石鑫华视觉 手机微信QQ:13450001061

下载中心

NI Vision Development Module 2012 SP1 Win32/64Eng 视觉开发模块VDM2012SP1 适用LabVIEW2012SP1

文章来源:石鑫华视觉网时间:2022-06-23 12:14:37 点击:273

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html

NI Vision Development Module 2012 SP1 Win32/64Eng 视觉开发模块VDM2012SP1 适用LabVIEW2012SP1

百度云盘下载地址：
EXE版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
ISO版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看
ZIP版：
链接: 请注册视觉论坛会员登陆后购买附件下载查看
提取码: 请购买附件下载查看

NI官方下载地址（可能无效或无法下载完成）：
请购买附件下载查看

NI Vision Development Module 2012 SP1 Win32/64Eng 视觉开发模块VDM2012SP1 适用LabVIEW2012SP1

http://pcmv.cn/thread-294-1-1.html?fromuid=9

(出处: 机器视觉论坛)


NI Vision Development Module 2012 SP1 Readme

December 2012
This file contains important information about National Instruments Vision Development Module and is organized into the following sections:
General Information
New Features
Updates and Improvements
System Requirements
Installation Instructions
How to Activate the NI Vision License
Deploying Vision Applications
Automating the Installation of NI Products
Known Issues
Documentation and Examples
Refer to the Machine Vision Web site at ni.com/vision for the latest information about the NI Vision Development Module.

General Information

Installing this program may remove previous versions of the NI Vision Development Module that are currently installed.
The NI Vision Development Module 2012 SP1 supports LabVIEW 8.6, 2009, 2010, 2011, and 2012; Visual Studio 2005 and 2008; and LabWindows™/CVI™ 8.1 or later. The installer specifically allows side-by-side installations of NI Vision for each of the supported versions of LabVIEW, enabling you to use the NI Vision Development Module with multiple versions of LabVIEW. National Instruments recommends that you install LabVIEW, LabVIEW Real-Time, or any other supported development environment, before installing the NI Vision Development Module.
Note: The NI Vision Development Module overwrites existing NI Vision examples and NI Vision VIs. Move modified examples or VIs that you want to save to another directory before installing the NI Vision Development Module.

New Features

This release of the NI Vision Development Module includes the following new features:

  • Support for LabVIEW 2012 SP1 (32-bit) and LabVIEW 2012 SP1 (64-bit)

  • Improved AVI VIs, which now support mulitple codecs, RT targets, and 64-bit operating systems. The Vision Development Module now installs several tested codecs.

  • Improvements to the accuracy of the IMAQ Calibration Target to Points - Circular Dots 2 VI

  • New IMAQ Bayer to RGB VI for decoding Bayer-encoded images

  • The ability to specify how geometric pattern matches are scored using the IMAQ Advanced Setup Match Geometric Pattern 2 VI

  • The ability to learn all curves in a template image in the NI Vision Template Editor

  • Support for the ISO 15415-2004 and AIM DPM-1-2006 Data Matrix grading standards in C and .NET

Updates and Improvements

The following list describes issues in previous versions of the NI Vision Development Module that are fixed in this release. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of the NI Vision Development Module.
IDFixed Issue
345582The "New Character Set File" button in the OCR/OCV step fails to launch the NI OCR Training Interface.
368426The stereo session crashes if the session is accessed after disposal.
360788In the Stereo Vision examples, the Invalid Disparity value is not connected to the IMAQ Get Depth Image From Stereo VI.
378248The IMAQ Stereo Corresponence (SG Block Matching) VI returns low values in a score image when the window size is greater than 7.
369215Using the Semi Global Block Matching Algorithm in the Stereo Vision Example results in an error.
364983The IMAQ Get Maximum Disparity VI returns invalid data.
364780The IMAQ Learn Binocular Stereo Calibration VI returns poor quality metrics when each camera is calibrated with a distance between points of less than 1.0.
359700The IMAQ Stereo Correspondence (SG Block Matching) VI does not throw an error when the replacement value for invalid pixels is within the valid disparity range.
36045The Vision Assistant Acquire Image step does not allow you to select a device channel.
35690When acquiring from a PXI system in Vision Assistant, boards on PXI systems have no description.
299066LabVIEW code generated from the Vision Assistant Max Clamp step fails to publish results to the results manager.
35699Remote systems are not automatically detected in Vision Assistant.

System Requirements

The development computer must meet the following system requirements to run the NI Vision Development Module:

MinimumRecommended
Processor233 MHz Pentium or equivalentPentium 4/M or equivalent
Memory256 MB RAM512 MB RAM
Display1,024 × 768 resolution video adapter with a 16-bit display1,024 × 768 resolution video adapter with a 24- or 32-bit display
Free Hard Disk Space
1.4 GB
Operating System
Windows 8/Windows 7/Vista/XP (32-bit)/Server 2008 R2/Server 2003 R2 (32-bit)
Browser
Microsoft Internet Explorer 6.0 or later

Remote Target Support

NI Vision Development Module 2011 SP1 was the last version of NI Vision Development Module to provide support for the NI 1762 Smart Camera and the NI 1764 Smart Camera. New software features of NI Vision Development Module will not work on these devices. Backward compatibility for existing applications will be maintained.

Installation InstructionsInstalling from the LabVIEW Platform DVDs

If you purchased LabVIEW, you can install all of your LabVIEW products—including the NI Vision Development Module—using the LabVIEW Platform DVDs.
To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site.

Installing from the NI Vision Development Module Installation Media

Complete the following steps to install the NI Vision Development Module from the NI Vision Development Module installation media.

  • Log on as an administrator or as a user with administrator privileges.

  • Insert the NI Vision Development Module installation media.

  • If you do not have autorun enabled, double-click SideCrash1.avi and <CVI>inNIVision.lfp, where <CVI>SamplesVision.

NI Vision for .NET Documentation

The NI Vision .NET documentation merges into the NI Measurement Studio Help. The NI Measurement Studio Help integrates into the Visual Studio Combined Help Collection under the Measurement Studio node in the Table of Contents. In order for links from Measurement Studio help topics to .NET Framework help topics to work, you must install the product documentation for Visual Studio, which installs the MSDN Library. This requires a secondary installation during the Visual Studio installation process.
The NI Measurement Studio Help is in the Microsoft Help 2.0 format and requires a Microsoft Help 2.0 viewer to be displayed. A Microsoft Help 2.0 viewer is installed with both Microsoft Visual Studio and the Microsoft .NET Framework SDK. The SDK is freely available from MSDN at http://www.microsoft.com/downloads. If you do not have either of these products, you will need a standalone Microsoft Help 2.0 viewer to display the documentation. Some Help 2.0 viewers are available for download, such as Helpware's H2Viewer.

  • NI Measurement Studio Help—Contains reference information about NI Vision for .NET objects. Describes how to create machine vision and image processing applications in Visual Basic .NET and C# using the NI Vision Development Module. You can launch the NI Measurement Studio Help in the following ways:

    If you have Measurement Studio installed:


    Trademarks

    National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
    Other product and company names mentioned herein are trademarks or trade names of their respective companies.

    Patents

    For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

    • From the Windows Start menu, select Start»All Programs»National Instruments»<Measurement Studio>»Measurement Studio Documentation, where <Vision>ExamplesdotNET, where <National Instruments>_Legal Information and <National Instruments>SharedMDFLegallicense directory.

    • Review <font face="" "="" style="margin: 0px; padding: 0px; overflow-wrap: break-word;"><National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.


首页
84162741QQ
联系