石鑫华视觉 手机微信QQ:13450001061

下载中心

NI-SWITCH 3.8 Win32/64Eng/Jpn NI开关产品驱动程序3.8下载

文章来源:石鑫华视觉网时间:2022-06-13 15:33:50 点击:276

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-SWITCH 3.8 Win32/64Eng/Jpn NI开关产品驱动程序3.8下载

NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng/Jpn
3.8
文件大小: 941105162 字节 (897.51 MB)
修改日期: 2011-06-13 23:15
MD5: 970a51c158d31b8808c69dbbcd6526ee（官方正确）
SHA1: ec9c2796154fbb572f91abf3af0c4d01907db2ec
SHA256: 345d775c9c9ccf765f7d450b6dc4ee8fdf7a3071e3d712c4c4d833d8d7a2f0cc
CRC32: eba39f54

百度网盘与NI官方下载地址：

NI-SWITCH 3.8 Win32/64Eng/Jpn NI开关产品驱动程序3.8下载

http://pcmv.cn/thread-27391-1-1.html?fromuid=9

(出处: 机器视觉论坛)



NI-SWITCH Readme File

Version 3.8
Thank you for using NI-SWITCH for Windows Vista/XP/2000.
This file contains important information about NI-SWITCH and is organized into the following sections:

  • New Features in Version 3.8

  • Supported Hardware

  • System Requirements

  • Installed File Names and Locations

    • Software

    • Documentation

    • Examples

  • Uninstalling/Modifying NI-SWITCH

  • Obsolete VIs and Functions

  • Known Issues

  • Changes by Release

New Features in Version 3.8

  • Japanese localization for driver, LabVIEW application programming interface (API), and documentation.

Supported Hardware

NI-SWITCH 3.8 and later supports the following switch modules:

  • NI PXI-2501

  • NI PXI-2503

  • NI PXI-2527

  • NI PXI-2529

  • NI PXI-2530

  • NI PXI-2532

  • NI PXI-2533

  • NI PXI-2534

  • NI PXI-2535

  • NI PXI-2536

  • NI PXI-2545

  • NI PXI-2546

  • NI PXI-2547

  • NI PXI-2548

  • NI PXI-2549

  • NI PXI-2554

  • NI PXI-2555

  • NI PXI-2556

  • NI PXI-2557

  • NI PXI-2558

  • NI PXI-2559

  • NI PXI-2564

  • NI PXI-2565

  • NI PXI-2566

  • NI PXI-2567

  • NI PXI-2568

  • NI PXI-2569

  • NI PXI-2570

  • NI PXI-2575

  • NI PXI-2576

  • NI PXI-2584

  • NI PXI-2585

  • NI PXI-2586

  • NI PXI-2590

  • NI PXI-2591

  • NI PXI-2593

  • NI PXI-2594

  • NI PXI-2595

  • NI PXI-2596

  • NI PXI-2597

  • NI PXI-2598

  • NI PXI-2599

  • NI SCXI-1127

  • NI SCXI-1128

  • NI SCXI-1129

  • NI SCXI-1130

  • NI SCXI-1160

  • NI SCXI-1161

  • NI SCXI-1163R

  • NI SCXI-1166

  • NI SCXI-1167

  • NI SCXI-1169

  • NI SCXI-1175

  • NI SCXI-1190

  • NI SCXI-1191

  • NI SCXI-1192

  • NI SCXI-1193

  • NI SCXI-1194

  • NI SCXI-1195

NOTES:  NI-SWITCH does not support legacy resource descriptors (SCXI:: and PXI::) under Windows Vista.

NI-SWITCH supports the NI USB-1359 under Windows 2000, Windows XP, and the 32-bit version of Windows Vista. NI-SWITCH does not support the NI USB-1359 under the 64-bit version of Windows Vista.

If you are using a PXI product, notice that MXI-4 is supported under Windows Vista/XP/2000, but MXI-3 is supported under only Windows XP/2000.

