Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI Vision Acquisition Software 2014.02 LabVIEW2013SP1 Win32/64Eng 视觉采集软件VASFebruary2014下载
百度云盘下载：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载地址（可能无效或无法下载完成）：
标准下载：
请购买附件下载查看
下载器下载：
请购买附件下载查看
文件大小: 2215201850 字节 (2.06 GB)
修改日期: 2014-03-29 18:06
MD5: 03ee5a62b5e93f6507ca95af287e4e1a（官方正确）
SHA1: d878b946a66dd996712de1c5080cbfe35c3ef944
SHA256: 42433d11662eb217428ad0c273530e75e220c8a3d96b41bc4e61e316b9464c4b
CRC32: db067a15
NI Vision Acquisition Software 2014.02 LabVIEW2013SP1 Win32/64Eng 视觉采集软件VASFebruary2014下载
http://pcmv.cn/thread-2669-1-1.html?fromuid=9
(出处: 机器视觉论坛)
Download Language: English
Product Line: Vision Software
Version: 2014.02
Release date: 02-14-2014
Software type: Driver
Operating system: Windows 8 32-bit; Windows 8 64-bit; Windows 7 64-bit; Windows 7 32-bit; Windows Vista; Windows XP 32-bit; Windows Server 2008; Windows Server 2003 R2 32-bit
NI Vision Acquisition Software Release Notes
February 2014
This file contains important information about National Instruments Vision Acquisition Software, and is organized into the following sections:
New Features
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
Minimum System Requirements
Updates and Improvements
Software Support
Installation
Automating the Installation of NI Products
Configuring NI-IMAQ
Configuring NI-IMAQdx
Known Issues
Documentation
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
NI Vision Acquisition Software allows you to acquire, display, and save images; control digital I/O on National Instruments image acquisition devices; and configure your driver software and hardware.
New Features
This release of Vision Acquisition Software includes the following new features:
NI-IMAQ 4.9
NI-IMAQ is driver software for NI 17xx smart cameras, as well as analog, parallel digital, and Camera Link image acquisition devices.
NI-IMAQdx 4.3.5
NI-IMAQdx is driver software that supports NI 177x smart cameras, as well as IEEE 1394, GigE Vision, DirectShow-compatible USB, USB3 Vision cameras, and IP cameras.
NI-IMAQ I/O 2.9
NI-IMAQ I/O provides support for reconfigurable input/output (RIO) using National Instruments EVS-1460 Series Embedded Vision Systems, compact vision systems, and other GigE Vision and IEEE 1394 reconfigurable image acquisition devices.
Upgrade Considerations for Legacy NI-IMAQ for IEEE 1394 Cameras
NI-IMAQdx no longer supports Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls the Legacy NI-IMAQ for IEEE 1394 Cameras feature of NI-IMAQdx 3.3 or earlier. If you require Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/infoand enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx does not affect separate installations of Legacy NI-IMAQ for IEEE 1394 Cameras.
Porting Existing Legacy NI-IMAQ for IEEE 1394 Cameras Applications to NI-IMAQdx
In most cases, there is a one-to-one correlation between an NI-IMAQdx VI or function and Legacy NI-IMAQ for IEEE 1394 Cameras VI or function. For example, the IMAQ 1394 Snap VI has been replaced with the IMAQdx Snap VI and takes similar parameters.
You set and get camera attributes differently for each driver. For example, with Legacy NI-IMAQ for IEEE 1394 Cameras, you passed in an enumerated type that contained the attribute name and a value. With NI-IMAQdx, you pass a string with the attribute name and value.
Another major difference between the two drivers is that NI-IMAQdx now supports the Event Structure in LabVIEW. Rather than using occurrences, as you did with Legacy NI-IMAQ for IEEE 1394 Cameras, you can now register the Frame Done event to fire in LabVIEW for more readable code.
Maintenance and Support Policy
National Instruments recommends that all new applications be developed with NI-IMAQdx. All new features, bug fixes, or other enhancements in the future will be made to the NI-IMAQdx driver and API. NI-IMAQ for IEEE 1394 Cameras is "frozen" to ensure that the behavior of existing applications does not change. NI-IMAQdx no longer includes Legacy NI-IMAQ for IEEE 1394 Cameras. This version of NI-IMAQdx uninstalls Legacy NI-IMAQ for IEEE 1394 Cameras. If you requires Legacy NI-IMAQ for IEEE 1394 Cameras, you must download and install it separately. Visit ni.com/info and enter the info code legacy1394 for information about how to install Legacy NI-IMAQ for IEEE 1394 Cameras. National Instruments Applications Engineers no longer support the Legacy NI-IMAQ for IEEE 1394 Cameras API.
