Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Acquisition Software 17.5 Readme

Overview

• NI-IMAQ is driver software for the following device types:
  

• NI 17xx smart cameras

• analog cameras

• parallel digital cameras

• Camera Link cameras
  

• NI-IMAQdx is driver software for the following device types:
  

• NI 177x smart cameras

• ISC-178x smart cameras

• GigE Vision-compliant cameras

• USB3 Vision-compliant cameras

• IIDC/DCAM-compliant IEEE 1394 cameras

• DirectShow-compatible cameras

• Basler and Axis IP cameras
  

• NI-IMAQ I/O is driver software for controlling reconfigurable input/output (RIO) on image acquisition devices and real-time targets. The following hardware is supported by NI-IMAQ I/O:
  

• NI CVS-1457RT

• NI CVS-1458

• NI CVS-1458RT

• NI CVS-1459

• NI CVS-1459RT

• NI EVS-1463

• NI EVS-1463RT

• NI EVS-1464

• NI EVS-1464RT

• NI PCI-8254R

• NI PCIe-8255R

• NI PCIe-8237R

• NI PCIe-1473R

• NI PCIe-1473R-LX110

• NI 1483 FlexRIO Adapter Module
  

• Note: New versions of Vision Acquisition Software no longer support the following hardware:
  

• NI 1762 and 1764 Smart Cameras

• NI CVS-1454, 1455, and 1456 Compact Vision Systems
  

• Note: The EVS-146x series of controllers are not supported in LabVIEW 2016 or later.
  

Additional Driver Software

• The NI PCIe-1473R and NI PCIe-1473R-LX110 require NI FlexRIO software to access the DRAM resources in a LabVIEW FPGA project.

• The NI 1483 FlexRIO Adapter Module requires NI FlexRIO software.
  

System Requirements

Product Security and Critical Updates

NI Application Software Support

NI Vision Acquisition Software .NET Support

Vision Standards Support

New Features

• No new features for this release
  

• Added support for LabVIEW NXG 2.0
  

  NI-IMAQ and NI-IMAQdx integrate with NI Measurement & Automation Explorer (MAX), the National Instruments utility for configuring and testing your measurement and automation system. The NI MAX icon appears on your desktop after you install NI Vision Acquisition Software.

  Installing from an NI Software Suite or NI Product Bundle

  If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

  Configuring NI-IMAQ

  Complete the following steps to install an image acquisition device and configure NI-IMAQ.
  Note: You must install NI-IMAQ before installing your image acquisition device.
  Caution: Power off and unplug the computer before installing your hardware. Wait for any motherboard LEDs to power off before proceeding, since some computers remain powered for some time after being unplugged.
  Tip: For a complete list of supported cameras, right-click the channel or port, select Camera, and click Search ni.com.
  Note: Refer to the right side of the MAX user interface, which displays context-sensitive help, for information about configuring image acquisition devices with NI MAX.

  Configuring a Remote PXI/Compact PCIe Image Acquisition Device

  Use NI MAX to install NI-IMAQ for LabVIEW Real-Time from the host machine onto the target system. The NI-IMAQ for LabVIEW Real-Time components enable the remote device to acquire and analyze images as directed by the host machine.
  Note: Install NI-IMAQ and the LabVIEW Real-Time Module on the remote system before you install and configure the image acquisition device. Follow the steps in the NI MAX help window to install software.
  Tip: Configuring remote image acquisition devices is similar to configuring local image acquisition devices, except that the procedure for working with camera files is different. Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about working with camera files on remote image acquisition devices.
  Refer to the Measurement & Automation Explorer Help for NI-IMAQ for information about configuring specific NI image acquisition devices. You can access this help file from the NI MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQ.

  Configuring NI-IMAQdx

  Complete the following steps to configure NI-IMAQdx.
  If you are using a USB webcam or other DirectShow-compatible camera, ensure that the camera driver is installed and functioning. For specific information about drivers and camera compatibility, consult your camera manufacturer documentation.
  Instructions for configuring an IEEE 1394, USB3 Vision, GigE Vision, or IP camera are included in the Measurement & Automation Explorer Help for NI-IMAQdx. You can access this help file from the MAX Help menu by selecting Help»Help Topics»NI Vision»NI-IMAQdx.

  Installing the High Performance GigE Vision Driver

  If you have an Intel Pro/1000 Series gigabit Ethernet Network Interface Card (NIC), it is recommended that you install the High Performance GigE Vision Driver. This will ensure optimized performance and minimal configuration. To associate your hardware with the high performance driver, complete the following steps.