System Requirements

NI-SWITCH 3.8 and NI-DAQmx 8.8 support Windows Vista/XP/2000. It is recommended that you have the most recent service pack for your operating system installed. Earlier versions of NI-SWITCH/NI-DAQ support other operating systems. To find and download an earlier version of a driver that supports other operating systems, refer to ni.com/downloads.

Minimum System

  • Processor—Pentium 200 MHz or equivalent

  • RAM—64 MB

  • A screen resolution of 800×600 with 256 colors

  • Windows XP/2000, with all available critical updates and service packs

Recommended System

  • Processor—Pentium III/Celeron 600 MHz or equivalent

  • RAM—256 MB

  • A screen resolution of 1024×768

  • Windows Vista/XP/2000, with all available critical updates and service packs

Application Development Environments (ADEs)

  • LabVIEW 7.1, 8.2, 8.5, and 8.6

  • LabVIEW Real-Time Module 7.1.1, 8.2, 8.5, and 8.6

  • LabWindows™/CVI™ 7.1, 8.0, 8.1, and 8.5

  • Microsoft Visual C++ (MSVC) 6.0 or later

  • Microsoft Visual Basic 6.0

Installed File Names and LocationsSoftware

  • National Instruments file folder location, <NIDocDir>:

    • Windows 2000/XP: Documents and SettingsAll UsersShared DocumentsNational Instruments

    • Windows Vista: UsersPublicDocumentsNational Instruments

  • National Instruments file folder location, <NIIVIPath>:

    • Windows 2000/XP/Vista 32-bit: Program FilesIVI FoundationIVI

    • Windows Vista 64-bit: Program Files (x86)IVI FoundationIVI

[tr][/tr]

NOTES:$(NIIVIPath) is configured as an environment variable on the target system.

If you upgraded an installation of IVI, your files may be located in the following location:

  • Windows 2000/XP/Vista 32-bit: Program FilesIVI

  • Windows Vista 64-bit: Program Files (x86)IVI

ItemInstalled Location on Windows XP/2000
and Windows Vista
NI-SWITCH<NIIVIPath>Drivers iSwitch
NI-SWITCH Function Panel<NIIVIPath>Drivers iSwitch iSwitch.fp
NI-SWITCH Examples<NIDocDir> iSwitchExamples
NI-SWITCH Header files<NIIVIPath>Include
NI-SWITCH Import Library files<NIIVIPath>Lib
NI-SWITCH DLL<NIIVIPath>Bin

Documentation

Documentation is available at Start»All Programs»National Instruments»NI-SWITCH»Documentation. The documentation set is composed of the following documents:

  • NI-SWITCH Readme File

  • Read Me First: Safety and Electromagnetic Compatibility

Printed format. Includes safety instructions and information about the radio-frequency interference characteristics of the hardware it accompanies.

  • NI Switches Getting Started Guide

Printed and PDF format. Includes hardware and software installation, MAX configuration, and signal connection information.

  • NI Switches Help

HTML help format. Includes switching fundamentals, device specific information, programming information, tutorials, a LabVIEW VI reference, and LabWindows/CVI, C++, and Visual Basic function references.

  • NI Switch Specifications

Printed and PDF format. Lists specifications for each NI switch module.

  • NI Switch Accessory Installation Instructions (Optional)

Printed and PDF format. Lists NI switch module accessory installation information.

Examples

Refer to Start»All Programs»National Instrument»NI-SWITCH»Examples for the examples for the supported ADEs. The examples cover immediate operations, synchronous scanning, handshaking, and software triggering. A complete example list is available in the NI Switches Help.
Refer to the Installed File Names and Locations section for the installed locations of the example sets.

Uninstalling/Modifying NI-SWITCH

For Windows 2000/XP, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Add/Remove Programs.

  • Select National Instruments Software.

  • Click Change/Remove.

  • Select NI-SWITCH 3.x from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

For Windows Vista, complete the following steps:

  • Launch the Control Panel by selecting Start»Control Panel.

  • Double-click Programs and Features.

