Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI PXI MultiComputing 1.0 Driver Win32Eng NI-PXImc远程控制模块驱动程序1.0
NI-PXImc
NI-PXImc为使用NI PXI MultiComputing远程控制模块的客户提供支持。
NI-PXImc是一个NI仪器驱动程序，可让两个或更多智能系统利用非透明(NT)桥接技术，通过PCI Express进行数据交换。NI-PXImc驱动程序抽象了PXI MultiComputing (PXImc)接口的底层细节，并提供了一种简单有效的API来进行数据传输。
Win32Eng
1.0
文件大小: 402125600 字节 (383.50 MB)
修改日期: 2013-09-04 03:50
MD5: 875eafe712063912b7a446080fa45242（官方正确）
SHA1: e856bfd907ac368eaa37cf2f4847cd507c3c4745
SHA256: 667ac8a1befed5fa448b7306073646f903d4add6efe7139fa1653c090bef0858
CRC32: b79de042
百度网盘和NI官方下载地址：
NI PXI MultiComputing 1.0 Driver Win32Eng NI-PXImc远程控制模块驱动程序1.0
http://pcmv.cn/thread-26417-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-PXImc™ Readme
Version 1.0
August 2013
This file contains information about the NI-PXImc software for Windows 7 and LabVIEW Real-Time (RT). Information in this file is organized in the following sections:
Overview
System Requirements
Installation Instructions
NI-PXImc General Considerations
Accessing the Help
Finding Examples
Overview
The NI-PXImc software enables you to create customized applications for your PXImc hardware (NI PXIe-8383mc) either in LabVIEW or C/C++.
System RequirementsSupported Operating Systems
You can install and run this version of the NI-PXImc software on the following operating systems:
NOTE National Instruments recommends 3 GB or more RAM for Windows 7 (32-bit) and LabVIEW Real-Time (ETS), and a minimum 8 GB RAM for Windows 7 (64-bit). Refer to System RAM for more information.
Software Requirements
NI-PXImc software requires at least one of the following software applications:
If you want to run NI-PXImc software on the NI real-time hardware platforms, you must also install the LabVIEW 2012 SP1 Real-Time Module or LabVIEW 2013 Real-Time Module.
Note: The Real-Time Module is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
Supported Hardware
The NI-PXImc software currently supports the following hardware product:
The NI PXIe-8383mc PXImc adapter modules utilize a x8 PCI Express 2.0 interface for transferring data. National Instruments recommends using the NI PXIe-8383mc with a PXI-Express chassis and controller combination that provide high PCI Express bandwidth. If you are using the NI PXIe-8383mc module in a chassis with an NI embedded controller, then you must update the BIOS software on that embedded controller to the latest released BIOS software prior to connecting the hardware. For more information, refer to KnowledgeBase 2GIGKD0Z, Determining and Upgrading PXI and VXI Embedded Controller BIOS Versions.
Bandwidth experienced when using NI-PXImc may be affected by bandwidth capabilities of the controller or the chassis. If you experience lower than expected bandwidth when using NI-PXImc, check that your controller and chassis are capable of supporting the desired bandwidth, and that your PXImc adapter module is inserted into an appropriate chassis slot to obtain the best performance. Consult your chassis and controller documentation for specific information relevant to your hardware configuration.
Note: National Instruments recommends an NI high performance PXIe embedded controller be used both as the system controller and as the controller connected to the front panel of the PXImc module. Refer to NI-PXImc General Considerations for more information.
Installation Instructions
The following sections include important information about installing爐he NI-PXImc software.
You can run the NI-PXImc installer on the following operating systems:
Before installing the NI-PXImc software, log on as Administrator or as a user with Administrator privileges. The NI-PXImc software setup program must have Administrator privileges because the program modifies the configuration registry of your system.
Tip For optimal performance, update your operating system to the latest service pack and apply all security patches.
Downloading燦I-PXImc from the Web
Complete the following steps to install the NI-PXImc software from a web download:
Download the�NIPXImc100.exe爁ile, and then run it.
Follow the onscreen instructions.
Note Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installation is complete, a dialog box appears that asks if you want to restart, shut down, or restart later. Select�Restart.
Installing from the CD
Complete the following steps to install the NI-PXImc software from the installation media:
Insert the NI-PXImc software media. If you have autorun enabled,�autorun.exe� runs automatically. Otherwise, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-PXImc software media.
Follow the onscreen instructions.
Note Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installation is complete, a dialog box appears that asks if you want to restart, shut down, or restart later. Select�Restart.
