石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI RFIC Test Software 19.1.0 Win64Eng NI-RFIC测试软件19.1.0

文章来源:石鑫华视觉网时间:2022-05-26 11:41:55 点击:233

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI RFIC Test Software 19.1.0 Win64Eng NI-RFIC测试软件19.1.0

RFIC测试软件
RFIC测试软件简化了宽带RF IC的特性分析。
RFIC测试软件是一款应用软件，可帮助您分析功率放大器(PA)和前端模块(FEM)等RFIC的特性。如果要对PA进行线性化，有多种针对特定应用的数字预失真(DPD)算法可供选择，例如查找表(LUT)、记忆多项式(MP)和广义记忆多项式(GMP)。此外，您还可以集成并运行NI联盟伙伴的线性化算法或技术。当使用像PXI矢量信号收发仪这样的NI仪器时，您还可以使用该软件来分析包络跟踪(ET)等功率效率优化技术。您可以使用GUI来保存手动配置和执行，以便重复使用这些配置和执行或与其他测试平台共享。National Instruments Alliance Partner（NI联盟伙伴）是独立于NI的商业实体，与NI之间不存在代理、合伙或合资关系。

Win64ENG
文件大小: 551280640 字节 (525.74 MB)
修改日期: 2020-01-08 14:01
MD5: 2b798e9a1a822063bb70b239bd2fa8d2（官方正确）
SHA1: 69cd002e4343f525af573d1e63ebeff96c28bc80
SHA256: a94a5bf3194b711b8046383c1bda261accda6282a588266288eaaa18d2f578c7
CRC32: b7e5f2e1

百度网盘与NI官方下载地址：

NI RFIC Test Software 19.1.0 Win64Eng NI-RFIC测试软件19.1.0

http://pcmv.cn/thread-26428-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)


RFIC Test Software 19.1 Readme

December 2019
This file contains important information about RFIC Test Software, including new features, supported hardware, a partial list of bugs fixed for RFIC Test Software 19.1, and known issues.
Overview
New Features
Supported Hardware
System Requirements
Supported Operating Systems
Application Software Support
Driver and Add-On Requirements
Accessing the APIs
Finding Examples
Accessing the Documentation
Installation Instructions
Product Security and Critical Updates
Known Issues
Bug Fixes
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 10
How to Use NI Software with Microsoft Windows 8.1
RFIC Test Software Drops Support for Windows 7 (64-Bit) and Windows Server 2008 in 2021
Legal Information

Overview

RFIC Test Software enables you to explore testing advanced RF integrated circuit (RFIC) devices featuring envelope tracking (ET), digital predistortion (DPD), and hardware-accelerated power servoing. Available measurements include adjacent channel power (ACP), spectral emission mask (SEM), error vector magnitude (EVM), AM-to-AM, and AM-to-PM. To set up measurements for your device, use the installed examples or the RFIC Test Soft Front Panel (SFP).

The getting started guide for your device provides information about how to install, configure, test, and begin using your hardware.

New Features

RFIC Test Software 19.1:

  • New RFIC Test Automation Wizard providing LabVIEW and .NET TestStand examples for 5G New Radio (NR), Wireless local area network (WLAN), and Long-Term Evolution (LTE) applications

  • Support for MATLAB custom DPD script in the RFIC Soft Front Panel and RFIC legacy examples

  • Interactive, multi-device debugging capabilities now described in the RFIC Test Software Manual

  • Support for NI-RFSA 19.2

RFIC Test Software 19.0:

  • Support for PXIe-5830 Vector Signal Transceiver intermediate frequency (IF)

  • Support for PXIe-5831 Vector Signal Transceiver, including IF

  • Support for downlink test model definitions with 5G NR downlink measurements

  • Support for the Automatic SG SA Shared LO property via RFmx and Automatic LO offset using NI-RFSG Playback Library

  • Support for NanoSemi Linearizer 1.6 (nst_dpd_train_without_align) in combination with RFmx DPD alignment

  • Support for NI-RFSA 19.0

  • RFIC Test Soft Front Panel updates

    • Removed dependency on the RFmx WLAN

    • Added measurement results for each DPD iteration to the summary table

RFIC Test Software 3.0:

  • Support for 5G NR

  • Support for NanoSemi Linearizer

  • New extensions framework for the PXIe-5840 Vector Signal Transceiver FPGA bitfile

RFIC Test Software 2.5:

  • Improvements to the WLAN examples

  • New measurement series (power sweep) examples

  • New LTE downlink measurement example

  • New power amplifier enable (PAEN) signal generation examples

  • Support for NI-RFSA 18.1

  • RFIC Test Soft Front Panel updates

    • Support for measurement series (power sweep)

