Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI Lookout 6.7 Server Win32Eng NI Lookout服务器6.7版
Lookout服务器
Lookout Server支持基于Web的工业测量和自动化功能，大幅减少了开发工作量。
Lookout Server是一款应用软件，提供基于Web的功能，如多客户多服务器网络、Web监控和控制、OPC服务器和客户端、事件驱动处理、分布式日志记录和分布式报警。
Lookout客户端
Lookout Client可为要求苛刻的制造和过程控制应用提供直观的控制。
Lookout Client是基于Web的人机界面/监控和数据采集（HMI/SCADA）系统软件。它具有网络监测和控制以及分布式警报、事件和数据记录等功能。Lookout Client采用基于对象的架构，并支持事件驱动的处理。
Lookout6.7Server
文件大小: 582166898 字节 (555.20 MB)
修改日期: 2013-03-05 01:49
MD5: 91b1af7a9e2fbf62930425a21a629b17
SHA1: bbb926746e9e804bfc41ef67980ed382a50bb7eb
SHA256: 828c2910340a85ef3b95ce4cceac0b50e4fb9495d36b0bf0583e0717d467f0fc
CRC32: dddf0945
百度网盘和NI官方下载地址：
注册登陆视觉论坛账号，购买附件查看下载地址
NI Lookout 6.7 Server Win32Eng NI Lookout服务器6.7版
http://pcmv.cn/thread-28692-1-1.html?fromuid=9
(出处: 机器视觉论坛)
Lookout 6.7 Readme
January 2013
This file contains information about Lookout 6.7, including supported platforms, installation instructions, and a list of new features and changes.
Overview
System Requirements
Installation Instructions
Activation
Features and Changes
Upgrade Notes
Bug Fixes
Known Issues
Automating the Installation of NI Products
Overview
National Instruments Lookout is a human machine interface (HMI) and supervisory control and data acquisition (SCADA) software system for industrial automation. Lookout runs under Windows and communicates with field I/O through control hardware. Lookout can support the following applications:
System Requirements
Lookout supports the following operating systems:
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP SP3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Note: Lookout does not support Windows Me/2000/9x/NT or the Windows Server non-R2 editions.
Lookout has the following minimum system requirements:
A minimum of a Pentium III or later, or Celeron 866 MHz or equivalent PC processor. National Instruments recommends a Pentium 4/M or equivalent processor.
A minimum of 256 MB of RAM. National Instruments recommends 1 GB of RAM.
A minimum of 1 GB of free disk space, plus more to store the amount of historical data you intend to log to the Citadel storage system. National Instruments also recommends that you have 1.5 GB of free disk space for file swapping.
A minimum screen resolution of 800 x 600 pixels. National Instruments recommends a screen resolution of 1,024 x 768 pixels.
Internet Explorer 6 SP1 or later.
Note: The performance of Lookout depends on the number, size, and complexity of the processes you run. While the minimum requirements are sufficient for some processes, you might need to use more powerful computer configurations for complex and data-intensive applications.
If you want to use the networking capabilities of Lookout, you must have a network card installed on the computer and have the computer properly set up on a network with TCP/IP protocols. You also must be able to ping any computer on the network that you intend to have as a part of the Lookout network. To test if a computer is on the Lookout network, access a command prompt and enter the following command:
Ping compname
where compname is the name of the computer you want to ping.
If TCP/IP is working properly on the computer, you receive a response similar to the following example:
Pinging compname [123.45.67.89] with 32 bytes of data:
Reply from 123.45.67.89: bytes=32 time<10ms TTL=128
Reply from 123.45.67.89: bytes=32 time<10ms TTL=128
Reply from 123.45.67.89: bytes=32 time<10ms TTL=128
Reply from 123.45.67.89: bytes=32 time<10ms TTL=128
If TCP/IP is not working properly on the computer, consult the system administrator. Refer to the Lookout Help, available by selecting Start»All Programs»National Instruments»Lookoutx.x»Lookout Help, for more information about networking and network configuration with Lookout.
