Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-SWITCH 3.6 Win32/64Eng NI开关产品驱动程序3.6下载

NI-SWITCH
NI-SWITCH为使用NI开关产品的客户提供支持。
NI-SWITCH是用于控制和配置NI开关的NI仪器驱动程序。NI-SWITCH一种兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供了一系列操作和属性，可以执行波形或信号发生器的功能，并包含了交互式软件前面板和示例。

Win32/64Eng
3.6
文件大小: 782021761 字节 (745.79 MB)
修改日期: 2007-08-23 23:31
MD5: f5090528b3232e8c49118fdf66a7dfa6（官方正确）
SHA1: d93da39d6ba50943e6e9b2ce6e3b10d932567613
SHA256: 424dccaf89de9991c97bf280832fae85b1c51a868412b754368ca1a0f6364825
CRC32: 97095c65

百度网盘与NI官方下载地址：

NI-SWITCH 3.6 Win32/64Eng NI开关产品驱动程序3.6下载

http://pcmv.cn/thread-27388-1-1.html?fromuid=9

(出处: 机器视觉论坛)

NI-SWITCH Readme File

• New Features in Version 3.6

• Supported Hardware

• System Requirements

• Installed File Names and Locations
  

• Software

• Documentation

• Examples
  

• Uninstalling/Modifying NI-SWITCH

• Obsolete VIs and Functions

• Fixed Issues

• Known Issues

• Changes by Release
  

New Features in Version 3.6

• Support for LabVIEW 8.5
  

Supported Hardware

• NI PXI-2501

• NI PXI-2503

• NI PXI-2527

• NI PXI-2529

• NI PXI-2530

• NI PXI-2532

• NI PXI-2545

• NI PXI-2546

• NI PXI-2547

• NI PXI-2548

• NI PXI-2549

• NI PXI-2554

• NI PXI-2555

• NI PXI-2556

• NI PXI-2557

• NI PXI-2558

• NI PXI-2559

• NI PXI-2564

• NI PXI-2565

• NI PXI-2566

• NI PXI-2567

• NI PXI-2568

• NI PXI-2569

• NI PXI-2570

• NI PXI-2575

• NI PXI-2576

• NI PXI-2584

• NI PXI-2585

• NI PXI-2586

• NI PXI-2590

• NI PXI-2591

• NI PXI-2593

• NI PXI-2594

• NI PXI-2595

• NI PXI-2596

• NI PXI-2597

• NI PXI-2598

• NI PXI-2599

• NI SCXI-1127

• NI SCXI-1128

• NI SCXI-1129

• NI SCXI-1130

• NI SCXI-1160

• NI SCXI-1161

• NI SCXI-1163R

• NI SCXI-1166

• NI SCXI-1167

• NI SCXI-1169

• NI SCXI-1175

• NI SCXI-1190

• NI SCXI-1191

• NI SCXI-1192

• NI SCXI-1193

• NI SCXI-1194

• NI SCXI-1195
  

System Requirements

Minimum System

• Processor—Pentium 200 MHz or equivalent

• RAM—64 MB

• A screen resolution of 800×600 with 256 colors

• Windows XP/2000, with all available critical updates and service packs
  

Recommended System

• Processor—Pentium III/Celeron 600 MHz or equivalent

• RAM—256 MB

• A screen resolution of 1024×768

• Windows Vista/XP/2000, with all available critical updates and service packs
  

Application Development Environments (ADEs)

• LabVIEW 7.1, 8.0, 8.2, and 8.5

• LabVIEW Real-Time Module 7.1.1, 8.0, 8.2, and 8.5

• LabWindows™/CVI™ 7.0, 8.0, and 8.1

• Microsoft Visual C++ (MSVC) 6.0 or later

• Microsoft Visual Basic 6.0
  

Installed File Names and LocationsSoftware

Documentation

• NI-SWITCH Readme File
  

• Readme First: Safety and Radio-Frequency Interference
  

• NI Switches Getting Started Guide
  

• NI Switches Help
  

• NI-SWITCH Instrument Driver Quick Reference Guide
  

• Switch Soft Front Panel Help
  

• NI Switch Specifications
  

• NI Switch Accessory Installation Instructions (Optional)
  

Examples

Uninstalling/Modifying NI-SWITCH

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Add/Remove Programs.

• Select National Instruments Software.

• Click Change/Remove.

• Select NI-SWITCH 3.x from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

• Launch the Control Panel by selecting Start»Control Panel.

