石鑫华视觉 手机微信QQ:13450001061

下载中心

NI-RFMX demod 21.5 Full Win32/64Eng NI-RFmx模拟调制/数字调制21.5完整版

文章来源:本站时间:2022-03-14 11:11:50 点击:719

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-RFMX demod 21.5 Full Win32/64Eng NI-RFmx模拟调制/数字调制21.5完整版
RFmx模拟调制
RFmx模拟调制为测试应用提供模拟调制信号的生成和分析。
RFmx Analog Modulation是运行在RFmx解调器内的应用软件，它与RFmx Analog Modulation一起安装。该软件可扩展NI RF仪器对于模拟调制信号生成和分析的能力。您可以使用该软件，通过对频率/相位偏移、模拟调制深度、频率/相位偏差等的测量，分析AM、FM、PM和FM的立体声信号。此外，您可以通过应用去加重和音频滤波器来分析解调后的信号波形、频谱和失真。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。
RFmx数字调制
RFmx数字変調提供测试应用数字変調信号生成和分析。
RFmx Digital Modulation是RFmx Demod内运行的应用软件，该软件与RFmx Digital Modulation一起安装。该软件可扩展NI RF仪器对于数字调制信号的生成和分析能力。您可以使用这个软件，通过对误差矢量幅度(EVM)、调制误差率(MER)、rho、振幅下降等的测量，分析ASK、FSK、PSK和QAM信号。此外，您可以分析同步化和应用化的灵活均衡、脉冲形状过滤、测量过滤和损伤补偿的解调比特。您可以通过交互式软件前面板进行和调试测量，利用随附的RFmx Waveform Creator创建和回放开放的、未锁定的波形，并利用性能优化的API加快自动测试。

21.5 x86/x64
文件大小: 786708480 字节 (750.26 MB)
修改日期: 2022-01-27 14:16
MD5: ca1d0b59adc69d8cb5a472704c84617f
SHA1: 4831cb5d5087f9c84d43a7b25f3064cd023bf59e
SHA256: f490941f7924a7d1fa4d9d5cdc94db778dab9c3fa884005ed6328880a49c3688
CRC32: bcf89af4

NI官方下载和百度网盘下载地址：

NI-RFMX demod 21.5 Full Win32/64Eng NI-RFmx模拟调制/数字调制21.5完整版

http://pcmv.cn/thread-28237-1-1.html?fromuid=9

(出处: 机器视觉论坛PCMV.CN)



RFmx Demod 21.5 Readme

January 2022
This file contains important information about the RFmx Demod, including system requirements, and installation instructions.
You can find more release information on ni.com.

[url=]Overview[/url]

RFmx Demod provides a highly optimized RF measurement experience. Use RFmx Demod to perform demodulation measurements on analog and digital modulation signal formats, including QAM and ASK.

[url=]New Features[/url]

RFmx Demod 21.3 includes the following new features:

  • Support for LabVIEW 2021 (32-bit and 64-bit)

RFmx Demod 20.6 includes the following new features:

  • Support for PXIe-5832

RFmx Demod 20.0 includes the following new features:

  • Support for LabVIEW 2020 (32-bit and 64-bit)

  • Support for Start trigger, Advance trigger, and Events in RFInstr

  • Support to configure RFInstr properties in the context of a signal configuration

  • Support for PXIe-5841 with PXIe-5655

[url=]Supported Hardware[/url]

The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.

Vector Signal Analyzers

  • PXIe-5663

  • PXIe-5663E

  • PXIe-5665

  • PXIe-5668

  • PXIe-5668 with PXIe-5698

Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.

Vector Signal Transceivers

  • PXIe-5644

  • PXIe-5645

  • PXIe-5646

  • PXIe-5820

  • PXIe-5830

  • PXIe-5831

  • PXIe-5832

  • PXIe-5841

  • PXIe-5840

  • PXIe-5841 with PXIe-5655

Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.

[url=]System Requirements[/url]

RFmx Demod has the following requirements:

  • Processor—1 GHz 64-bit (x64) processor

  • 4 GB RAM *

  • A screen resolution of 1,024 x 768

  • Windows 10, with all available critical updates and service packs

* Depending on the amount of data acquired and/or processed, a larger amount of memory may be required.

[url=]Supported Operating Systems[/url]

RFmx Demod 21.5 supports the following 64-bit operating systems:

  • Windows 10

  • Windows Server 2019

  • Windows Server 2016

Note    RFmx Demod no longer supports Windows Vista/XP/7/8.1, Windows Server 2003/2008/2012, or any 32-bit Windows operating system. RFmx Demod 21.5 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use RFmx Demod 21.5 to an unsupported OS. Additionally, after installing RFmx Demod 21.5, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For detailed information about NI operating system support, visit https://www.ni.com/r/win32bitsupport.