Minimum System Requirements
The development computer must meet the following requirements to run NI Vision Acquisition Software:
| Processor | Pentium 4 1 GHz or equivalent |
| Memory | 512 MB RAM |
| Display | 1,024 × 768 resolution video adapter with a 16-bit display |
Minimum Recommended
Free Hard Disk Space | Vision Acquisition Software | 2 GB |
| NI-IMAQ | 1 GB |
| NI-IMAQdx | 1 GB |
| NI-IMAQ I/O | 1.5 GB |
| Operating System | Windows 8/7/Vista/XP SP3 (32-bit)/Server 2012 R2/Server 2008 R2/Server 2003 R2 (32-bit) |
| Browser | Microsoft Internet Explorer 6.0 or later |
Updates and Improvements
The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.
| ID | Fixed Issue |
| 443429 | NI Linux RT targets hang when a VI server call unloads IMAQdx DLL. |
| 441110 | Vision Acquisition Express VI loses settings when edited. |
| 411312 | BayerGR10, BayerGR12, BayerGR14, and BayerGR16 pixel formats do not support a U16 image type. |
| 417567 | Cannot discover myRIO targets after dropping IMAQdx VIs. |
| 436339 | IMAQdxDispose is not listed in C API. |
| 430510 | Cannot use more than one USB3 vision camera with the cRIO-9068 controller. |
| 440203 | The Simulate Acquisition function of the Express VI does not load images. |
| 433953 | Bottom to Top tap orientation causes hang on camera files with multiple taps. |
| 438571 | Output Image Type attribute does not switch between U16 and I16 image signedness. |
| 411296 | The Bayer bilinear algorithm does not properly decode pixels on the right side of the image for certain image widths. |
| 443279 | NI-IMAQ Property Node does not show all supported hardware under the Interface Type property. |
Software Support
This section describes the operating systems and application development environments (ADEs) supported by NI Vision Acquisition Software.
Operating Systems
LabVIEW Real-Time Module 2010 or later
(32-bit) Windows 8/7/Vista/XP SP3 (32-bit) SP2/Server 2012 R2/Server 2008 R2/Server 2003 R2
(64-bit) Windows 8/7/Vista/Server 2012 R2/Server 2008 R2
Note NI Vision Acquisition Software does not support Windows Server non-R2 editions.
Firmware Update
A firmware update is available for the following devices to allow non-LabVIEW applications to run on systems with more than 3GB of physical memory:
NI PCIe-1427
NI PCIe-1429
NI PCIe-1430
To update the device firmware, launch MAX and select Tools»NI Vision»Update NI-IMAQ Device Firmware.
Remote Target Support
NI Vision Acquisition Software September 2011 was the last version of NI Vision Acquisition Software to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.
NI Vision Acquisition Software February 2013 was the last version of NI Vision Acquisition Software to provide support for the NI 1454, 1455, and 1456 Compact Vision Systems. New software features of NI Vision Acquisition Software will not work on these devices. Backward compatibility for existing applications is maintained.
Development Environments
LabVIEW 2010 or later
LabWindows/CVI 8.1 or later
Microsoft Visual C/C++ 6.0 or later
Microsoft Visual Basic 6.0 or later
Microsoft Visual Studio .NET 2005 and 2008 (except NI-IMAQ I/O)
Additional Software
You can also use NI-IMAQ, and NI-IMAQdx with the following National Instruments software packages to prototype, benchmark, and deploy your applications.
Installation Instructions
Complete the following steps to install NI Vision Acquisition Software:
Note: You must have administrator access to install the NI Vision Acquisition Software.
Insert the NI Vision Acquisition Software installation media.
If you do not have autorun enabled, double-click <Measurement Studio> is the location to which Measurement Studio is installed. The help launches in a stand-alone help viewer.
From Visual Studio, select Measurement Studio»NI Measurement Studio Help.
If you do not have Measurement Studio installed:
How to Use NI Software with Microsoft Windows 8
When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.
NI Vision Acquisition Software Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments Vision Acquisition Software will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of Vision Acquisition Software that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Copyright
© 2014 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments> directories.
EULAs are located in the <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks.
The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