  • Select National Instruments Software.

  • Click the Uninstall/Change button.

  • Select NI-SWITCH 3.x from the dialog box that appears.

  • Click Remove to uninstall the product; click Modify to change the components that are installed.

Obsolete VIs and Functions

  • Easy niSwitch CIN VI/function

  • Easy niSwitch Close VI/function

  • Easy niSwitch Open VI/function

  • niSwitch Can Connect Channels? VI

  • niSwitch Connect and Wait VI/function

  • niSwitch Control a Single Switch VI/function

  • niSwitch Disconnect and Wait VI/function

  • niSwitch EasyIO Connect VI/function

  • niSwitch EasyIO Disconnect VI/function

  • niSwitch EasyIO Reset VI/function

  • niSwitch EasyIO Scan VI/function

  • niSwitch EasyIO Scanning Acquisition VI/function

  • niSwitch Error-Query VI/function

  • niSwitch Get Error Info VI/function

  • niSwitch Is Debounced? VI

  • niSwitch Is Scanning? VI

  • niSwitch Query a Single Switch VI/function

  • niSwitch Read Calibration Data VI/function

  • niSwitch Scan VI/function

  • niSwitch Scanning Acquisition VI/function

  • niSwitch Write Calibration Data VI/function

NOTE:  The niSwitch Can Connect Channels?, niSwitch Is Debounced?, and niSwitch Is Scanning? VIs were replaced by identical VIs without question marks in the name.

Known Issues

The following are known issues for NI-SWITCH 3.8:

  • Various support files, such as .h and .lib files, are installed in Program FilesIVI and VXIpnp directories to support ADEs that only recognize the VXIpnp directory.

  • SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH returns an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.

  • There are known DLL collision issues with the Microsoft Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ (Legacy). A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:

    \HKEY_LOCAL_MACHINESOFTWARENational InstrumentsNI-PALCurrentVersionpalConfigMemory
    sharedFixedAddress

    where the value is a DWORD (0x44000000 generally works). For the change to take effect, you must close and restart all applications after adding the registry key.

  • NI-DMM 2.2

    • NI-DMM 2.2 updated the niSwitch DMM Switch Handshaking example for LabVIEW. If you have an earlier version of NI-DMM installed, the VI is inoperable. To use the example with NI-DMM 2.1.2 or earlier, delete the AUX Trig 1 case from the case structure connected to Sample Trigger Source in the niDMM Configure Multi Point VI.

    • NI-DMM 2.2 introduces a new enumerated value, AUX Trig 1.

  • When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.

  • NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI-SWITCH operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.

  • LabWindows/CVI

    The links in the function panel help in LabWindows/CVI versions 7.1 and 7.1.1 will not work unless you have downloaded the most recent version of the launchhelp.js file. Instructions for downloading and installing the file can be found in the KnowledgeBase entry Why Do I Get "Object Expected" Error When Opening Links in Function Panel Help? You can locate this KB by going to ni.com/info and entering rdnkbe in the Info Code field.

  • Reverting to NI-SWITCH 1.6 after installing NI-SWITCH 3.8

If reverting back to NI-SWITCH 1.6 from NI-SWITCH 3.8, you must uninstall NI-SWITCH 3.8 and reinstall NI-SWITCH 1.6.

Changes by Release3.8 from 3.7.2

  • Japanese localization for driver, LabVIEW application programming interface (API), and documentation.

  • New behavior: Error and self test message strings now return localized values in LabVIEW. User applications that check the value of these strings (or trap errors by comparing the error cluster) might experience a change in behavior.

3.7.2 from 3.7.1

  • Added support for LabVIEW 8.6

  • Removed support for LabVIEW 8.0

3.7.1 from 3.6.2

  • Added support for the NI PXI-2533/2534 switch modules

Copyright
© 1998–2008 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Patents
For patents covering the National Instruments products, refer to the appropriate location: Help» Patents in your software, the patents.txt file on your CD, or ni.com/patents.


首页
84162741QQ
联系