Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW Electric Motor Simulation Toolkit 2017 Win32Eng LabVIEW电动机仿真工具包NIEMsim2017
LabVIEW电动机仿真工具包提供了开发桌面和硬件在环电动机系统仿真模型所需的建模元件。
LabVIEW电机仿真工具包是LabVIEW和VeriStand的软件附件。它为电子仿真、控制和硬件在环(HIL)提供了LabVIEW项目模板，以及适用于各种电机类型的VeriStand软件附件。该工具包可帮助您在主机上执行模型，以进行桌面仿真、LabVIEW实时仿真和基于FPGA的仿真。电动机仿真工具包包括开关磁阻电动机(SRM)、应电机和永磁同步电机模型，这些模型可以是近乎线性的简单模型也可以是更高保真度的模型。
NIEMsim2017
发布日期
2018/8/10
包含的版本
2017完整版
受支持的操作系统
Windows 7 (SP1) 64-bit
Windows 10
Windows Server 2008 R2 64-bit
Windows Server 2012 R2 64-bit
Windows 7 (SP1) 32-bit
Windows 8.1
应用程序位数
32位
语言
英文
校验和
文件大小: 462731819 字节 (441.30 MB)
修改日期: 2020-01-10 23:53
MD5: 297d6a28fb7a97e0e78a4c9e5322501a
SHA1: 5d3c61b02dbd6a3f3e454d74bc4e8947d4971056
SHA256: 133a5d10db6c5ac43b75dc8e43cc90ec0d508e6435c6512da35dc4f5131c70fa
CRC32: 3b258fe1
百度网盘和NI官方下载地址：
LabVIEW Electric Motor Simulation Toolkit 2017 Win32Eng LabVIEW电动机仿真工具包NIEMsim2017
http://pcmv.cn/thread-27599-1-1.html?fromuid=9
(出处: 机器视觉论坛)
NI Electric Motor Simulation Toolkit 2017 Readme
August 2018
This file contains important information about the NI Electric Motor Simulation Toolkit, including installation instructions, recommended hardware, activation instructions, and known issues.
Overview
System Requirements
Supported Operating Systems
Installation Instructions
Product Security and Critical Updates
Activating the Software
Recommended Hardware
Known Issues
Accessing the Help
Finding Examples
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
Overview
The Electric Motor Simulation Toolkit is an add-on for both the LabVIEW platform and NI VeriStand. This toolkit provides LabVIEW VIs and sample projects to help you control and simulate an electric motor by writing your own applications. This toolkit also extends the functionality of VeriStand by providing a series of custom devices for you to design and implement a real-time motor simulation application. This toolkit uses field-programmable gate array (FPGA) technology and integrates the finite element analysis (FEA) method to provide high-speed and high-fidelity electric motor simulation.
This toolkit provides built-in examples of JMAG RTT files and ANSYS motor model files for motor simulation. You can use the RTT files or the ANSYS motor model files with the examples, sample projects, or custom devices. To configure the controller and simulator and use the built-in RTT files or ANSYS motor model files, refer to the NI website for more information.
System Requirements
In addition to the system requirements for the LabVIEW Development System, the Electric Motor Simulation Toolkit has the following requirements for LabVIEW support:
LabVIEW 2017 Full or Professional Development System (32-bit)
LabVIEW 2017 Real-Time Module
LabVIEW 2017 FPGA Module
LabVIEW 2017 Control Design and Simulation Module
FlexRIO Support 17.0
NI CompactRIO Device Drivers May 2017
NI R Series Multifunction RIO Device Drivers May 2017
At least 256 MB of disk space
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2017.
For VeriStand support, the Electric Motor Simulation Toolkit has the following requirements:
VeriStand 2017
FlexRIO Support 17.0
NI CompactRIO Device Drivers May 2017
NI R Series Multifunction RIO Device Drivers May 2017
At least 256 MB of disk space
Refer to the NI VeriStand Readme for additional system requirements and supported operating systems for VeriStand 2017.
