石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI RFmx CDMA2000 2.2 Win32/64ENG完整版下载

文章来源:石鑫华视觉网时间:2022-03-28 18:05:12 点击:289

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI RFmx CDMA2000 2.2 Win32/64ENG完整版下载

RFmx CDMA2000
RFmx CDMA2000为cdmaOne和CDMA2000 1xRTT蜂窝测试应用提供信号生成和分析功能。
RFmx CDMA2000是一款测量专用软件，旨在扩展NI RF仪器生成和分析CDMA2000蜂窝信号的能力。该软件可以通过误差矢量幅度(EVM)、码域误差(CDE)、相邻信道泄漏比(ACLR)、频谱发射屏蔽(SEM)等符合标准的物理层测量，对cdmaOne (IS-95)和CDMA2000 1xRTT (IS-2000)反向链路信号进行分析。借助RFmx，您可通过交互式软面板快速轻松地执行和调试测量，使用RFmx Waveform Creator创建和回放开放的未锁定波形，并结合更高性能的API加快自动化测试的速度。

发布日期：
2016/12/8
包含的版本：
2.2完整版
受支持的操作系统：
Windows 10
Windows Server 2008 R2 64-bit
Windows 8.1
Windows 7
应用程序位数：
32/64位
语言：
英文
校验和：
文件大小: 588390360 字节 (561.13 MB)
修改日期: 2016-12-08 23:50
MD5: 635dd8009f9d39b081b0bec617588396
SHA1: 4dd6d24149bd50b8badadd1e96949dffceb3897b
SHA256: 9e53dc90d1044fb5e204977c8975bc21704bb2bf437a6365fb81cd24ce3fec5f
CRC32: 798ec865

百度网盘与NI官方下载地址：
注册登陆视觉论坛，购买附件查看下载地址

NI RFmx CDMA2000 2.2 Win32/64ENG完整版下载

http://pcmv.cn/thread-28309-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-RFmx CDMA2k 2.2 Readme

December 2016


Thank you for using NI-RFmx CDMA2k. This file contains important information about NI-RFmx CDMA2k and is organized into the following sections:


New Features

NI-RFmx CDMA2k 2.2 includes the following new features:


  • Addition of QPSK EVM (QEVM) measurements

  • Support for LabVIEW 2016 (32-bit and 64-bit)

  • Addition of I/Q gain imbalance and I/Q quadrature error measurement results for ModAcc measurements

  • Improved robustness of channel auto detection in ModAcc measurements

  • Support for reading measurement configuration internally used by RFmx for spectral measurements

  • Support for Limited Configuration Change when sweeping frequency and reference level in test applications

  • Support for LO leakage avoidance when using vector signal transciever as the analyzer

NI-RFmx CDMA2k 2.1 f4 includes the following bug fixes and updates:


  • Fixed an issue where NI-RFmx was crashing when the memory usage in a process increased beyond 2 GB.

  • Recommended IQ Pre Trigger Time property now returns a positive number instead of a negative number. This property is applicable when NI-RFmx is used in the Analysis-Only mode.

  • For the Analysis-Only mode, user needs to adjust the t0 value of the I/Q waveforms according to pre-trigger samples present in the waveform before passing the waveform to the Analyze (IQ) function.

NI-RFmx CDMA2k 2.1 includes the following new features:


  • Support for C and .NET

  • Support for Hardware Agnostic Mode, where you can perform measurements on a user-specified I/Q or spectrum waveform

Installation Instructions

Caution  Before you install NI-RFmx CDMA2k 2.2, ensure that you have uninstalled all related NI-RFmx 1.0 products.


Caution   If you are using only RFmx LabVIEW Runtime products, NI recommends uninstalling all the RFmx Runtime products before installing a newer version of RFmx Runtime products.


NI-RFmx drivers require that all the installed drivers have the same version for proper functionality because the NI-RFmx drivers use shared components that need to use the same version across all drivers. If driver incompatibilities exist, they are reported through a dialog box after installation. You can also use the Version Compatibility Checker utility to manually check for version incompatibilities. Refer to the Installed Software, Documentation, and Examples section for more information about the installed location of the Version Compatibility Checker utility.


Supported HardwareVector Signal Analyzers

  • NI PXIe-5663

  • NI PXIe-5663E

  • NI PXIe-5665

  • NI PXIe-5668R

  • NI PXIe-5698 with NI PXIe-5668R

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.