Installing the Software on a Real-Time Target
Complete the following steps to install the NI-PXImc software on a real-time target in Measurement & Automation Explorer (MAX):
Expand Remote Systems in the configuration tree and expand your real-time target.
Select the Software category. Click the Add/Remove Software icon on the toolbar to launch the LabVIEW Real-Time Software Wizard.
Select NI-PXImc in the feature list and click Next.
Follow the remaining installation instructions until installation is complete.
NI-PXImc General ConsiderationsNI Embedded Controller BIOS Versions
For proper operation with NI-PXImc, all NI Embedded Controllers must be running the latest BIOS. For more information, refer to KnowledgeBase 2GIGKD0Z, Determining and Upgrading PXI and VXI Embedded Controller BIOS Versions.
Recommended NI Embedded Controllers
National Instruments recommends an NI high performance PXIe embedded controller be used both as the system controller and as the controller connected to the front panel of the PXImc module. If you are connecting the PXImc module to an NI PXIe embedded controller, you must update the BIOS software on that embedded controller to the latest released BIOS software prior to connecting the hardware. Refer to NI Embedded Controller BIOS Versions for information about updating the BIOS.
Bandwidth experienced when using NI-PXImc may be affected by bandwidth limitations in the controller or on the chassis backplane. If you experience lower than expected bandwidth when using NI-PXImc, check that your controller and chassis are capable of supporting the desired bandwidth, and that your PXImc card is inserted into an appropriate chassis slot to obtain the best performance. Consult your chassis and controller documentation for specific information relevant to your hardware configuration.
System RAM
National Instruments recommends a minimum 3 GB RAM for Windows 7 (32-bit) and LabVIEW Real-Time (ETS), and a minimum of 8 GB RAM for Windows 7 (64-bit). To maximize the available PXImc buffer, National Instruments recommends either Windows 7 (64-bit) or LabVIEW Real-Time (ETS).
Note The available PXImc buffer will likely be reduced if the above recommendations are not followed. Refer to Setting an Appropriate Buffer Size in the NI-PXImc Help for more information about buffer size.
User Mode and Factory Mode Settings for the NI PXIe-8383mc Module
National Instruments recommends setting the hardware Mode DIP switch (Switch 4) to User Mode for optimal performance. Refer to the NI PXImc Devices Getting Started Guide, available in the NI PXIe-8383mc kit and on ni.com/manuals, for information about the DIP switch functionality and location. Refer to the Hardware Configuration section in the NI-PXImc Help for more information about the differences between the two modes.
Power Sequence
The PXIe chassis that contains the NI PXIe-8383mc module must be powered on before the system connected to the front panel connector is powered on. Furthermore, the PXIe chassis that contains the NI PXIe-8383mc module must be continuously powered while the system connected to the front panel connector is powered on. If it is necessary to turn off the chassis containing the PXIe-8383mc, the system connected to the front panel must be powered off first. Refer to the NI PXImc Devices Getting Started Guide, available in the NI PXIe-8383mc kit and on ni.com/manuals, for more information about power sequence.
Using Third-Party Controllers
Many third-party PXI Express controllers, both PXIe embedded controllers and desktop PCs, have been observed to have BIOS issues that prevent the enumeration of some PXIe modules. If you have boot or device enumeration issues, set the hardware Mode DIP switch (Switch 4)on your PXImc modules to Factory mode and try again. Refer to the NI PXImc Devices Getting Started Guide, available in the NI PXIe-8383mc kit and on ni.com/manuals, for information about the DIP switch functionality and location. If you continue to have issues, either contact your controller vendor for a BIOS fix or upgrade your controller to a National Instruments high performance PXIe embedded controller.
Module Count
When configuring the module in "User" mode, NI recommends no more than six NI PXIe-8383mc modules be connected to a single system running Windows 7(64-bit), and no more than four modules be connected to a system running Windows 7 (32-bit), either directly in the system or connected through the NI PXIe-8383mc front panel connector. If you are using the NI PXIe-8383mc in a system with LabVIEW Real-Time (ETS) OS, NI recommends no more than four NI PXI-8383mc modules to a single system, either directly in the system or connected through the NI PXI-8383mc front panel connector. If your system needs more than the recommended number of modules, either change the configuration mode to "FACT" mode for all modules or contact National Instruments support.
Accessing the Help
Refer to the NI-PXImc Help, accessible by selecting Help»NI-PXImc Help from the pull-down menu in LabVIEW, for information about using the NI-PXImc software.
Finding Examples
LabVIEW examples for the NI-PXImc software are in the labviewexamplesNI-PXImc folder. You can modify an example VI to fit an application or copy and paste from one or more examples into a VI you create.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Important Information
Copyright
© 2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
