石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-845x Driver Software 1.0 Win32Eng NI-845x驱动软件1.0

文章来源:石鑫华视觉网时间:2022-06-15 17:58:31 点击:200

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-845x Driver Software 1.0  Win32Eng NI-845x驱动软件1.0

NI-845x Driver Software
NI-845x支持I2C/SPI接口设备。
NI-845x是一个驱动程序软件，用于对消费电子产品和集成电路的内部集成电路(I2C)、SCSI并行接口(SPI)或SMBus通信进行配置、编程和故障排除。NI-845x还提供一个通用数字I/O API，适用于各种应用，比如I2C设备的地址配置、LED切换或选通转换以及模拟转换器芯片常见的数据收发线等。

1.0
文件大小: 104598976 字节 (99.75 MB)
修改日期: 2010-04-25 04:23
MD5: c14f2ddda1043c5691693188ebcb5f56
SHA1: 11235d215412dcce88e7931b605f43e1abf2ee6c
SHA256: cce229002752e0a027f944828a7978dbe8cdf6e47dbc4f832f1a0ec87c8d16fc
CRC32: 36c095da

百度网盘与NI官方下载地址：

NI-845x Driver Software 1.0  Win32Eng NI-845x驱动软件1.0

http://pcmv.cn/thread-28006-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI-845x Software

Version 1.0
© 2005 National Instruments Corporation, All Rights Reserved.


Thank you for using National Instruments products.


Information in this file is organized in the following sections:

  • Installation

  • Documentation

  • Supported Hardware

  • Supported Development Environments

Installation

Before installing the NI-845x Software, log on as Administrator or as a user with Administrator privileges. The NI-845x software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-845x software.

  • Insert the NI-845x Software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-845x Software CD.

  • The installation wizard guides you through the necessary steps to install the NI-845x software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.

  • When installation is complete, click Finish.


Documentation

The NI-845x Software User Manual is the primary document. The manual includes an overview of the I2C and SPI buses as well as detailed information on the API.
The NI-845x Software User Manual is provided in Adobe Acrobat Portable Document Format (PDF). You can download the Acrobat Reader for free at: www.adobe.com.
Open the manual from your Start menu in:
Start » Programs » National Instruments » NI-845x

Supported Hardware

  • National Instruments USB-8451 I2C, SPI Interface


Additional documentation for your NI-845x interface is on your CD or in the NI-845xDocumentation folder on your hard drive.


Supported Development Environments

The NI-845x software supports the following development environments:
·        LabVIEW 7.0, 7.1, and 8.0


首页
84162741QQ
联系