石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
百度云盘下载:
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看
法语德语日语韩语版本NI下载地址：
请购买附件下载查看
NI LabVIEW2009SP1 Win32ENG/FRE/GER/JPN/KOR LV2009SP1英语/法语/德语/日语/韩语版
http://pcmv.cn/thread-21573-1-1.html?fromuid=9
(出处: 机器视觉论坛)
LabVIEW 2009 Service Pack 1 Readme for Windows
Installing LabVIEW 2009 SP1
Installing Another Language Version
Licensing
Known Issues
Windows 7 Issues
LabVIEW 2009 SP1 (64-bit)
Supported Hardware
Supported Modules
Additions to the LabVIEW Help
LabVIEW 2009 SP1 supports the Windows Server 2003 R2 (32-bit) and Windows Server 2008 R2 (64-bit) editions. LabVIEW does not support the Windows Server non-R2 editions.
When you open a VI snippet ni.com for more information about opening individual probe windows.
In LabVIEW 8.6.x and earlier, you can define custom error codes in the range of –8999 through –8000 and 5000 through 9999. In LabVIEW 2009 and related service packs, you also can define custom error codes in the range of 500,000 through 599,999.
LabVIEW 2009 and related service packs include changes to the following VIs:
The mse output of the General Polynomial Fit VI and the General Linear Fit VI is renamed residue. The General Linear Fit VI also includes the covariance selector input that indicates whether the VI computes the covariance matrix.
The algorithm input of the General Polynomial Fit VI changed from a 32-bit unsigned enumerated data type to a 16-bit unsigned numeric data type.
The filter type input of the Bessel Filter PtByPt VI, Butterworth Filter PtByPt VI, Chebyshev Filter PtByPt VI, Elliptic Filter PtByPt VI, and Inverse Chebyshev Filter PtByPt VI changed from a 16-bit unsigned enumerated data type to a 32-bit unsigned enumerated data type.
The section and refnum inputs of the Get Key Names VI, the refnum input of the Get Section Names VI, and the refnum input of the Not a Config Data Refnum VI are required inputs.
The path input of the Get LV Class Default Value VI is renamed class path.
The class data output of the Get LV Class Default Value VI is renamed object.
The lv object output of the Get LV Class Path VI is renamed object.
LabVIEW 2009 and related service packs include the following miscellaneous VI behavior changes:
The Exponential Fit VI was rewritten with one new input and one changed input. Replace versions of this VI from previous versions of LabVIEW with an Exponential Fit VI from the Functions palette to use the new functionality.
The Gaussian Peak Fit VI was rewritten with two new inputs in LabVIEW 2009 and later. Replace versions of this VI from previous versions of LabVIEW with a Gaussian Peak Fit VI from the Functions palette to use the new functionality.
The Open Config Data VI was rewritten with one new input. Replace versions of this VI from previous versions of LabVIEW with an Open Config Data VI from the Functions palette to use the new functionality.
On the Pie Graph and Bar Graph, the Add, Delete, Up, and Down buttons are disabled.
In LabVIEW 8.6 and earlier, the user locale determines the font script. In LabVIEW 2009 and related service packs, the system locale determines the font script. To change the system locale, open the Windows Control Panel, double-click Regional and Language Options, click the Advanced tab of the Regional and Language Options dialog box, and select the language from the pull-down menu that correponds to the encoding you want to display in LabVIEW. After you select the language, you must restart the system.