    • Support for LTE downlink measurements

RFIC Test Software 2.3:

  • Support for the PXIe-5820 Vector Signal Transceiver as the arbitrary waveform generator in ET examples

  • Support for NI-RFSA 17.1

  • RFIC Test Soft Front Panel updates

    • Support for the PXIe-5820 as the arbitrary waveform generator in ET mode

    • Improvements to DPD

    • Support for performing crest factor reduction (CFR) on reference and DPD waveforms

    • Support for performing Vcc sourcing and system DC current, voltage, and power-added efficiency (PAE) measurements

    • Support for performing WLAN 802.11ax measurements

  • Updated to new installer system

RFIC Test Software 2.2:

  • New LabVIEW measurement example for WLAN 802.11ax

  • Support for TDMS file version 2.0

RFIC Test Software 2.1:

  • Support for the PXIe-5840

    Note  This release provides no official support for WLAN measurements using the PXIe-5840.

  • Support for ETSync 2.0 (PXIe-5646 Vector Signal Transceiver only)

RFIC Test Software 2.0:

  • Support for performing LTE uplink (UL) EVM, ACP, and SEM measurements

  • Support for performing wideband code division multiple access (WCDMA) EVM, ACP, and SEM measurements

  • New LabVIEW measurement examples for LTE, WCDMA, time division synchronous code division multiple access (TD-SCDMA), CDMA2000, Evolution-Data Optimized (EV-DO), Global System for Mobile Communications Enhanced Data Rates for GSM Evolution (GSM-EDGE), and WLAN

  • Support for performing PAE measurements using NI-Scope

  • Support for using detrough shaping functions for ET

  • Support for .NET programming languages

Supported Hardware

The following table shows which hardware products are supported in RFIC Test Software. The following hardware products are supported in all operating systems listed in the Supported Operating Systems section.


Hardware Product
Hardware Model
Application
Vector Signal TransceiverPXIe-5646
Hardware-accelerated power servoing
PXIe-5830
PXIe-5831
PXIe-5840
PXIe-5841
PXIe-5820
Envelope waveform generation when testing ET devices under test (DUTs)
Waveform GeneratorPXIe-5451
Envelope waveform generation when testing ET DUTs
Note  For DEVM measurements, use the PXIe-5820.
OscilloscopePXIe-5162

  • PAE measurements

  • (Optional) Recommended for envelope waveform/delay analysis when testing ET DUTs

PXIe-5185
PXIe-5186
Source Measure UnitPXIe-4139
(Optional) Vcc sourcing and system PAE measurements
PXIe-414x

System Requirements

RFIC Test Software has the following minimum requirements:

  • Processor—Intel Pentium 4 or equivalent

  • 1 GB RAM*

  • A screen resolution of 1,024 x 768 with 256 colors

  • Windows 10/8.1/7, with all available critical updates and service packs

NI recommends the following requirements:

  • Processor—Intel i5 or equivalent

  • 4 GB RAM*

  • A screen resolution of 1,600 x 1,200

  • Windows 10/8.1/7, with all available critical updates and service packs

* Depending on the amount of data acquired and/or processed a larger amount of memory may be required.
Note  Guest accounts are not supported under any OS.

Supported Operating Systems

RFIC Test Software 19.1 supports Windows 10/8.11/72 (64-bit).
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note  Refer to RFIC Test Software Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021 for information about future OS support.

Application Software Support

RFIC Test Software supports the following application software versions, including service packs. You should install application software, such as LabVIEW or Microsoft Visual Studio®, before installing RFIC Test Software. To add support for application software installed after installing RFIC Test Software, modify your RFIC Test Software installation or launch the RFIC Test Software installer again. If you are not using NI application software, refer to Microsoft Visual Studio Support.
Application Software
Versions Supported by RFIC Test Software
LabVIEW64-bit of 2016, 2017 SP1, 2018 SP1, or 2019
Microsoft Visual Studio2010 SP1 and later
TestStand2019 and later
Note  RFIC Test Software will not operate correctly without the service packs previously mentioned.

Microsoft Visual Studio Support

If you are using the RFIC Test Software .NET Class Library, .NET Framework 4.5 (minimum) is required.
To use the .NET API, you must install the .NET class libraries or the .NET wrapper in addition to the NI device driver. For information about versions of the .NET Framework and the drivers each supports, as well as the download location of the installer files, refer to National Instruments .NET Driver Support.

