石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-Serial 3.2 and Before Driver Win32/64Eng 美国国家仪器串口产品驱动3.2及之前版本

文章来源:石鑫华视觉网时间:2022-05-20 22:55:38 点击:748

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-Serial 3.2 and Before Driver Win32/64Eng 美国国家仪器串口产品驱动3.2及之前版本

NI-Serial为使用NI串口产品的客户提供支持。
NI-Serial驱动程序可最大限度提高CPU的利用率，无需改变波特率即可提高仪器的数据吞吐量。您也可使用较大型的先入先出存内存缓冲器(FIFO)来执行DMA传输，使NI-Serial接口以更高的速率发送和接收更大量的数据。

百度网盘下载和NI官方下载地址:
请注册登陆视觉论坛会员，购买附件查看，充值请联系在线客服
3.2版之前的版本，已经非常少人使用了。这里还包含了3.1、3.0、1.8、1.7.1、1.7、1.5、1.4、1.3、1.2、1.1等等。就算3.2亦只支持到Windows Vista和XP。属于非常老旧的版本。如确实有需要，请购买。不过现在估计这种古董应该没有了。

NI-Serial 3.2 and Before Driver Win32/64Eng 美国国家仪器串口产品驱动3.2及之前版本

http://pcmv.cn/thread-28737-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-Serial for Windows, Version 3.2

© 2007 National Instruments Corporation. All rights reserved.




Thank you for using NI-Serial for Windows, Version 3.2.

This file contains release notes, patent information, and last-minute information for NI-Serial for Windows. Some information in this file may be too recent to be included in the official documentation set.

The Readme contains the following main sections:

  • Release Notes

  • Supported Interfaces

PCI
PXI
USB
ENET
ExpressCard
PCMCIA
ISA

  • Enhancements in Version 3.2

  • Enhancements in Version 3.1

  • Enhancements in Version 3.0

  • Enhancements in Version 1.8

  • Problems after upgrading from Windows XP to Windows Vista

  • Deprecated Serial I/O Requests

  • Incorrect serial number displayed in Device Manager

  • CreateFile COM Name Issue

  • ENET Configuration Issues

  • Contacting National Instruments

  • Patent Information



Release Notes

NI-Serial for Windows, Version 3.2, is the latest driver offering from National Instruments. Every attempt has been made to maintain backward compatibility with the installed base of existing NI-Serial applications.

Supported Interfaces

NI-Serial for Windows, Version 3.2, supports the hardware listed below on Windows 2000/XP/Server 2003/Vista. If the hardware is also supported on Windows NT/Me/9x, the last released driver with support for that interface is listed.



PCI Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Vista,
Server 2003
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
PCI-8430/2
3.2
3.2
x
RS-232
2
No
1000.0
PCI-8430/4
3.2
3.2
x
RS-232
4
No
1000.0
PCI-8430/8
3.2
3.2
x
RS-232
8
No
1000.0
PCI-8430/16
3.2
3.2
x
RS-232
16
No
1000.0
PCI-8431/2
3.2
3.2
x
RS-485/422
2
No
3000.01
PCI-8431/4
3.2
3.2
x
RS-485/422
4
No
3000.01
PCI-8431/8
3.2
3.2
x
RS-485/422
8
No
3000.01
PCI-8432/2
3.2
3.2
x
RS-232
2
Yes
1000.0
PCI-8432/4
3.2
3.2
x
RS-232
4
Yes
1000.0
PCI-8433/2
3.2
3.2
x
RS-485/422
2
Yes
3000.01
PCI-8433/4
3.2
3.2
x
RS-485/422
4
Yes
3000.01
PCI-232/2
3.2
3.2
1.5
RS-232
2
No
115.2
PCI-232/4
3.2
3.2
1.5
RS-232
4
No
115.2
PCI-232/8
3.2
3.2
1.5
RS-232
8
No
115.2
PCI-232/16
3.2
3.2
1.5
RS-232
16
No
115.2
PCI-485/2
3.2
3.2
1.5
RS-485/422
2
No
460.8
PCI-485/4
3.2
3.2
1.5
RS-485/422
4
No
460.8
PCI-485/8
3.2
3.2
1.5
RS-485/422
8
No
460.8
PCI-232I/2
3.2
3.2
1.5
RS-232
2
Yes
115.2
PCI-232I/4
3.2
3.2
1.5
RS-232
4
Yes
115.2
PCI-485I/2
3.2
3.2
1.5
RS-485/422
2
Yes
460.8
PCI-485I/4
3.2
3.2
1.5
RS-485/422
4
Yes
460.8