Bug Fixes
<font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;">
| ID | Legacy ID | Fixed Issue |
| 93296 | 4FSGQ6C4 | Terminal information is not being passed correctly |
| 122321 | - | Mixed Signal Graph does not resize plot legend when in executable |
| 145796 | - | Choose implementation dialog does not bring-to-front VIs which are already open but hidden |
| 158487 | - | Application Builder errors when building file with a slash in the file name |
| 160585 | - | Error message when path is too long in building an application |
| 162215 | - | Cannot change RT FIFO from multiple variable editor |
| 171913 | - | 3D Graph Surface Plot Color Matrix Yields Colorless Surface |
| 173068 | - | Error when trying to drop things from the HTML help |
| 174619 | - | Open and Closing VIs with variables leak about 50-200 KB of memory |
| 175643 | - | Deployment dialog display on built application |
| 175788 | - | Measurement & Automation Explorer (MAX) could not be launched from LabVIEW on Windows 2000 |
| 175997 | - | 3D Comet Plot does not show the animation and static plot in application with default build settings |
| 176266 | - | Plot of Waveform Graph cannot be renamed in property page if input terminal is wired |
| 176379 | - | Crash when fixed point number is wired to a case structure |
| 176597 | - | Get/Set Control Value and Run VI Methods fail when used with a strict VI reference to a reentrant VI |
| 176834 | - | Inserting a feedback node on a wire drops corrupted feed forward node |
| 176860 | - | Terminals property of feedback node doesn't include the enable terminal |
| 177230 | - | Weather Monitor example readme file is corrupted for French |
| 177239 | - | LabVIEW crashes when a VI tries to deploy its parent library programmatically |
| 178232 | - | Block Diagram Clean Up may break VI when cleaning up large VIs |
| 178234 | - | Data Value References wires do not coerce |
| 178313 | - | VI hierarchy shows tip strip with old (library-qualified) name when VI is removed from the library |
| 178614 | - | Type defined constant can lose value when updating to edited typedef if feedback node also on diagram |
| 179002 | - | Changing variable container property node causes LabVIEW to crash |
| 179140 | - | LabVIEW hangs when trying to restoring the topmost windows |
| 179375 | - | LabVIEW crashes when using "To Variant" with Single Process variable |
| 179472 | - | The Write to Measurement File Express VI cannot be set to "Save to series of files" |
| 179677 | - | Dependency conflicts for internal VIs in stored in vi.lib may appear when upgrading projects |
| 179711 | - | Web Service palette VI reads incorrectly |
| 179854 | - | Invalid variable configuration when opening variable properties |
| 180451 | - | Application builder UI hangs |
| 181098 | - | Call Library Node with unwired Error Out no longer puts up error dialog |
| 181478 | - | A class dynamically loaded into a running framework which statically loads its own child may not reserve the child's VIs correctly |
| 181495 | - | Nested parallel FOR loops are not completely parallel |
| 182053 | - | Custom About screen not displayed with a LabVIEW built application |
| 182414 | - | Memory leak when probing an error cluster in a while loop |
| 182420 | - | LabVIEW hangs when using highlight execution with more that 17 I/O Variables |
| 182771 | - | Open VI Reference using strictly typed constant results in 1031 error |
| 182831 | - | LLBs are not detected in project when located in auto-populating folders |
| 182844 | - | Tab Controls don't save Default Visible Tab |
| 182865 | - | VI Crashes on load if Call by Reference Node Statically Configured to a VI and has a Reference Out wired |
| 182961 | - | New value node in timeout event structure |
| 182990 | - | LabVIEW crashes when changing shared variable property |
| 183005 | - | Save for Previous to 8.5 or older will crash if VI contains an event structure |
| 183239 | - | LabVIEW crashes when adding a folder to project |
| 183560 | - | Graph does not display timestamps on X-axis as expected when using timestamp data type |
| 183837 | - | Type uintptr_t * cannot be built into a shared library (DLL) |
| 183972 | - | Conflict message when main VI in project opens |
| 184040 | - | Not a refnum constant wired to a mouse down event causes compile error |
| 184077 | - | LabVIEW Load Error Code 3: Could Not Load Front Panel When Opening a VI in the Development Environment |
| 184463 | - | Open VI Reference cannot recognize type when upgraded to LabVIEW 2009 |
| 184557 | - | User defined refnums are improperly grouped |
| 185219 | - | Error 1502 while building a LabVIEW application |