Vector Signal Transceivers

  • NI PXIe-5644R

  • NI PXIe-5645R

  • NI PXIe-5646R

  • NI PXIe-5840

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.


System RequirementsSupported Operating Systems

NI-RFmx CDMA2k 2.2 supports the following operating systems:


  • Windows 10/8.11/7 SP12 (32-bit and 64-bit)

  • Windows Server 2008 R2 SP12 (64-bit)

1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.


2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.


Note  NI-RFmx CDMA2k 2.2 and later does not support Windows Server non-R2 editions.


NI recommends that you have the most recent service pack for your operating system installed.


Minimum Requirements

  • Processor—Intel i3 or equivalent

  • RAM—2 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1300 x 700 with 256 colors

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.


**Microsoft .NET Framework 4.0 is required for .NET support only.


Recommended System

  • Processor—Intel i5 or equivalent

  • RAM—4 GB*

  • Microsoft Internet Explorer 5.5 or later

  • A screen resolution of 1300 x 700

  • Windows 10/8.1/7, with all available critical updates and service packs

  • Microsoft .NET Framework 4.0**

*Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.


**Microsoft .NET Framework 4.0 is required for .NET support only.


Application Development Environments (ADEs)

Note  You should install ADEs, such as NI LabVIEW or Microsoft Visual Studio®, before installing NI-RFmx CDMA2k. To add support for ADEs installed after installing NI-RFmx CDMA2k, modify your NI-RFmx CDMA2k installation or launch the NI-RFmx CDMA2k installer again.


  • NI LabVIEW 2013 SP1 f6 patch, 2014 SP1 f5 (32-bit) patch, 2014 SP1 f6 (64-bit) patch, 2015 SP1 f5 patch, or 2016

  • Microsoft Visual Studio 2010 SP1 or later

Note  NI-RFmx CDMA2k will not operate correctly without the service packs and patches previously mentioned.


Other Required Software

  • NI-RFSA 14.1 or later

Installed Software, Documentation, and ExamplesInstalled Software

  • <NIDocDir> is an alias for the following National Instruments file folder location: UsersPublicPublic DocumentsNational Instruments

  • <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

    • (32-bit) Program FilesNational InstrumentsMeasurementStudioVS2010

    • (64-bit) Program Files (x86)National InstrumentsMeasurementStudioVS2010

  • <NIDir> is an alias for the following National Instruments file folder location:

    • (32-bit) Program FilesNational Instruments

    • (64-bit) Program Files (x86)National Instruments for 32-bit programs and Program FilesNational Instruments for 64-bit programs

  • <SYSDIR> is an alias for the following National Instruments file folder location:

    • (32-bit) windowssystem32

    • (64-bit) windowsSysWow64 for 32-bit programs and windowssystem32 for 64-bit programs

File Locations

Item
Installed Location
Version Compatibility Checker<NIDir>RFmx iRFmxCompatibility_Checker.exe
DLLs<SYSDIR>
Header files
<NIDir>SharedExternalCompilerSupportCinclude

Import Library files (32-bit)
<NIDir>SharedExternalCompilerSupportCinclude

Import Library files (64-bit)

  • 32-bit: <NIDir>SharedExternalCompilerSupportClib32msvc

  • 64-bit: <NIDir>SharedExternalCompilerSupportClib64msvc

C, .NET
Examples<NIDocDir>RFmxCDMA2kExamples
LabVIEW
Examples<NIDir>LabVIEW <version>examplesRFmxCDMA2k
.NET Class Libraries
Assemblies<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.Cdma2kMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll

Executable

Select Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Measurement Interactive Panel to launch the NI-RFmx CDMA2k Measurement Interactive Panel.


Documentation

Documentation for NI-RFmx CDMA2k is located at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Documentation. The documentation set is composed of the following documents.


Document
Format
Description
NI-RFmx CDMA2k HelpHTML/Windows HelpContains primary help content for NI-RFmx CDMA2k. This help file is an HTML version of a traditional user manual that includes the following information:

  • An introduction to NI-RFmx CDMA2k

  • How to get started with application development

  • A complete reference for all NI-RFmx CDMA2k programming functions and VIs

NI-RFmx CDMA2k 2.2 ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.