PXI Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Vista,
Server 2003
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
PXI-8430/2
3.2
3.2
x
RS-232
2
No
1000.0
PXI-8430/4
3.2
3.2
x
RS-232
4
No
1000.0
PXI-8430/8
3.2
3.2
x
RS-232
8
No
1000.0
PXI-8430/16
3.2
3.2
x
RS-232
8
No
1000.0
PXI-8431/2
3.2
3.2
x
RS-485/422
2
No
3000.01
PXI-8431/4
3.2
3.2
x
RS-485/422
4
No
3000.01
PXI-8431/8
3.2
3.2
x
RS-485/422
8
No
3000.01
PXI-8432/2
3.2
3.2
x
RS-232
2
Yes
1000.0
PXI-8432/4
3.2
3.2
x
RS-232
4
Yes
1000.0
PXI-8433/2
3.2
3.2
x
RS-485/422
2
Yes
3000.01
PXI-8433/4
3.2
3.2
x
RS-485/422
4
Yes
3000.01
PXI-8420/2
3.2
3.2
1.5
RS-232
2
No
115.2
PXI-8420/4
3.2
3.2
1.5
RS-232
4
No
115.2
PXI-8420/8
3.2
3.2
1.5
RS-232
8
No
115.2
PXI-8420/16
3.2
3.2
1.5
RS-232
16
No
115.2
PXI-8421/2
3.2
3.2
1.5
RS-485/422
2
No
460.8
PXI-8421/4
3.2
3.2
1.5
RS-485/422
4
No
460.8
PXI-8421/8
3.2
3.2
1.5
RS-485/422
8
No
460.8
PXI-8422/2
3.2
3.2
1.5
RS-232
2
Yes
115.2
PXI-8422/4
3.2
3.2
1.5
RS-232
4
Yes
115.2
PXI-8423/2
3.2
3.2
1.5
RS-485/422
2
Yes
460.8
PXI-8423/4
3.2
3.2
1.5
RS-485/422
4
Yes
460.8



USB Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Vista,
Server 2003
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
USB-232
3.2
x
x
RS-232
1
No
230.4
USB-232/2
3.2
x
x
RS-232
2
No
230.4
USB-232/4
3.2
x
x
RS-232
4
No
230.4
USB-485
3.2
x
x
RS-485/422
1
No
460.8
USB-485/2
3.2
x
x
RS-485/422
2
No
460.8
USB-485/4
3.2
x
x
RS-485/422
4
No
460.8



ENET Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Vista,
Server 2003
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
ENET-232/2
3.2
x
1.01 (NT)
RS-232
2
No
230.4
ENET-232/4
3.2
x
1.01 (NT)
RS-232
4
No
230.4
ENET-485/2
3.2
x
1.01 (NT)
RS-485/422
2
No
460.8
ENET-485/4
3.2
x
1.01 (NT)
RS-485/422
4
No
460.8



ExpressCard Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Vista,
Server 2003
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
ExpressCard-8420/2
3.2
x
x
RS-232
2
No
230.4
ExpressCard-8421/2
3.2
x
x
RS-485/422
2
No
460.8



PCMCIA Interfaces
32-bit Windows
2000, XP, Vista,
Server 2003
64-bit Windows
XP, Server 2003
64-bit Windows
Vista
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
PCMCIA-232
3.2
3.2
x
1.5
RS-232
1
No
921.6
PCMCIA-232/2
3.2
3.2
x
1.5
RS-232
2
No
921.6
PCMCIA-232/4
3.2
3.2
x
1.5
RS-232
4
No
115.2
PCMCIA-485
3.2
3.2
x
1.5
RS-485/422
1
No
921.6
PCMCIA-485/2
3.2
3.2
x
1.5
RS-485/422
2
No
921.6
PCMCIA-2322
3.2
3.2
x
1.5
RS-232
1
No
115.2
PCMCIA-232/22
3.2
3.2
x
1.5
RS-232
2
No
115.2
PCMCIA-4852
3.2
3.2
x
1.5
RS-485/422
1
No
115.2
PCMCIA-485/22
3.2
3.2
x
1.5
RS-485/422
2
No
115.2



ISA Interfaces
32-bit Windows
2000, XP
64-bit Windows
XP, Vista
Windows
NT, Me, 9x
Standard
# Ports
Isolated
MAX Baud (kb/s)
ISA-232/22
3.1
x
1.5
RS-232
2
No
115.2
ISA-232/42
3.1
x
1.5
RS-232
4
No
115.2
ISA-485/22
3.1
x
1.5
RS-485/422
2
No
115.2
ISA-485/42
3.1
x
1.5
RS-485/422
4
No
115.2
ISA-232I/22
3.1
x
1.5
RS-232
2
Yes
115.2
ISA-232I/42
3.1
x
1.5
RS-232
4
Yes
115.2
ISA-485I/22
3.1
x
1.5
RS-485/422
2
Yes
115.2
ISA-485I/42
3.1
x
1.5
RS-485/422
4
Yes
115.2


1 The two-wire auto control mode for RS-485 transceiver control has a maximum baud rate of 2000 kb/s.
2 This hardware has been obsoleted but is still supported by NI-Serial for Windows


Enhancements in Version 3.2Add support for Windows Vista

NI-Serial 3.2 adds support for Windows Vista.  See Supported Interfaces for a list of supported hardware.