Installation Instructions
National Instruments recommends that you install Lookout 6.7 on a clean computer without previous versions of Lookout installed to obtain maximum stability. If you must install Lookout 6.7 and previous versions on the same computer, do not run multiple versions of Lookout at the same time.
Note: If you plan to use the networking capabilities of Lookout, verify that TCP/IP is working properly on all the computers you intend to use before you install Lookout.
Complete the following steps to install Lookout:
After completing the previous installation process, refer to the following additional installation considerations for the required Lookout components.
The Lookout software requires Microsoft SQL Server 2005 Express Edition (SQL Express). This component is installed by default when you install Lookout. During the installation process, the Lookout installer creates an instance of SQL Express named CITADEL. To prevent unauthorized access to SQL Express, the installer also generates a password for the SQL Express administrator sa. The default password is the computer ID. Complete the following steps to find the computer ID using NI License Manager.
The Lookout installer enables a mixed security mode on existing SQL Servers. If the target computer does not have an SQL Server installed, the Lookout installer installs SQL Express in the mixed security mode.
Use the following command line prompt to change the default password for the sa user:
Sqlcmd -S"localhostCITADEL" -U"sa" -P"COMPUTER_ID" -Q"sp_password 'COMPUTER_ID', 'NEW_PASSWORD', 'sa'"
If the mixed security mode is not acceptable, change both the SQL Express and Citadel login modes. You must set the registry DWORD values HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServerMSSQLServerLoginMode and HKEY_LOCAL_MACHINESOFTWARENational InstrumentsCitadel.0IntegratedSecurity to 1.
National Instruments recommends you to change the login mode immediately after you install Lookout. Otherwise, you must relink all existing Citadel databases. Restart the SQL Express and Citadel services in order for changes to take effect. If you use integrated NT security, you might need to configure the server machine and all clients explicitly.
Note: Lookout 6.0.2 and earlier use Microsoft SQL Server 2000 Desktop Engine (MSDE 2000), not SQL Express. If you upgrade Lookout 6.0.2 or earlier to Lookout 6.7, any existing databases continue to use MSDE 2000 for alarm logging, but new databases you create use SQL Express. If you detach an existing database from Lookout and then reattach the database, Lookout migrates the database to SQL Express.
You might want to uninstall MSDE 2000 after installing Lookout 6.7. Complete the following steps to uninstall MSDE 2000.
Exit Lookout if Lookout is running.
Open NI Measurement & Automation Explorer (MAX) and select My System»Historical Data»Citadel 5 Universe from the Configuration tree.
On the Databases page, detach all databases from the local computer.
Open the Windows Control Panel and uninstall MSDE 2000.
Restart the computer.
Open MAX and reattach all databases.
Activation
Lookout relies on licensing activation. You have a temporary license for a 7-day evaluation period. If you do not activate the Lookout license, Lookout runs in evaluation mode for a 7-day period. During the evaluation period, you can use only 50 I/O points and one client connection. When the evaluation period expires, you must activate a valid Lookout license to continue using Lookout. Activating Lookout includes activating the Lookout license and the Lookout Client Connection.
Activating the Lookout License
Use the serial number you received as part of the installation package. Activate the Lookout license in any of the following ways:
During installation, enter the serial number and run the NI Activation Wizard at the end of installation.
After you launch Lookout in evaluation mode, follow the steps in the NI Activation Wizard. If Lookout does not run this wizard, click the Activate Lookout button in the Lookout — Unlicensed Version dialog box to run this wizard.
Select Options»System while running Lookout in evaluation mode to display the System Options dialog box. Click the Activate Lookout button to run the NI Activation Wizard. The license activation does not take effect until you restart Lookout.
Select Start»All Programs»National Instruments»NI License Manager to launch NI License Manager. The license activation does not take effect until you restart Lookout.