| 185348 | - | VIs with large data types (like the Enum) will crash on load after being saved in LabVIEW 2009 |
| 185812 | - | Crash when saving for previous version |
| 185867 | - | Aggregate comparator causes LabVIEW to crash |
| 185980 | - | Editing An Event Structure With A String Event Might Crash Localized Versions Of LabVIEW 2009 |
| 186211 | - | LabVIEW crashes when saving for previous version |
| 186276 | - | Certain references (NI SoftMotion, WSN...) may incorrectly refer to data associated with a different reference |
| 186392 | - | Cannot Save sparse rings with unit labels in LabVIEW 2009 |
| 186404 | - | Default values lost when upgrading from LabVIEW 7.1 |
| 186418 | - | Image Display control does not update using Value property node in a LabVIEW built application |
| 186602 | - | Application Builder uses too much memory, which may result in build failures |
| 187349 | - | Subtract output is wrong when coercing values to I64 or U64 |
| 187427 | - | Open and Close VI Reference take very long time when large project opened |
| 187457 | - | Visible VI options in Web Server options of LabVIEW disabled. |
| 187493 | - | Wrong behavior for some VIs in XML.lvlib |
| 187670 | - | LabVIEW leaks memory when certain VIs in the NI_AALPro.lvlib are called using VI Server |
| 187759 | - | Cannot launch LabVIEW 2009 when using Microsoft Mandatory User Profiles |
| 188140 | - | Parallel port examples unusable in localized environment |
| 188425 | - | .mnu files with same name conflict even if they have different namespaces. |
| 188669 | - | Datalog Files Created in LabVIEW 2009 Cannot Be Opened in LabVIEW 8.6.x |
| 189527 | - | LabVIEW crashes when using some ProjectIems property |
| 189548 | - | LabVIEW Interop assembly cannot use cluster arrays properly |
| 189649 | - | LabVIEW crashes when Open Application Reference uses IP Address and Open VI reference has empty path input |
| 189820 | - | Clicking the ReadMe link from the autorun installation dialog will fail to open the html file in Internet Explorer 8 |
| 190472 | - | Opening large project crashes LabVIEW |
| 190703 | - | LabVIEW can leak memory when the Extract Single Tone Information 1 Chan.vi is called using VI Server |
| 190704 | - | LabVIEW Configuration File VIs leak memory when called using VI Server |
| 190705 | - | LabVIEW can leak memory when the Error Cluster From Error Code.vi is called using VI Server |
| 190758 | - | LabVIEW can leak memory when repeatedly opening a VI reference |
| 191404 | - | LabVIEW fails to compile if decimate 1D array.vi is used with string arrays |
| 191413 | - | gemv - General Matrix - Vector Product.vi in LabVIEW 2009 Produces incorrect result when run within a loop |
| 191814 | - | Crash when loading LabVIEW runtime from NI TestStand |
| 191830 | - | Not all probes work if multiple windows are open |
| 192167 | - | Using Cast Unit Bases and Convert Unit VI with Array Subset VI gives compile error |
| 192480 | - | Digital Graph legend does not scale properly |
| 192579 | - | LabVIEW 7.1 Storage VIs can no longer overwrite TDM file bulk data after installation of LabVIEW 2009 |
| 192667 | - | Common subexpression elimination combines fixed-point arithmetic incorrectly in VIs with debugging disabled |
| 194522 | - | Digital Waveform with empty data can crash LabVIEW |
| 195627 | - | Information returned from a subVI is not consistent in LabVIEW 2009 |
179375—LabVIEW crashes when using To Variant with Single Process variable
181098—Call Library Node with unwired Error Out no longer puts up error dialog
184557—User defined refnums are improperly grouped
186276—Certain references (NI SoftMotion, WSN...) may incorrectly refer to data associated with a different reference
187349—Subtract output is wrong when coercing values to I64 or U64
190703—LabVIEW can leak memory when the Extract Single Tone Information 1 Chan.vi is called using VI Server
190704—LabVIEW Configuration File VIs leak memory when called using VI Server
190705—LabVIEW can leak memory when the Error Cluster From Error Code.vi is called using VI Server
190758—LabVIEW can leak memory when repeatedly opening a VI reference
191404—LabVIEW fails to compile if decimate 1D array.vi is used with string arrays
192667—Common subexpression elimination combines fixed-point arithmetic incorrectly in VIs with debugging disabled
195627—Information returned from a subVI is not consistent
Open LabVIEW.
Select Tools»Advanced»Mass Compile to display the Mass Compile dialog box.
Navigate to the desired directory and click the Current Folder button.
Click the Mass Compile button to force a recompile of all VIs in that directory.
Click the Done button to return to LabVIEW.