To use the .NET API, you must install the the .NET class libraries or the .NET Wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to the National Instruments .NET Driver Support document at ni.com/info and enter Info Code NETAPIdriversupport.


Accessing VIs and Functions

NI-RFmx CDMA2k palette VIs are available from the Functions»Measurement I/O»NI-RFmx»CDMA2k palette.


Finding Examples

You can access all the installed NI-RFmx CDMA2k examples at Start»All Programs»National Instruments»NI-RFmx CDMA2k»NI-RFmx CDMA2k Examples.


NI-RFmx CDMA2k 2.2 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003

With this release, NI-RFmx CDMA2k drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI-RFmx CDMA2k 2.2 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI-RFmx CDMA2k 2.2 to an unsupported OS. Additionally, after installing NI-RFmx CDMA2k 2.2, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.


For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.


Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.


Uninstalling/Modifying NI-RFmx CDMA2k

For Windows 7, complete the following steps:


  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-RFmx CDMA2k 2.2 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows 10/8.1, complete the following steps:


  • Right-click on the Start button.

  • Select Control Panel.

  • Select Programs»Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall button.

  • Select NI-RFmx CDMA2k 2.2 from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

As part of the NI-RFmx CDMA2k 2.2 installation, the following software is installed. To completely remove the NI-RFmx CDMA2k 2.2 installation from your system, you must also remove the following package:


  • NI-RFmx CDMA2k Runtime 2.2

  • NI-RFmx CDMA2k Runtime 2.2 (64-bit)

Caution  Several of the software packages listed above are shared with other NI software packages. If you attempt to remove a piece of software that something else is dependent on, a message launches to warn you about the software dependencies. You can choose to either uninstall all of the software or to leave the shared software installed. If you choose to uninstall the shared software, some of your other NI software may no longer function correctly.


Note  Do not attempt to uninstall by manually deleting files.


Behavior Changes

The following item is a behavior change in NI-RFmx CDMA2k 2.2 from NI-RFmx CDMA2k 2.1


  • RC1/2 analysis for ModAcc measurements is now standard compliant. The RC1/2 analysis employs a band limiting filter instead of the ICI removal filter (in contrast to all other RC's), therefore for RC1/2 the chip constellation trace shows the ICI introduced by the transmit filter.

Known Issues

You can access the software and documentation known issues list online. Refer to the NI-RFmx CDMA2k 2.2 Known Issues at ni.com for an up-to-date list of known issues in NI-RFmx CDMA2k 2.2.


Bug Fixes

The following items are changes in NI-RFmx CDMA2k 2.2 from NI-RFmx CDMA2k 2.1.


ID
Fixed Issue
529110/537284Fixed an issue with instability of the RC1/2 measurement.
The following items are changes in NI-RFmx CDMA2k 2.1 from NI-RFmx CDMA2k 2.0.


ID
Fixed Issue
554076Fixed an issue with the starting reference level used in auto level when preamp is enabled on NI PXIe-5668R.
562712
Fixed an issue with fetching the ModAcc results from the property node when traces are disabled.

Increasing Available Memory For Your Application

When developing memory intensive applications, you may encounter memory limits as 32-bit Windows applications only utilize 2 GB of memory by default. To expand the amount of memory an application can utilize, you can configure the executable to be large address aware to gain access to up to 3 GB of memory on a 32-bit Windows operating system and up to 4 GB of memory on a 64-bit Windows operating system.
For more information, refer to Memory Limits for Windows and Windows Server Releases on the Microsoft website.


Note  LabVIEW 8.5 and later are large address aware. For more information, refer to How Much Memory can LabVIEW 32-bit or 64-bit Use?.
In TestStand 2013 and later, the Large Address Aware flag is enabled by default for the TestStand Sequence Editor and TestStand User Interfaces. For more information, refer to Using the Large Address Aware Flag With TestStand Applications.


Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.


If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.


For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:


Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8.1. For more information about NI support for Windows 10, visit ni.com/windows10.


Using NI Software with Microsoft Windows 8.1

When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.


Legal Information

Copyright


© 2015–2016 National Instruments. All rights reserved.


Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.


National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.


End-User License Agreements and Third-Party Legal Notices


You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:


  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights


If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.


IVI Foundation Copyright Notice


Content from the IVI specifications reproduced with permission from the IVI Foundation.


The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.


Trademarks


Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.


Patents


For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


375524C-01



首页
84162741QQ
联系