Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI RFIC Test Software 20.5.0 Win64Eng NI-RFIC测试软件20.5.0
RFIC测试软件
RFIC测试软件简化了宽带RF IC的特性分析。
RFIC测试软件是一款应用软件，可帮助您分析功率放大器(PA)和前端模块(FEM)等RFIC的特性。如果要对PA进行线性化，有多种针对特定应用的数字预失真(DPD)算法可供选择，例如查找表(LUT)、记忆多项式(MP)和广义记忆多项式(GMP)。此外，您还可以集成并运行NI联盟伙伴的线性化算法或技术。当使用像PXI矢量信号收发仪这样的NI仪器时，您还可以使用该软件来分析包络跟踪(ET)等功率效率优化技术。您可以使用GUI来保存手动配置和执行，以便重复使用这些配置和执行或与其他测试平台共享。National Instruments Alliance Partner（NI联盟伙伴）是独立于NI的商业实体，与NI之间不存在代理、合伙或合资关系。
Win64ENG
20.5
文件大小: 738572288 字节 (704.36 MB)
修改日期: 2021-01-14 15:45
MD5: 86523ac1555cff3f157965110274c66c（官方正确）
SHA1: b40f554cb2b504eb0b04d3e0ed15ce2b372ccf89
SHA256: 3b579fdfd36c11709ab0d1cdcc293c2bf37ad5e22bdc9c0844ec97e6ce69c28f
CRC32: 7b257ec4
百度网盘与NI官方下载地址：
NI RFIC Test Software 20.5.0 Win64Eng NI-RFIC测试软件20.5.0
http://pcmv.cn/thread-26431-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
FIC Test Software 20.5 Readme
December 2020
This file contains installation instructions and compatibility information for RFIC Test Software 20.5.
You can find more release information on ni.com.
Overview
System Requirements
Supported Operating Systems
Application Software Support
Driver and Add-On Requirements
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware
Accessing the APIs
Finding Examples
Accessing the Help
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
RFIC Test Software Drops Support for Windows 7 (64-Bit) and Windows Server 2008 in 2021
Legal Information
Overview
RFIC Test Software enables you to explore testing advanced RF integrated circuit (RFIC) devices featuring envelope tracking (ET), digital predistortion (DPD), and hardware-accelerated power servoing. Available measurements include adjacent channel power (ACP), spectral emission mask (SEM), error vector magnitude (EVM), AM-to-AM, and AM-to-PM. To set up measurements for your device, use the installed examples or the RFIC Test Soft Front Panel (SFP).
The getting started guide for your device provides information about how to install, configure, test, and begin using your hardware.
System Requirements
RFIC Test Software has the following minimum requirements:
NI recommends the following requirements:
Processor—Intel i5 or equivalent
4 GB RAM*
A screen resolution of 1,600 x 1,200
* Depending on the amount of data acquired and/or processed a larger amount of memory may be required.
Note Guest accounts are not supported under any OS.
Supported Operating Systems
RFIC Test Software 20.5 supports Windows 10/8.11/7 SP12 and is available only in 64-bit.
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Application Software Support
RFIC Test Software supports the following application software versions, including service packs. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Note Install application software, such as LabVIEW or Microsoft Visual Studio, before installing RFIC Test Software. To add support for application software installed after installing RFIC Test Software, modify your RFIC Test Software installation or launch the RFIC Test Software installer again.
Application Software | Versions Supported by RFIC Test Software |
| LabVIEW (64-bit only) | 2017, 2017 SP1, 2018, 2018 SP1, 2019, 2019 SP1, and 2020 |
| Microsoft Visual Studio | 2010 SP1 and later |
| TestStand | 2019 |
Note RFIC Test Software will not operate correctly without the service packs previously mentioned.
Microsoft Visual Studio Support
If you are using the RFIC Test Software .NET Class Library, .NET Framework 4.5 (minimum) is required.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to .NET Resources for NI Hardware and Software.
Driver and Add-On Requirements
RFIC Test Software requires the following driver and add-on versions:
NI-RFSG 20.5
NI-RFSA 20.5
NI-FGEN 20.0
NI-DCPower 20.5
NI-SCOPE 20.0
NI-RFmx SpecAn 20.6
NI-RFmx Demod 20.6
NI-RFmx LTE 20.61
NI-RFmx NR 20.61
NI-RFmx WLAN 20.61
NI-RFSG Playback Library 20.6
(Optional) Single-Band RF Power Amplifier Linearizer 1.6 or later2
(Optional) Dual-Band RF Power Amplifier Linearizer 2.0 or later2
1 Installation and licensing are only required for standard-specific measurements.
2 Requires a valid license.
Note The run-time versions of these products are sufficient to run the RFIC Test SFP.
Refer to the readme of each driver and add-on for more information about system requirements, installation instructions, and activation.
Installation Instructions
Download the RFIC Test Software installer from ni.com/downloads. NI software includes NI Package Manager to handle the installation. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.
