a writeable location. After you move the database files, follow the instructions in Selecting Database Locations to configure the paths for Calibration Executive 6.0 and later.

Selecting Database Locations

To select the location of your Report database:

• In the menu bar, select Configure»Database options.

• Click the folder icon in the Calibration Executive Configure Report Database dialog, and browse to find the database file.

• Select the file and click OK.

• Click OK to close the dialog box.
  

To select the location of your Uncertainty database:

• In the menu bar, select Configure»Calibration Reports.

• In the Calibration Reports window, click Manage Uncertainty. The Uncertainty Export/Import window opens.

• Select Database Options»Select Database Location

• Use controls in the Select Uncertainty Database File explorer window to locate your uncertainty database file.

• Select the file, and click OK.

• In the Uncertainty Export/Import window, click Done.

• Click Close to close the Calibration Reports window.
  

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

Driver Information

The following driver is required for specific product support in Calibration Executive. Download NI drivers from ni.com/downloads/ and install them manually.

• VirtualBench Software 19.0 (required for all supported VirtualBench products).
  

Note  VirtualBench 19.0 and later will not install or run on an unsupported OS. VirtualBench supports Windows 10, but has dropped support for Microsoft Windows 7 and Windows 8.1.

The following instruments require specific drivers that are not installed by Calibration Executive. To install these drivers, you must download them directly from the manufacturer's website; you can find links to third party instrument drivers at ni.com/idnet.

Driver versions listed are those tested during development; later versions might be available and should be compatible.

Note  This release does not include an NI-VNA driver. To run the PXI-5691 and PXIe-5632 procedures, download NI-VNA 18.0 and install the driver manually after you install Calibration Executive.

New FeaturesCalibration Executive 6.2New Product Support

Behavior Changes

The Calibration Executive 6.2 release changes the following:

Calibration Executive 6.1New Product Support

Behavior Changes

The Calibration Executive 6.1 release changes the following:

Calibration Executive 6.0.1Behavior Changes

The Calibration Executive 6.0.1 patch release changes the following:

• A critical bug in the Verify ALC Limits Table test is fixed, enabling the following devices to be verified and adjusted:
  

• PXI-5650

• PXIe-5650

• PXI-5651

• PXIe-5651

• PXI-5652

• PXIe-5652

• PXIe-5663

• PXIe-5663E

• PXIe-5673

• PXIe-5673E
  

Calibration Executive 6.0New Features

The Calibration Executive 6.0 release adds the following features:

• Uncertainty and guard band options in custom report configurations
  

New Product Support

Behavior Changes

The Calibration Executive 6.0 release changes the following:

• Added adjustment support for NI 9203.

• Modified audio notifications can only be enabled or disabled; there are no additional options to be configured.

• Removed support for 32-bit OS calibration procedures.
  

Accessing the Help

Refer to Calibration Executive Help, accessible from Help»Calibration Executive Help, for information about Calibration Executive.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.

For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Unsupported Windows Operating Systems

Calibration Executive no longer supports any 32-bit Windows operating system. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit http://www.ni.com/r/win32bitsupport.

Legal Information

Copyright

© 2005–2021 National Instruments Corporation. All rights reserved.

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

• Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

• EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

• Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

375683AC-01

• 上篇：NI Calibration Executive 6.1.0 Win64Eng NI校准执行程序6.1.0下载
• 下篇：NI Calibration Executive 6.3.0 x64Win10 64bitEng NI校准执行程序6.3.0下载
• 标签：NI Calibration Executive 6.2.0NI校准执行程序6.2.0下载校准和调整NI测量设备上的IO通道Calibration Executive