下载中心

LabVIEW myRIO Toolkit 2013 Win32Eng LabVIEW 2013myRIO工具包

文章来源:石鑫华视觉网时间:2022-06-14 15:58:47 点击:253

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW myRIO Toolkit 2013 Win32Eng LabVIEW 2013myRIO工具包

LabVIEW myRIO工具包提供了在myRIO学生嵌入式设备上开发和部署应用程序所需的工具。
LabVIEW myRIO工具包是LabVIEW的软件附件，提供了在myRIO学生嵌入式设备上快速开发和部署应用程序所需的驱动和工具。该工具包为myRIO设备上的每种I/O类型提供了基于配置的Express和Advanced I/O VI，可帮助学生快速构建想法并编写独立的应用程序。

2013myRIO
发布日期
2013/8/2
包含的版本
2013完整版
受支持的操作系统
Windows
Windows XP (SP3) 32-bit
Windows 8 32-bit
Windows 8 64-bit
Windows 7 64-bit
Windows 7 32-bit
应用程序位数
32位
语言
英文
校验和
文件大小: 1701031444 字节 (1.58 GB)
修改日期: 2019-06-25 02:58
MD5: 230970d66448af60e4d2998c09a688f3（官方正确）
SHA1: 12af305310a611048edb94e9017107c1c005f5cc
SHA256: e8c53c20b8562766b7a810c3da81f3195128cd1ce193bface52f083fb37133a2
CRC32: d4c81253

百度网盘与NI官方下载地址：

http://pcmv.cn/thread-27585-1-1.html?fromuid=9

(出处: 机器视觉论坛)

LabVIEW 2013 for myRIO Module Readme

Version 1.0

June 2013

This file contains important information about the LabVIEW 2013 for myRIO Module, including system requirements, installation instructions, and known issues.

Overview

System Requirements

Installation Instructions

Known Issues

Accessing the Help

Finding Examples

Automating the Installation of NI Products

How to Use NI Software with Microsoft Windows 8

NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003

Overview

The LabVIEW for myRIO Module is a software package that allows you to develop NI myRIO applications by using LabVIEW.

System Requirements

In addition to the system requirements for the LabVIEW Development System, the myRIO Module has the following requirements:

LabVIEW 2013 Student, Full, or Professional Development System (32-bit)
LabVIEW 2013 Real-Time Module
At least 2 GB of disk space in addition to the LabVIEW-recommended minimum.
One of the following operating systems for application development:

Windows 8
Windows 7
Windows Vista
Windows XP Pro (Service Pack 3)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)

Note:

The myRIO Module is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
You might need more memory than the LabVIEW-recommended minimum depending on the size of the application you design in LabVIEW on the host computer.
Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). Refer to the National Instruments website for information about how this might affect your use of Windows Server 2003 R2 and what actions you might have to take.
The myRIO Module does not support the Windows Server non-R2 editions.

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2013.

Installation Instructions

Complete the following steps to install the LabVIEW for myRIO Module on a development computer.

Log in to the development computer as an administrator or as a user with administrative privileges.
Insert the NI myRIO Software Suite DVD 1.
Follow the instructions on the screen to install and activate the myRIO Module.

Installing the USBLAN Driver in Microsoft Windows XP and Windows Server 2003

You must manually install the USBLAN driver before using the NI myRIO with Microsoft Windows XP and Windows Server 2003. Complete the following steps to install the USBLAN driver:

Note Before completing the following steps, make sure that you have downloaded and installed the KB 931125 package from Microsoft. For more information, refer to the Workarounds and Recommendations section of KB 65O8AH55, Why Are National Instruments Installers Failing on Windows XP and Server 2003 Machines?.

Connect the NI myRIO to your computer after you install the LabVIEW for myRIO Module.
In the Found New Hardware Wizard, select No, not this time and click Next.
Select Install from a list or specific location and click Next.
Select Include this location in the search and navigate to the National InstrumentsCompactRIOStagingUSBLANXP directory.
Click Next to install the USBLAN driver. Click Continue Anyway when you see the Windows Logo testing warning.
Click Finish.

The USBLAN device driver should now appear under Network adapters in the Windows Device Manager.

myRIO Module Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the myRIO Module.

Accessing the Help

Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the myRIO Module.

Finding Examples

Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the myRIO Module are located in the labviewexamplesmyRIO directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information, refer to the following KnowledgeBase articles:

For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8 Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8 Desktop	Start screen	Right-click application and select Pin to Start
Windows 8 Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.

For more information about NI support for Windows 8, visit ni.com/windows8.

NI LabVIEW for myRIO Module Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments LabVIEW for myRIO Module will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the myRIO Module that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

LabVIEW myRIO Toolkit 2013 Win32Eng LabVIEW 2013myRIO工具包