  NI Vision Acquisition Software Documentation for LabVIEWNI Vision Acquisition Software Documentation for LabWindows/CVINI Vision Acquisition Software for Eclipse and other Text-based Development EnvironmentsUsing NI Software with Microsoft Windows 10

  Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

  Using NI Software with Microsoft Windows 8.1

  When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

  LabVIEW NXG Considerations

  For information about VAS support in LabVIEW NXG, visit ni.com/info and enter the Info Code VisionNXGGuide.
  In LabVIEW NXG, NI-IMAQdx supports only the following:
  For advanced camera configuration or renaming support, use NI MAX.

  ---

  Legal Information

  Copyright
  © 2018 National Instruments. All rights reserved.
  Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
  National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
  End-User License Agreements and Third-Party Legal Notices
  You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
  U.S. Government Restricted Rights
  If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
  IVI Foundation Copyright Notice
  Content from the IVI specifications reproduced with permission from the IVI Foundation.
  The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  Trademarks
  Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
  Patents
  For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
  375130G-01

• Notices are located in the <National Instruments> directories.

• EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
  

• GigE Vision-compliant cameras

• USB3 Vision-compliant cameras

• IIDC/DCAM-compliant IEEE 1394 cameras (not available in the measurement panels or System Designer)

• DirectShow-compatible cameras

• Basler and Axis IP cameras
  

• Getting Started with C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition with the NI Vision Development Module and NI-IMAQdx—Describes how to use the C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition to develop an example C application using the NI Vision Development Module API and/or NI-IMAQdx, and deploy it on a Linux remote target. This tutorial outlines the basic steps required to build and deploy an example application. This document is installed to <Users>PublicPublic DocumentsNational Instruments.
  

• versionsamples
  

• NI-IMAQ Function Reference Help—Contains reference information about NI-IMAQ functions for LabWindows/CVI.

• NI-IMAQdx Function Reference Help—Contains reference information about NI-IMAQdx functions for LabWindows/CVI.

• Function panel help within LabWindows/CVI—Allows you to right-click within each function to access help for that function, control, function class, and function library. The NIIMAQdx.fp, and <National Instruments>CVIBin.

• Example programs are installed to
  
  

• You can access the NI-IMAQ VI Reference Help, NI-IMAQdx VI Reference Help, and NI Vision-RIO VI Reference Help from the LabVIEW Help menu.

• NI Example Finder—Illustrates common applications you can create with NI Vision Acquisition Software. In LabVIEW, select Help»Find Examples. Click the Help button in the NI Example Finder to display the NI Example Finder Help. Vision Acquisition Software examples for LabVIEW are installed to <LabVIEW> is the location LabVIEW is installed.
  

• Install the NIC.

• Right-click the NIC in the Device Manager, and select Update Driver.

• Choose Browse my computer for driver software.

• Browse to the driver location. The newest driver version is installed to <National Instruments>MAXHelp.
  

• Launch NI MAX.

• In the Configuration tree, expand Remote Systems.

• Expand the appropriate system.

• Expand Devices and Interfaces.

• Expand NI-IMAQ Devices.

• Expand the device you want to configure.
  

• Click the plus sign next to the image acquisition device to expand the menu tree and list the available channels or ports. Right-click the channel or port to display a list of available cameras.

• Select the appropriate camera type from the list. Camera type selection varies according to the image acquisition device installed.

• To change the camera settings, modify the parameters at the bottom of the image viewer panel.

• You can acquire an image in the following ways:
  
  

• Use the Snap button to acquire and display a single image with the image acquisition device.

• Use the Grab button to acquire images continuously. A grab allows you to focus the camera.
  

• Double-click the NI MAX icon on the desktop. You can use NI MAX to modify camera properties. Once you have saved these properties, they become the default settings for all NI-IMAQ applications.

• Expand Devices and Interfaces and NI-IMAQ Devices to display a list of the image acquisition devices installed on your computer.
  

• Install your image acquisition device, and connect the camera. Refer to the device documentation for specific hardware installation instructions.

• Run NI MAX.
  

• Select a camera file, and acquire an image.
  
  

• For information about VAS support in LabVIEW NXG, visit autorun.exe. If you have autorun enabled, autorun.exe runs automatically.

• Follow the onscreen instructions.
  

• 上篇：NI Vision Acquisition Software 17.1 LabVIEW2017 Win32/64Eng 视觉采集软件VAS1710下载
• 下篇：NI Vision Acquisition Software 18.0 LabVIEW2018 Win32/64Eng 视觉采集软件VAS1800下载
• 标签：NI Vision Acquisition Software视觉采集软件VASLabVIEW相机驱动软件IMAQdx相机驱动LabVIEW视觉驱动程序NI视觉采集软件