石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活：NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种NI资源，除了视觉相关的模块有使用外，大部分的都不会使用，仅提供资源不提供技术支持。资源的下载地址一般会同时提供NI官方和百度网盘的地址。某些工具包NI地址失效或没有NI地址，只能使用百度网盘地址；如果百度网盘地址失效过期，可联系论坛客服更新。NI的服务器在美国，有时候速度很慢或下载容易出错，这样会造成安装时各种错误而无法安装。建议在下载完成后，对下载资源做校验和(NI一般会提供MD5或SHA256等)验证，与官方或视觉论坛提供的校验和对比，一致就可以安装；如不一致，则需要重新下载。视觉论坛早期下载上传的资源，基本上都是正常下载的资源；2019后下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘。校验和工具下载地址：文件Hash计算器FHash，文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算http://pcmv.cn/thread-26524-1-1.html
NI-FGEN 14.0.0f1 Patch Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序14.0.0f1补丁
NI-FGEN
NI-FGEN为使用NI波形发生器产品的客户提供支持。
NI-FGEN是一款NI仪器驱动程序，可实现复杂测量解决方案所需的频率扫描和跳频、波形链接和循环以及频移键控(FSK)调制。 NI-FGEN驱动程序可兼容可互换虚拟仪器(IVI)，它具有一系列操作和属性，可以执行波形或信号发生器的功能，并提供交互式软件前面板和示例。
Win32/64Eng/Jpn
14.0Patch
文件大小: 40392565 字节 (38.52 MB)
修改日期: 2019-06-25 03:08
MD5: 3b686987f68d71183eb1113d2a91511a（官方正确）
SHA1: fe5dadf680aa1f3dd67b1933e52d061694258246
SHA256: effcbda1e1d6067d4a3ddd1ffd1f9a3a5ea19b8baa6659d48ef21578e28fe58d
CRC32: 7d5610a2
百度网盘与NI官方下载地址：
NI-FGEN 14.0.0f1 Patch Driver Win32/64 Eng/Jpn NI-FGEN波形发生器仪器驱动程序14.0.0f1补丁
http://pcmv.cn/thread-26323-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-FGEN Readme
New Features
Enhanced support for filter group delay compensation for NI PXIe-5442 Rev D or higher.
Support for allowing I/Q rates up to 400 MS/s when using onboard signal processing mode on the NI PXIe-5450/5451.
Support for streaming write timeout.
Improved I/Q rate reconfiguration time for the NI PXIe-5450 and NI PXIe-5451.
Support for including NI-FGEN run-time in custom installers built using National Instruments application development environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using NI signal generators.
The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX), SignalExpress, or the FGEN Soft Front Panel.
The run-time installer does not support upgrading from NI-FGEN 2.8.x or earlier, or NI-DAQmx 8.9.x or earlier. You must uninstall these products prior to installing the NI-FGEN run-time installer.
The run-time installer does not support the NI 5401, NI 5411, or NI 5431.
Support for peer-to-peer streaming with the NI PXIe-5450 (module revision C only) and NI PXIe-5451.
New firmware for the NI PXIe-5450 and NI PXIe-5451. This firmware upgrade is required for all NI PXIe-5450 and NI PXIe-5451 devices. Refer to Upgrading Firmware for more information about this new firmware.
Support to reset writeable attributes to driver default values. In C, call the niFgen_ResetAttribute function. In LabVIEW, right-click the niFgen Property Node, and select Change To»Default Value.
Support for stream n script instruction.