Activation Notice
The following table lists the measurements and features included in the RFIC Test Software Base and Professional versions. You must have a valid license to activate RFIC Test Software Professional. Use the serial number that is included with your software to activate RFIC Test Software Professional. For more information about activation, refer to NI Software Activation.
Measurement and Feature | RFIC Test Software Base | RFIC Test Software Professional |
| General measurements | ✓ | ✓ |
| Software-based power servo | Excludes power meter-based servo | ✓ |
| Hardware-accelerated power servo | — | ✓ |
| Transmission power (TXP) | ✓ | ✓ |
| Adjacent channel power (ACP) | ✓ | ✓ |
| Modulation accuracy (ModAcc - including EVM) | ✓ | ✓ |
| Spectral emission mask (SEM) | ✓ | ✓ |
| AM-to-AM (AMAM) and AM-to-PM (AMPM) | ✓ | ✓ |
| Digital predistortion (DPD) | ✓ | ✓ |
| Load pull | Single point only, excludes sweeping | ✓ |
| Power added efficiency (PAE) | — | ✓ |
| Dynamic EVM (DEVM) | — | ✓ |
| Envelope tracking (ET) | — | ✓ |
| Crest factor reduction (pre-DPD and post-DPD) | ✓ | ✓ |
| Swept measurements (power, frequency, and load pull) | Power sweeping only | ✓ |
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
New Features
RFIC Test Software 20.5 includes the following new features:
Support for using power meters to perform power servoing
Support for scalar de-embedding
Support for load pull sweeping
Supported Hardware
The following table shows which hardware products are supported in RFIC Test Software. The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.
Hardware Product | Hardware Model | Application |
| Vector Signal Transceiver | PXIe-5646 | Hardware-accelerated power servoing |
| PXIe-5830 |
| PXIe-5831 |
| PXIe-5840 |
| PXIe-5841 |
| PXIe-5820 | Envelope waveform generation when testing ET DUTs |
| Waveform Generator | PXIe-5451 | Envelope waveform generation when testing ET DUTs
Note For DEVM measurements, use the PXIe-5820. |
| Oscilloscope | PXIe-5162 | |
| PXIe-5185 |
| PXIe-5186 |
| Source Measure Unit | PXIe-4139 | (Optional) Vcc sourcing and system PAE measurements |
| PXIe-414x |
| Power Meter | USB-5681 |
Note Instrument drivers for R&S®NRP-Z are used for R&S® power sensors. R&S®NRP50S is verified. |
| USB-5683 |
| USB-5684 |
| R&S®NRP50S |
Accessing the APIsLabVIEW
ETSync VIs are available in LabVIEW from the Functions»Addons»ET palette.
Power Servo VIs are available in LabVIEW from the Functions»User Libraries»NI Power Servoing IP palette.
NanoSemi Linearizer VIs and NanoSemi Dual Band VIs are available in LabVIEW from the Functions»User Libraries»NanoSemi Linearizer and NanoSemi Dual Band palettes, respectively.
.NET Framework
You can use the ETSync .NET Class library by adding a reference to niETSync.cs, niETUtil.cs, and niFGEN.cs from C:UsersPublicPublic DocumentsNational InstrumentsNI-ETSyncDotNET WrappersCS and any dependent class libraries from within the Solution Explorer in Visual Studio.
You can use the Power Servo .NET Class library by adding a reference to niVSTPowerServo.cs, niRFSA.cs, and niInteropCommon.cs from C:UsersPublicPublic DocumentsNational InstrumentsFPGA Power ServoDotNET WrappersCS and any dependent class libraries from within the Solution Explorer in Visual Studio.
C
You can use the ETSync C dynamically linked library by adding a reference to: Program FilesIVI FoundationIVIBin
iETSync_64.dll.
You can use the Power Servo C dynamically linked library by adding a reference to: Program FilesIVI FoundationIVIBin
iVSTPowerServo_64.dll.
RFIC Test SFP
To launch the RFIC Test SFP, navigate to Start»National Instruments»RFIC Test Soft Front Panel.
Finding Examples
LabVIEW, .NET, and TestStand examples are available via the RFIC Test Automation Wizard, accessible from Start»National Instruments»RFIC Test Automation Wizard.
Accessing the Help
Refer to the RFIC Test Software User Manual (rfichelp.chm) located at Start»National Instruments»RFIC Documentation. The manual includes the following information:
RFIC Test Soft Front Panel information and examples
How to get started with the Test Automation Wizard
How to configure hardware for use with the ETSync API and reference for the ETSync VIs
Theory of operation information on power servoing and reference for the Power Servo VIs
For information about your device, such as getting started, technical specifications, and calibration instructions, refer to the documentation for your device. For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
RFIC Test Software Drops Support for Windows 7 (64-Bit) and Windows Server 2008 in 2021
RFIC Test Software will drop support for Windows 7 (64-bit) and Windows Server 2008 operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
Legal Information
Copyright
© 2004–2020 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377985G-01