Driver and Add-On Requirements

RFIC Test Software requires the following driver and add-on versions:

  • NI-RFSG 19.2

  • NI-RFSA 19.2

  • NI-FGEN 19.5.1

  • NI-DCPower 19.5.0

  • NI-SCOPE 19.5

  • NI-RFmx SpecAn 19.1

  • NI-RFmx Demod 19.1

  • NI-RFmx LTE 19.11

  • NI-RFmx NR 19.11

  • NI-RFmx WLAN 19.11

  • NI-RFSG Playback Library 19.1

  • (Optional) NanoSemi Linearizer 1.62

1 Installation and licensing are only required for standard-specific measurements.
2 Requires a valid license.
Note  The run-time versions of these products are sufficient to run the RFIC Test Soft Front Panel.

Accessing the APIsLabVIEW

ETSync VIs are available in LabVIEW from the Functions»Addons»ET palette.
Power Servo VIs are available in LabVIEW from the Functions»User Libraries»NI Power Servoing IP palette.
NanoSemi Linearizer VIs are available in LabVIEW from the Functions»User Libraries»NanoSemi Linearizer palette.

.NET Framework

You can use the ETSync .NET Class library by adding a reference to niETSync.cs, niETUtil.cs, and niFGEN.cs from C:UsersPublicDocumentsNational InstrumentsNI-ETSyncDotNET WrappersCS and any dependent class libraries from within the Solution Explorer in Visual Studio.
You can use the Power Servo .NET Class library by adding a reference to niVSTPowerServo.cs, niRFSA.cs, and niInteropCommon.cs from C:UsersPublicDocumentsNational InstrumentsFPGA Power ServoDotNET WrappersCS and any dependent class libraries from within the Solution Explorer in Visual Studio.

C

You can use the ETSync C dynamically linked library by adding a reference to: Program Files (x86)IVI FoundationIVIBin iETsync_32.dll for 32-bit development or Program FilesIVI FoundationIVIBin iETSync_64.dll for 64-bit development.
You can use the Power Servo C dynamically linked library by adding a reference to: Program Files (x86)IVI FoundationIVIBin iVSTPowerServo_32.dll for 32-bit development or Program FilesIVI FoundationIVIBin iVSTPowerServo_64.dll for 64-bit development.

RFIC Test SFP

To launch the RFIC Test SFP, navigate to Start»National Instruments»RFIC Test Soft Front Panel.

Finding Examples

Examples for LabVIEW, .NET and Teststand are available via the RFIC Test Automation Wizard (Start»National Instruments»RFIC Test Automation Wizard).
Examples from previous releases for LabVIEW and .NET are now "Legacy Examples" accessible from Start»National Instruments»RFIC Legacy Examples.

Accessing the Documentation

Documentation for RFIC Test Software is located at Start»All Programs»National Instruments»RFIC Documentation. The documentation set is composed of the following documents.
Document
Format
Description
RFIC Test Software ManualPDFContains primary help content for RFIC Test Software products. The manual includes the following information:

  • How to get started with the Test Automation Wizard

  • RFIC Test Soft Front Panel information and examples

Getting Started Guide for your devicePrinted and PDFContains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device.
Specifications for your devicePDFLists technical specifications for your device.
Calibration Procedure for your devicePDFContains calibration instructions for your device.
RFIC Test Software ReadmeHTML (this document)Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices.
ETSync API ReferencePDFContains information about configuring hardware for use with the ETSync API and a complete reference for ETSync VIs, properties, and functions.
Power Servo Theory of OperationPDFContains theory of operation information on power servoing and a complete reference for Power Servo VIs, properties, and functions.
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Note  To view PDFs, you need to have Adobe Acrobat Reader installed. You can install the viewer from www.adobe.com/acrobat.

Installation Instructions

NI installs RFIC Test Software using NI Package Manager. If you do not already have NI software installed, RFIC Test Software installs NI Package Manager to handle the installation of your NI software. Visit ni.com/r/NIPMDownload to download NI Package Manager. Refer to the NI Package Manager Manual for more information about installing, removing, and upgrading NI software using NI Package Manager.

Product Security and Critical Updates

Visit ni.com/critical-updates for information about critical updates and security notifications from National Instruments.

Known Issues

You can access the software and documentation known issues list online. Visit RFIC Test Software 19.1 Known Issues for an up-to-date list of known issues.

Bug FixesRFIC Test Software

The following items are a subset of issues fixed between RFIC Test Software revisions. This section is not an exhaustive list of issues fixed in the current version of RFIC Test Software.