Enhancements in Version 3.1New hardware support for LabVIEW Real-Time

NI-Serial 3.1 adds support for cRIO, FieldPoint, and Compact Vision controllers on LabVIEW Real-Time.

Enhancements in Version 3.0New hardware support for LabVIEW Real-Time

NI-Serial 3.0 adds support for the PCI/PXI-843x family of hardware on LabVIEW Real-Time.

Enhancements in Version 1.8Support for Windows XP x64 and Windows Server 2003 x64

NI-Serial for Windows, Version 1.8, adds support for Microsoft Windows XP x64 and Windows Server 2003 x64 for all PCI, PXI, and PCMCIA interfaces.

Baud rates up to 3 Mb/s

NI-Serial for Windows, Version 1.8, adds support for custom baud rates up to 3 Mb/s on PCI/PXI-8431/8433 hardware. The two-wire auto control mode for RS-485 transceiver control has a maximum baud rate of 2 Mb/s.

New communication utility

NI-Serial for Windows, Version 1.8, includes a new serial communication utility. The Serial Communicator can be used to test serial hardware configuration and communication. The Serial Communicator is available in Measurement & Automation Explorer.

Problems after upgrading from Windows XP to Windows Vista

Windows Vista allows users to upgrade from Windows XP, including migration of installed programs.  NI-Serial should be uninstalled from Windows XP prior to upgrading to Windows Vista.   National Instruments serial hardware should also be removed before attempting to upgrade.
If you performed a Windows-XP-to-Windows-Vista upgrade without uninstalling your NI-Serial software and hardware first, please do not attempt to install, uninstall, or otherwise use your NI-Serial software.  Please visit ni.com/info, enter Info Code RDSIIS, and follow the instructions to repair your system.

Deprecated Serial I/O Requests

The following Serial I/O Requests were deprecated in Version 1.8:

  • Device I/O Control Request: SERIAL_IOCTL_SET_TRANSCEIVER_MODE

  • Major I/O Request: IRP_MJ_INTERNAL_DEVICE_CONTROL


Incorrect serial number displayed in Device Manager

If you swap one PCI/PXI serial card for another of the exact same type, the serial number shown in the device manager and MAX may not change.  This happens because Windows is unable to distinguish the old hardware from the new.  To fix this problem, delete the interface from the system and either scan for new hardware in the device manager or restart your computer.  This will force Windows to reinstall your hardware and the correct serial number should be displayed.   

CreateFile COM Name Issue

The "CreateFile" function from the Microsoft Win32 API will fail for port names COM10 and greater. To use these ports, and for the function to succeed, append the string "\\.\" before the port name. For example, to open COM10, use the string "\\.\COM10" for the port name. (This is because the full name of the port is actually \.COM10, and all ''-characters must be doubled per the C language syntax.)

ENET Configuration Issues

ENET-232 and ENET-485 devices are configured by default to use DHCP to acquire network parameters. If your network does not support DHCP, the Serial ENET's DHCP attempt will time out (after 90 seconds) and you will need to use the included NI Ethernet Configuration utility to assign static network parameters manually. In this case, it may be necessary for you to contact your network administrator for assistance. For more information regarding this utility, refer to the Serial Hardware and Software for Windows Help file.
If your network does support DHCP, and you are experiencing problems communicating with your device either with the hostname or are having difficulties with the Troubleshooting Wizard, you may have a problem with your DNS Server. There is a detailed explanation of this problem in the Serial Hardware and Software for Windows Help file in the "Using DHCP" and "Troubleshooting" sections.

Contacting National Instruments

Thank you for your interest in NI-Serial. We appreciate communicating with the people who use our products. We are also very interested in hearing about the applications you develop using our products. Our Web site, ni.com, provides advanced support and services and contact information.

Patent Information

For patents covering National Instruments products, refer to the appropriate location: Help>>;Patents in your software, the patents.txt file on your CD, or ni.com/patents.


首页
84162741QQ
联系