Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI Vision Builder for Automated Inspection 2.6.1 Win32Eng 自动化检测视觉生成器VBAI2.6.1 LV7.1
标准图像处理软件，Windows系统32位英文版本。2005年发布，NI Vision Builder AI与LabVIEW7.1.1同期。部分功能需要LabVIEW7、LabVIEW7.1、NI VISION7.1以后版本支持。
百度云盘下载：
链接: 请购买附件下载查看
提取码: 请购买附件下载查看
NI官方下载（不一定有效或无法完成下载）：
请购买附件下载查看
NI Vision Builder for Automated Inspection 2.6.1 Win32Eng 自动化检测视觉生成器VBAI2.6.1 LV7.1
http://pcmv.cn/thread-22769-1-1.html?fromuid=9
(出处: 机器视觉论坛)
VBAI2.6.1自述文件
All rightsreserved.
General Information
Note: You must be logged in with administrator privileges to install VisionBuilder AI.
a.Insert the Vision Builder AI CD into your computer. If the CD startup screendoes not appear, use Windows Explorer to run the Setup.exe program from the Vision Builder AI CD.
b.Follow the setup instructions on your screen.
5) The Vision Builder AI installercreates the following directory structure under the Vision Builder AI 2.6directory:
· ImageAcquisition and Digital I/O support for the NI PCI-8254R device.
· Geometric Matching stepfor locating templates that are characterized by distinct geometric or shapeinformation.
· ParticleClassification step for training and classifying samples in images based ontheir shape.
· ColorMeasurement step for measuring color intensities in RGB, HSL, CIE L*a*b*, andCIE XYZ color images.
· Run LabVIEW VIstep for running custom VIs from within a VisionBuilder AI script. Custom VIs must be written usingLabVIEW 7.1.
· Modbus/TCPSupport for Modbus Slave step and Modbus Slave Product Selection.
· TCP I/O Stepfor communicating with third-party devices over Ethernet.
· ActiveXcomponent for the Vision Builder for AutomatedInspection engine.
· Developmenttoolkit for creating custom Vision Builder AI steps inLabVIEW. Custom steps must be written using LabVIEW 7.1.
How toActivate the Vision Builder AI License
When you run VisionBuilder AI for the first time, it prompts you to activate a license for theproduct. If you do not activate a valid license, Vision Builder AI runs inEvaluation Mode and continues to prompt you to activate a license on eachsubsequent launch. While Vision Builder AI is in Evaluation Mode, all featuresare available, except Migrate Inspection to LabVIEW. The duration of theevaluation period is 30 days, at the end of which you are required to activatethe Vision Builder AI license to continue using the product.
Complete the followingsteps to activate the Vision Builder AI license using an Internet connection.
· IMAQ PCI-1405
· IMAQ PCI/PXI-1407
· IMAQ PCI/PXI-1409
· IMAQ PCI-1410
· IMAQ PCI/PXI-1411
· IMAQ PCI/PXI-1422
· IMAQ PCI-1424
· IMAQ PCI-1426
· IMAQ PCI/PXI-1428
· IMAQ PCIe-1429
Note: This version of Vision Builder AI supports the NI PCI/PXI-8252 and the NIPCI-8254R IEEE 1394 host adaptor.
3) This version of Vision Builder AIsupports the following IMAQ I/O devices:
Note: If you want to use the NI CVS-1450 Series device or the NI PCI-8254Rdevice with Vision Builder AI, you need to install NI-IMAQ for IEEE 1394Cameras driver software version 2.0.1 or later after you install VisionBuilder AI 2.6.1. Also, when you install this driver software, you must selectthe NI CVS-1450 Series Support feature or the NI-IMAQ I/O feature available onthe Features screen of the installer.
4) In addition to IMAQ I/O devices,this version of Vision Builder AI also supports static digital I/O from anyNational Instruments device using NI DAQmx Global Channels. To support NIdigital output devices, Vision Builder AI requires NI-DAQmx driver softwareversion 7.1 or later.
5) Use MAX to create DAQmx GlobalChannels. For information about creating DAQmx Global Channels, refer to the Creatinga Global DAQ Channel topic in the NI Vision Builder for AutomatedInspection: Configuration Help.
6) To support digital I/O from bothIMAQ I/O devices and NI DAQ devices, this version of Vision Builder AI containsseparate digital I/O configuration and steps. Features available for NI CVS-1450 Series devices and NI PCI-8254Rdevices are prefixed with NI CVS/IMAQ IO, whereas features available forNI DAQ devices are prefixed with NI-DAQ.
7) To support serial communication,Vision Builder AI requires NI-VISA driver version 2.6.0 or later, which isincluded with Vision Builder AI. You can use serial ports built into your PC,your NI CVS-1450 Series device, or the following NI serial interfaces: PCI 232/x,PXI 8420/x, or PXI 8422/x.
Migration to LabVIEW
Vision Builder AI 2.6.1 can createLabVIEW VIs that implement the steps of your inspection diagram. This featurerequires LabVIEW 7.0 or later and IMAQ Vision 7.1 or later.
ActiveX Component forVision Builder AI
The following section includesdocumentation for additional objects, properties, and methods that areavailable from the Vision Builder AI ActiveX component but are not documentedin the NI Vision Builder for Automated Inspection: ActiveX ComponentReference Help.
UpdateMeasurementsOnRefresh Property(Read Only)
Syntax
DataType
Purpose
Remarks
Name Name of the measurement.
Unit Unit type of theNIVBAIStepMeasurement.Value.
Count Number of items in the collection.
TimeStamp Date and time the measurements were lastupdated internally.
Item Returns the specified object from thecollection.
Measurements Property
Syntax
DataType
Purpose
Known Issues
· Enabling EnableInspection Selection and specifying an Inspection to run on for aparticular Product Select Value overrides the Inspection youselected in the Startup tab. The NI CVS-1450 Series device launches the Inspectionyou select for the first Product Select Value in the InspectionSelection tab rather than the Inspection you selected in the Startuptab. Refer to the Setting Remote Target Options topic in the NIVision Builder for Automated Inspection: Configuration Help for moreinformation about these settings.
· If you areusing the Vision Builder AI ActiveX component from LabVIEW, you must useLabVIEW 7.1.
· When using theVision Builder AI ActiveX component, the NIVBAITargetMode setting isnot available. Therefore, the connection to a target always allows fullcontrol.