Note: If the activation fails, Lookout remains in evaluation mode until the 7-day evaluation period expires. If you activate Lookout by using a Development/Runtime Server license or a Runtime Only Server license, NI License Manager activates the NI OPC Servers automatically. If you activate Lookout by using a Lookout Integrator license, NI License Manager does not activate the NI OPC Servers with Lookout.
Activating the Lookout Client Connection
Activate the Lookout Client Connection in either of the following ways:
Select Start»All Programs»National Instruments»NI License Manager to launch NI License Manager. The license activation does not take effect until you restart Lookout.
In Lookout, select Options»System to display the System Options dialog box. Click the Activate Client Connection button to run the NI Activation Wizard. The activation does not take effect until you restart Lookout.
Note: If you do not activate the Lookout Client Connection, you cannot connect to Lookout on the local computer through Lookout clients on other computers on the same network.
Features and Changes
Lookout 6.7 incorporates the following new features and changes:
Providing a Panel Navigator
Lookout provides a panel navigator. You can switch and organize panels to enhance the user interface by using this panel navigator. Display the panel navigator by selecting View»Show Navigator from the menu bar.
Improving Object Usability
Lookout improves the usability for multiple objects in the following ways:
Support binding connections to the parameters of Pot, Pushbutton, TextEntry, and Panel;
Support resizing Pot and Switch;
Support justifying TextEntry vertically.
Providing File Functions
Lookout provides two more file functions:
FILEEXISTS file function enables you to avoid creating duplicate file names. Use this function to check whether a file exists.
DIREXISTS file function enables you to avoid saving files to non-existent directories. Use this function to check whether a directory exists.
Upgrade NotesUpgrade from Lookout 6.6
NI OPC Servers is upgraded from 2011 to 2012. In Lookout 6.7, if you want to use NI OPC Servers 2012 to run applications built in NI OPC Servers 2011, you do not need to complete any extra steps.
Upgrade from Lookout 6.5 or earlier
Complete the following steps to use NI OPC Servers 2012 to run applications built in NI OPC Servers 2010 or earlier:
Launch NI OPC Servers Configuration by selecting Start»All Programs»National Instruments»NI OPC Servers 2012»NI OPC Servers Configuration. Select File»Open from the menu bar to open the NI OPC Servers project file (.opt) built in NI OPC Servers 2010 or earlier.
In Lookout 6.7, select File»Open from the menu bar to open the Lookout source code file (.lks) compiled by Lookout 6.5 or earlier.
Switch to edit mode and select Object»Object Explorer.
In the Object Explorer dialog box that appears, expand your process tree and show your OPC client objects. Right-click the OPC client object you want to use and select Properties from the shortcut menu.
In the Revise OPC Client dialog box that appears, switch to National Instruments.NIOPCServers.V5 from the Server Name pull-down menu.
Click OK.
Tip: National Instruments recommends that you save the Lookout process file (.l4p) after completing the previous steps for easier access later. If you do not save this file, you need to complete the previous steps again the next time.
Refer to the NI OPC Servers Help, available by selecting Start»All Programs»National Instruments»NI OPC Servers 2012»NI OPC Servers Help, for more information about using the NI OPC Servers application.
Upgrade from Lookout 5.x or earlier
Refer to the National Instruments website at ni.com/info and enter the Info Code exd569 for information about upgrading Lookout from the earlier versions.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in Lookout.
Bug Fixes
The following table contains the IDs and issues of a subset of fixed bugs in Lookout 6.7. This table is not an exhaustive list of fixed bugs in Lookout 6.7. If you have a CAR ID, you can search this list to validate the bug that has been fixed.
| ID | Fixed Issue |
310324 | Logon window does not show when Lookout launches at the first time. |
335417 | ABS function has problems after compiling the source file. |
343252 | Lookout crashes at launch with incorrect path in lookout.ini. |
366184 | Lookout hangs when loading certain process. |
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Copyright
© 1996-2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
LabVIEW, Lookout, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