Supported Hardware
| Hardware Product | Supported Under Windows 8/7/Vista1 | Supported Under Windows XP1 | |
| NI PXI/PCI-5401 Function Generator | X2 | √ | |
| NI PXI/PCI-5402 Function Generator | √ | √ | |
| NI PXI-5404 Frequency Generator | √3 | √ | |
| NI PXI/PCI-5406 Function Generator | √ | √ | |
| NI PXI/PCI-5411 Arbitrary Waveform Generator | X2 | √ | |
| NI PXI/PCI-5412 Arbitrary Waveform Generator | √ | √ | |
| NI PXI/PCI-5421 Arbitrary Waveform Generator | √ | √ | |
| NI PXI-5422 Arbitrary Waveform Generator | √ | √ | |
| NI PXI/PCI-5431 Video Signal Generator | X2 | √ | |
| NI PXI-5441 Arbitrary Waveform Generator with Onboard Signal Processing | √ | √ | |
| NI PXIe–5442 Arbitrary Waveform Generator with Onboard Signal Processing | √ | √ | |
| NI PXIe–5450 Dual-Channel I/Q Generator with Onboard Signal Processing | √ | √ | |
| NI PXIe–5451 Dual-Channel Arbitrary Waveform Generator with Onboard Signal Processing | √ | √ | |
| 1 MXI Express and MXI-4 are supported on Windows 8/7/Vista/XP, but MXI-3 is supported on only Windows XP. 2Simulating these devices is also not supported on Windows 8/7/Vista, using either the NI-FGEN or the FGEN Soft Front Panel. Simulating a device that is not supported on your operating system results in indeterminate behavior. 3 Windows 8/7/Vista support for the NI 5404 does not include support for external calibration. Perform external calibration for the NI 5404 on Windows XP operating systems. | |||
System RequirementsSupported Operating Systems
Windows 8 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 2 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Supported Real-Time Operating Environments
LabVIEW Real-Time Module
LabWindows™/CVI™ Real-Time Module
Minimum System Requirements
Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—
Windows 8/7/Vista: 512 MB
Windows XP Service Pack 3 (SP3): 128 MB
Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
Recommended System
Processor—Pentium 4 or equivalent
RAM—
Windows 8/7/Vista: 1 GB
Windows XP SP3: 256 MB
A screen resolution of 1,024 x 768
Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
Application Development Environments (ADEs)
NI LabVIEW 2011 SP1 (32- and 64-bit), 2012 SP1 (32- and 64-bit), 2013 (32- and 64-bit), 2014 (32- and 64-bit)
NI LabVIEW Real-Time Module 2011 SP1, 2012 SP1, 2013 SP1, or 2014 (no support for NI PXI/PCI-5401/5411/5431 devices)
LabWindows/CVI 9.0.1 or later
LabWindows/CVI Real-Time Module 2009 or later (no support for NI PXI/PCI-5401/5411/5431 devices)
Measurement Studio 6.0 or later
Microsoft Visual C++ (MSVC) 6.0 or later
If you are running your application on an RT target, 128 MB of memory or more is required.
Installed Software, Documentation, and Examples
<NIDocDir> is an alias for the following National Instruments file folder location:
Windows 8/7/Vista: UsersPublicDocumentsNational Instruments
Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments
<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI
Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI FoundationIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI FoundationIVI
| NOTES: | $(IVIROOTDIR32) is configured as an environment variable on the target system. |
| If you upgraded an installation of IVI, your files may be in the following location: |
<IVIROOTDIR64> is an alias for the following National Instruments file folder location:
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program FilesIVI FoundationIVI
| NOTE: | $(IVIROOTDIR64) is configured as an environment variable on the target system. |
File Locations
| Item | Installed Location on Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP |
| NI-FGEN | <IVIROOTDIR32>Drivers iFgen |
| NI-FGEN Function Panel | <IVIROOTDIR32>Drivers iFgen ifgen.fp |
| NI-FGEN Examples | <NIDocDir>NI-FGENExamples |
| NI-FGEN Header files | <IVIROOTDIR32>Include |
| NI-FGEN Import Library files | <IVIROOTDIR32>Lib |
| NI-FGEN DLL | <IVIROOTDIR32>Bin |
Additional File Locations for Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit)
| Item | Installed Location on Windows 8/7 (64-bit)/Vista (64-bit) |
| NI-FGEN Function Panel | <IVIROOTDIR64>Drivers iFgen ifgen.fp |
| NI-FGEN Header files | <IVIROOTDIR64>Include |
| NI-FGEN Import Library files (64-bit) | <IVIROOTDIR64>Lib_x64 |
| NI-FGEN DLL (64-bit) | <IVIROOTDIR64>Bin |
Executable
Documentation
| Document | Format | Description |
| NI Signal Generators Help | HTML/Windows Help | Contains complete reference material for NI-FGEN products. The help is an HTML version of a traditional user manual that includes the following information:
|
| Getting Started Guide for your device | Printed and PDF | Contains software and hardware installation, MAX configuration, signal connection, and troubleshooting information for your device. |
| Specifications for your device | Lists technical specifications for your device. | |
| Calibration Procedures for your device | Contains calibration instructions for your device. | |
| NI-FGEN Readme | HTML (this document) | Contains information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
Accessing VIs and Functions
Finding Examples
Click the Browse tab to locate modulation examples by task at Hardware Input and Output»Modular Instruments»NI–FGEN or by directory structure at instr»niFgen.
Click the Search tab to search all installed examples by keyword. For example, search for "FGEN" to locate all NI signal generator examples.