• Double-click Programs and Features.

• Select National Instruments Software.

• Click the Uninstall/Change button.

• Select NI-SWITCH 3.x from the dialog box that appears.

• Click Remove to uninstall the product; click Modify to change the components that are installed.
  

Obsolete VIs and Functions

• Easy niSwitch CIN VI/function

• Easy niSwitch Close VI/function

• Easy niSwitch Open VI/function

• niSwitch Connect and Wait VI/function

• niSwitch Control a Single Switch VI/function

• niSwitch Disconnect and Wait VI/function

• niSwitch EasyIO Connect VI/function

• niSwitch EasyIO Disconnect VI/function

• niSwitch EasyIO Reset VI/function

• niSwitch EasyIO Scan VI/function

• niSwitch EasyIO Scanning Acquisition VI/function

• niSwitch Query a Single Switch VI/function

• niSwitch Scan VI/function

• niSwitch Scanning Acquisition VI/function

• niSwitch Error-Query VI/function

• niSwitch Get Error Info VI/function

• niSwitch Write Calibration Data VI/function

• niSwitch Read Calibration Data VI/function
  

Fixed Issues

Known Issues

• Reverting to NI-SWITCH 1.6 after installing NI-SWITCH 3.6
  

• Various support files, such as .h and .lib files, are installed in Program FilesIVI and VXIpnp directories to support ADEs that only recognize the VXIpnp directory.
  

• SCXI-1127 (Rev D and earlier) continuously drives the TTL1 trigger line on the SCXI backplane. This does not allow bus sharing of TTL1 with other SCXI modules. NI-SWITCH returns an error if an SCXI-1127 is in the chassis and if TTL1 is being used for scanning. If using the NI-DAQmx driver for your SCXI system, you get a resource reservation error if you try to perform a switching or signal conditioning operation that requires use of TTL1.
  

• There are known DLL collision issues with the Microsoft Visual Basic debugger and a National Instruments device driver using Traditional NI-DAQ (Legacy). A support DLL used by NI-SWITCH fails to load if Visual Basic has already loaded another DLL into the same address space. To change the default address that is used to load the driver DLL, create the following registry key:
  
  \HKEY_LOCAL_MACHINESOFTWARENational InstrumentsNI-PALCurrentVersionpalConfigMemory
  sharedFixedAddress
  
  where the value is a DWORD (0x44000000 generally works). For the change to take effect, you must close and restart all applications after adding the registry key.
  

• NI-DMM 2.2
  
  

• NI-DMM 2.2 updated the niSwitch DMM Switch Handshaking example for LabVIEW. If you have an earlier version of NI-DMM installed, the VI is inoperable. To use the example with NI-DMM 2.1.2 or earlier, delete the AUX Trig 1 case from the case structure connected to Sample Trigger Source in the niDMM Configure Multi Point VI.

• NI-DMM 2.2 introduces a new enumerated value, AUX Trig 1.
  

• When you run setup.exe to install the software from the CD, you are prompted to choose whether you want to always trust software from National Instruments. If you do not select this option, your installation may be interrupted by one or more Microsoft Windows security dialog boxes. However, if you run setup from the command line, you will not receive this prompt, and the installer will automatically install NI's Software Publisher Certificate to the your Windows Trusted Publisher Store. If you do not want to make this change to your Windows Trusted Publisher Store, do not choose this installation method.

• NI recommends that you disable Windows power management modes, such as sleep, standby, and hibernate, when using this product. These modes terminate any NI-SWITCH operation in progress. Notice that in Windows Vista or on a laptop computer, the default power management settings are likely to enable sleep mode.
  

Changes by Release3.6 from 3.5

• Support for LabVIEW 8.5
  

3.5 from 3.4

• Support for Windows Vista
  

3.4 from 3.3.1

• Support for the NI PXI-2545/2546/2547/2548/2549/2554/2555/2556/2557/2558/2559 switch modules
  

• 上篇：NI-SWITCH 3.5 Win32/64Eng NI开关产品驱动程序3.5下载
• 下篇：NI-SWITCH 3.6.2 Win32/64Eng NI开关产品驱动程序3.6.2下载
• 标签：NI-SWITCH 3.6NI开关产品驱动程序3.6下载NI开关的NI仪器驱动程序可互换虚拟仪器IVI的仪器驱动程序波形或信号发生器NI开关产品驱动