RFIC Test Software 19.1

  • Fixed an issue where the updated reference waveform was not applied for multiple DPD iterations.

RFIC Test Software 19.0.2

  • Fixed an issue in the Initialize function of the Power Servo LabVIEW API which could cause multi-threading safety issues.

RFIC Test Software 19.0.1

  • Fixed an issue in the LabVIEW example (RFIC Msmt Example NanoSemi CFR + DPD + AMPM.vi) for bursted waveforms by considering burst information from the waveform file for the alignment procedure.

RFIC Test Software 19.0

  • Corrected export behavior of the reference trigger in conjunction with Power Servo.

  • Fixed an issue where the Power Servo C interface sometimes failed with a time-out error when running in a loop.

RFIC Test Software 3.0

  • Fixed an issue where errors prevented LabVIEW measurement examples from closing sessions and required restarting your device.

RFIC Test Software 2.5

  • Fixed an issue where using the PXIe-5668 Vector Signal Analyzer in the WLAN shipping example caused a configuration error.

  • Fixed an issue in which the wrong number of waveform samples for the arbitrary waveform generator in the WLAN DEVM example resulted in an error.

  • Fixed an issue where the Power Servo function declaration did not match in the Power Servo wrapper, niVSTPowerServo.cs, and the header files, niVSTPowerServo_[32/64].h.

RFIC Test Software 2.3.1

  • Fixed an issue where the dynamic link library (DLL) load failed in the ETSync API.

  • Fixed an internal error in the installer.

RFIC Test Software 2.3

  • Fixed an issue in which trigger conditions on PXIe-5840 were unstable in the FPGA Power Servo.

  • Fixed an issue with the behavior of Abort VI in case of incoming errors in the FPGA Power Servo.

  • Fixed an issue where servo measurement time on the PXIe-5840 was calculated incorrectly in the FPGA Power Servo.

  • Fixed an issue with the behavior of Abort VI in case of incoming errors in the ETSync API.

  • Fixed an issue in which the DPD Target Gain Type property calculated the Peak Power Adjustment incorrectly after DPD.

RFIC Test Software 2.2

  • Fixed an issue where the RFSG Playback Library was used incorrectly.

  • Fixed an issue where TDMS file versions were not compatible.

  • Fixed an issue where deprecated DPD API VIs were used.

RFIC Test Software 2.1

  • Fixed an issue where the TD-SCDMA midamble shift was mishandled in the TD-SCDMA example and corresponding example waveform.

  • Fixed an issue where the AMPM Phase Error Range returned an incorrect result.

  • Fixed an issue where the AMPM Mean Error Range did not return a result.

RFIC Test Software 2.0

  • Fixed an issue where an incorrect signal was generated if the user-defined sampling rate for AMPM/DPD differed from the sampling rate of the test waveform.


RFIC Test SFP

The following items are a subset of issues fixed between RFIC Test SFP revisions. This section is not an exhaustive list of issues fixed in the current version of RFIC Test SFP.

RFIC Test SFP 19.0.1

  • Fixed an issue with version handling for NanoSemi Linearizer 1.6 for RFmx alignment support (call into NanoSemi "without aligment" function).

  • Fixed an issue when using DPD bursted waveforms with NanoSemi Linearizer by adding burst detection for the alignment procedure.

RFIC Test SFP 3.0

  • Fixed an issue where configuring multiple LTE DL subblocks lead to an error during ACP measurements.

  • Fixed an issue in which ACP Offset channel traces were invisible due to poor contrast with the background.

  • Fixed an issue where the ACP result summary listed the same offset multiple times if multiple subblocks were configured.

  • Fixed an issue where the PFI output would only active the first time after configuration when using the static PFI mode to trigger an amplifier.

RFIC Test SFP 2.5

  • Fixed an issue where the pre-DPD and post-DPD output powers were not consistent.

  • Fixed an issue where the SFP would crash when the current limit for the SMU was exceeded.

  • Fixed an issue where the SFP would crash when attempting to save waveforms in a directory that did not exist.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

  • For more information about silent installations of individual NI products, refer to Customize and Automate Installation of a Single Installer.

  • For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to Customize and Automate Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to Determine Type and Version of My National Instruments Installer.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

RFIC Test Software Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021

RFIC Test Software will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
Product
Info Code
LabVIEWlifecycle
LabWindows/CVIcvi_lifecycle
Measurement Studiomstudiolifecycle
TestStandtslcp
DIAdemddlcp
SignalExpressselcp
VeriStandnivslifecycle

Legal Information

Copyright
© 2004–##year## National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
377985D-01


首页
84162741QQ
联系