Product Security and Critical Updates
Driver Version Naming Changes
Uninstalling/Modifying NI-FGEN
Launch the Control Panel by selecting Start»Control Panel.
Double-click Add/Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-FGEN 14.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-FGEN 14.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click the Start screen.
Select All apps and launch the Control Panel.
Select Programs»Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-FGEN 14.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
NI-FGEN Run-Time 14.0
NI Hierarchical Waveform Storage 14.0
NI IVI Compliance Package 4.4
NI Measurement & Automation Explorer 5.4
Traditional NI-DAQ 7.4.4 (Windows XP only)
NI-DAQmx 9.1.7
NI-VISA Run-Time 5.0
NI I/O Trace 3.0
Upgrading Firmware
Known Issues
Bug Fixes
| Bug ID | Fixed Issue |
| 317520 | Fixed an issue in which an error occured when trying to build an installer in LabVIEW for an NI-FGEN 2.9 executable. |
| Bug ID | Fixed Issue |
| 242645 | Fixed an issue in which NI-FGEN does not report the correct error when LabVIEW FPGA 2010 is installed. You must install LabVIEW FPGA 2010 SP1 for this bug fix. |
| 240183 | Fixed an issue in which using dynamic FPGA interfaces in the LabVIEW FPGA Module were not supported when using peer-to-peer streaming. You must install NI-RIO 3.5.1 for this bug fix. |
| 280577 | Fixed an issue in which NI-FGEN returns an incorrect error description when an invalid session handle is passed into NI-FGEN VIs. |
| 314922 | Fixed an issue in which NI-FGEN returns an incorrect maximum waveform size after you call the niFgen Clear Arbitrary Memory VI on NI PXIe-5450 and NI PXIe-5451. |
| 313189 | Fixed an issue in which LabVIEW could crash when reading the Gain DAC Value property. |
| N/A | Fixed an issue in which NI-FGEN could return an unrecoverable error when transitioning to the Committed state by calling the niFgen Commit VI, the niFgen_Commit function, or calling a create or write waveform VI or function. You must install NI-DAQmx 9.0 or later for this bug fix. |
| Bug ID | Fixed Issue |
| 241656 | Fixed firmware to synchronize power supplies for improved phase noise performance. |
| 199899 | Fixed an issue in which calling calibration utility functions in a normal NI-FGEN session affected output by disabling self-calibration constants. |
| 182502 | Fixed an issue in which running test panels for the NI PXIe-5450 and NI PXIe-5451 using the LabVIEW Real-Time Module did not write waveform data. This issue caused the output signal to be random. |
| 183093 | Fixed an issue in which waking from sleep mode could crash the operating system in some configurations, especially if the video, network, or other drivers were out of date. |
| 187791 | An issue was fixed in which LabVIEW 2009 (64-bit) could crash if you created more than one session using the same resource name. You must install LabVIEW 2009 SP1 (64-bit) for this bug fix. |
| Bug ID | Fixed Issue |
| 228650 | Fixed an issue in which a custom installer built on a 32-bit OS using LabVIEW, LabWindows/CVI, or NI TestStand does not deploy NI-FGEN or its dependent user applications on a 64-bit OS. |
| Bug ID | Fixed Issue |
| 229602 | Fixed an issue with clock configuration that can cause memory corruption or blue screen with certain NI PXIe-5450 devices. |
| 212209 | Fixed an incorrect calibration DAC setting that could cause self-calibration to fail on the NI PXIe-5451. |
| Bug ID | Fixed Issue |
| 209051 | Fixed an issue in which the installer did not stop service nidevldu before upgrading binaries. |
| Bug ID | Fixed Issue |
| 179935 | Fixed a streaming issue on the NI PXIe-5442/5450. Streaming with certain combinations of chassis and controllers caused the device to return an invalid thermal error and detach itself from the system. You must upgrade your firmware for this solution. |
| 157714 | Fixed a memory leak that occurred when a session was opened and closed dynamically using VI server on LabVIEW Real-Time targets. |
| 118345 | Toggle markers are now allowed below 200 MS/s sample rates on the NI PXIe-5450. |
| 39796 | An error is now returned when PXI_STAR is used as a trigger source for the NI PXIe-5442. This configuration is not supported. |
| 118500 | The NI PXIe-5450 now supports the Oscillator Phase DAC property and NIFGEN_ATTR_OSCILLATOR_PHASE_DAC_VALUE attribute for external Sample clocks. |
Automating the Installation of NI Products
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8
Using NI Launcher
| Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
NI-FGEN Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows/CVI | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Legal Information
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.