[url=]Application Software Support[/url]

RFmx Demod supports the following application software versions, including service packs. You should install application software, such as LabVIEW, LabWindows/CVI or Microsoft Visual Studio®, before installing RFmx Demod. To add support for application software installed after installing RFmx Demod modify your RFmx Demod installation or launch the RFmx Demod installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Application Software
Versions Supported by RFmx Demod
LabVIEW2018 SP1 f4 patch, 2019 SP1 f3 patch, 2020 SP1, or 2021
LabWindows™/CVI™2017 or later

Required Software

  • NI-RFSA 14.1 or later

  • NI-RFSG 14.0.1 or later

[url=]Microsoft Visual Studio Support[/url]

If you are using the RFmx Demod .NET Class Library, .NET Framework 4.0 (minimum) is required. The RFmx Demod .NET Class Library can be used with Visual C# or Visual Basic .NET in any Visual Studio version that can target .NET Framework 4.0.

[url=]Installation Instructions[/url]

NI installs RFmx Demod using NI Package Manager. If you do not already have NI software installed, RFmx Demod installs NI Package Manager to handle the installation of your NI software. Visit ni.com/info and enter the Info Code NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Notes

  • If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

  • RFmx Demod installs the following licensed products

    • Analog Modulation: This will enable demodulation support of Analog Modulation (AM), Frequency Modulation (FM), and Phase Modulation (PM).

    • Digital Modulation: This will enable demodulation support of Amplitude-Shift Keying (ASK), Frequency-Shift Keying (FSK), Minimum-Shift Keying (MSK), Phase-Shift Keying (PSK), and Quadrature Amplitude Modulation (QAM).

Notes

  • If Windows Update is enabled, the installation process might hang if Windows Update interferes with the installation of Microsoft Visual C++ 2015 Run-Time. Visit ni.com/r/exjq43 for more information and steps to resolve this issue.

  • Use the serial number that is included with your software to activate RFmx Demod. For more information on RFmx Demod activation, refer to National Instruments Software Activation.

[url=]Installed Software[/url]

  • <MSTUDIOVS2010DIR> is an alias for the following National Instruments file folder location:

    • Program Files (x86)National InstrumentsMeasurementStudioVS2010

  • <NIDir> is an alias for the following National Instruments file folder location:

    • Program Files (x86)National Instruments

  • <SYSDIR> is an alias for the following file folder location:

    • WindowsSysWOW64 for 32-bit programs and windowssystem32 for 64-bit programs

File Locations

Item
Installed Location
Version Compatibility Checker<NIDir>RFmx iRFmxCompatibility_Checker.exe
Debug Configuration Utility<NIDir>RFmx iRFmxDebugConfigurationUtility.exe
DLLs<SYSDIR>
Header files
<NIDir> SharedExternalCompilerSupportCinclude
Import Library files (64-bit)

  • 32-bit: <NIDir> SharedExternalCompilerSupportClib32msvc

  • 64-bit: <NIDir> SharedExternalCompilerSupportClib64msvc

.NET Class Libraries
Assemblies<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.DemodMx.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.RFmx.InstrMX.Fx40.dll
<MSTUDIOVS2010DIR>DotNETAssembliesCurrentNationalInstruments.Common.dll

Executable

Select Start » National Instruments» RFmx Demod Measurement Interactive Panel to launch the RFmx Demod Measurement Interactive Panel.

[url=]Accessing the API[/url]

RFmx Demod palette VIs are available from the Functions » Measurement I/O » RFmx » Demod palette.

Accessing the Help

Documentation for RFmx Demod is located at Start » National Instruments » RFmx Demod Documentation. The documentation set is composed of the following documents.
Document
Format
Description
RFmx Demod HelpHTML/Windows HelpContains primary help content for RFmx Demod. This help file is an HTML version of a traditional user manual that includes the following information:

  • An introduction to RFmx Demod

  • How to get started with application development

  • A complete reference for all RFmx Demod programming functions and VIs

RFmx Demod 21.5 ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.

Finding Examples

You can access all the installed RFmx Demod examples at Start » National Instruments » RFmx Demod Examples.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.

[url=]Product Security and Critical Updates[/url]

Visit ni.com/security to view and subscribe to receive security notifications about NI products. For information about critical updates from NI, refer to Available Critical and Security Updates for NI Software.

[url=]Behavior Changes[/url]

The following items are behavior changes in RFmx Demod 20.7 from RFmx Demod 20.6.

  • Obsoleted RFmxInstr Configure Automatic SG SA Shared LO API and RFmxInstr Automatic SG SA Shared LO property. Use RFmxInstr LO Source property with Automatic_SG_SA_Shared value instead.

The following items are behavior changes in RFmx Demod 19.1 from RFmx Demod 19.0.

  • Dropped support for Cleaner Spectrum property on PXIe-5830 and PXIe-5831 devices

  • Obsoleted RFmxDemod Analyze (IQ) API. Use RFmxDemod Analyze (IQ, 1 Wfm) API instead

The following items are the behavior changes in RFmx Demod 19.0 from RFmx Demod 3.0.

  • Dropped support for LabVIEW 2015

  • Deprecated the Recommended I/Q Measurement Bandwidth property in RFInstr

[url=]Automating the Installation of NI Products[/url]

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.

[url=]Using NI Software with Microsoft Windows 10[/url]

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Legal Information

Copyright
© 2014–2022 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
374855V-01


首页
84162741QQ
联系