Installation Instructions
Double-click the setup.exe file in the root directory of the Electric Motor Simulation Toolkit installer and follow the instructions on the screen to install this product.
Supported Operating Systems
The Electric Motor Simulation Toolkit supports the following operating systems:
Windows 10/8.11/7 SP1[sup]2[/sup]
Windows Embedded Standard 7 SP1[sup]2[/sup]
Windows Server 2012 R21
Windows Server 2008 R2 SP12
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note In 2016 the Electric Motor Simulation Toolkit dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. The LabVIEW 2017 Electric Motor Simulation Toolkit will not install or run on an unsupported OS. You cannot deploy or distribute applications that use the LabVIEW 2017 Electric Motor Simulation Toolkit to an unsupported OS. Additionally, after installing the LabVIEW 2017 Electric Motor Simulation Toolkit, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to KB 79UC78LS, Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
Activating the Software
For LabVIEW support, you evaluate and activate the Electric Motor Simulation Toolkit the same as activating LabVIEW. Refer to the LabVIEW Help for more information about activating your software.
For VeriStand support, complete the following steps to activate the Electric Motor Simulation Toolkit:
Launch NI License Manager by selecting Start»All Programs»National Instruments»NI License Manager or from NI Launcher in Windows 8.x.
In the NI License Manager tree, navigate to the Electric Motor Simulation Toolkit in the Local Licenses»LabVIEW 2017»Toolkits folder.
Double-click the toolkit name or right-click the toolkit and select Activate from the shortcut menu.
In the NI Activation Wizard that appears, select Apply one or more 20-character activation codes previously acquired for this computer and click the Next button.
Enter the activation code and click the Next button. The activation code is the serial number on the product packing slip or on the shipping label.
Check the activation status of this toolkit in the NI License Manager.
Note If you installed the Electric Motor Simulation Toolkit with a serial number, the Activation Wizard launches after the installation is complete. You can complete step 4-6 to activate the toolkit.
Recommended Hardware
NI recommends the following hardware for you to use with this toolkit.
| Model | Simulating on RT | Simulating on FPGA |
| ACIM Constant Parameter Model | NI PXIe-8135 RT | NI PXI-7854R/7868R |
| PMSM Constant Parameter Model | NI PXIe-8135 RT | NI PXI-7854R/7868R |
| PMSM Variable Parameter Model | NI PXIe-8135 RT | NI PXI-7854R/7868R |
| PMSM FEA Model | NI PXIe-8135 RT | NI PXIe-7966R + HKS-9609 by Keisokugiken Corporation (KGC)| Note You can use NI PXIe-7965R for simulating on an FPGA target. However, when you compile the FPGA code, you must set the frequency of Top-Level Clock on the FPGA target to 80 MHz or less. Otherwise, LabVIEW fails to compile the FPGA bitfile. |
|
| SRM Linear Model | NI PXIe-8135 RT | NI PXI-7854R/7868R |
| SRM FEA Model | NI PXIe-8135 RT | NI PXIe-7965R/7966R + HKS-9609 by Keisokugiken Corporation (KGC) |
Known Issues
You can access the software and documentation known issues list online. Refer to the NI website for an up-to-date list of known issues in the Electric Motor Simulation Toolkit.
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Electric Motor Simulation Toolkit. You can find help information about this toolkit in the Toolkits»Electric Motor Simulation Toolkit book on the Contents tab.
Refer to the NI VeriStand Help, accessible by selecting Help»Search the NI VeriStand Help from VeriStand, for information about the Electric Motor Simulation custom devices.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. Navigate to the Toolkits and Modules»Electric Motor Simulation folder to access the examples. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
You also can find examples for the Electric Motor Simulation Toolkit in the labviewexamplesElectric Motor Simulation directory.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 2013–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
375059D-01
