石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI IVI Compliance Package 4.5 Win32/64Eng NI IVI合规软件包4.5下载
IVI合规软件包
IVI Compliance Package包含IVI类驱动程序和支持库，用于开发和利用基于IVI互换性的应用程序。
IVI Compliance Package包含了IVI类驱动程序、仿真驱动程序和基于IVI的NI编程环境的应用案例。IVI Compliance Package基于IVI Foundation制定的最新仪器编程规范，并遵守该规范。IVI Compliance Package中的IVI类驱动程序可与专门IVI专用的驱动程序配合使用。
Win32/64Eng
4.5
文件大小: 175722602 字节 (167.58 MB)
修改日期: 2019-06-25 02:45
MD5: 15d98556712dc68292857f35fc712012
SHA1: 202b122ed0ccdbe0aa74193387f36c16706be9e4
SHA256: 35360c0968ab98f511b78978570462a0863506ad09d4b671f18b41804b4d619d
CRC32: 6b8276ed
百度网盘和NI官方下载地址：
NI IVI Compliance Package 4.5 Win32/64Eng NI IVI合规软件包4.5下载
http://pcmv.cn/thread-26036-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI IVI Compliance Package 4.5.0Readme File
Adds support for portable configuration in MAX (CAR 88902)
Updates IviFgen related components based on the latest IviFgen (5.0) specification changes (CARs 315778, 315785, 315782, 315779, 315786, 315787)
Contents
System Requirements
Windows 7 (32-bit or 64-bit), including Starter Edition (32-bit)
Windows Vista (32-bit or 64-bit)
Windows XP Service Pack 3 or later
Windows Server 2008 R2 (64-bit)
Windows Server 2003 R2 (32-bit)
Availability/Installation
If you plan to use IVI Compliance Package 4.5 with LabVIEW, and/or LabWindows/CVI, make sure that you have already installed LabVIEW version 2009 or later, and/or LabWindows/CVI version 7.1 or later.
For compatibility reasons, the IVI Compliance Package 4.5 installation process enables write permissions for the IVI Standard Root directories (defaults: Program FilesIVI FoundationIVI and Program Files(x86)IVI FoundationIVI) on Windows Vista and Windows 7 systems.
National Instruments recommends that you close all other applications before you install IVI Compliance Package 4.5.
Download the IVI Compliance Package 4.5 self-extracting archive from http://www.ni.com/downloads by navigating through the Drivers and Updates link.
Double-click the self-extracting archive to launch the installer.
Click OK to begin installation.
Follow the directions that appear on the screen.
Known Incompatibilities
As of IVI Compliance Package 3.1, the IVI Compliance Package distribution no longer includes LabWindows/CVI 6.0 support. Please refer to the Using LabWindows/CVI 6.0 With ICP 3.1 document for details.
The IVI Specific Driver Test Suite in LabWindows/CVI 2009 requires ICP 4.1 or later.
The IVI Specific Driver Test Suite in LabWindows/CVI 2010 SP1 or later requires ICP 4.5.
Installed Components
IVI class drivers
IVI class simulation drivers
IVI class driver LabWindows/CVI support
IVI class driver wrappers for LabVIEW 2009, 2010, 2011, and 2012
IVI class driver examples for LabWindows/CVI, LabVIEW, and Measurement Studio
IVI-COM adapters (32-bit only)
IVI Shared Components, version 2.2.1
IVI configuration plug-in for Measurement & Automation Explorer (MAX) 4.7.0 and later
Online help
Uninstall Considerations
Select Start»Settings»Control Panel»Add or Remove Programs.
Select National Instruments Software and click Change/Remove.
Select NI IVI Compliance Package 4.5 and click Remove.
Select Start»Settings»Control Panel»Add or Remove Programs.
Select IVI Shared Components and click Change/Remove.
Known Issues
When installing a user-built distribution configured for distribution media smaller than 200MB that includes a Modular Instruments Run-Time distribution, an installation error might occur. Please refer to KnowledgeBase 5CT96RW1: NI IVI Engine Installation Failure When Included in User-built Distribution for more information.
If IVI Shared Components 2.2.1 or later is already installed when the ICP 4.5 installer is run, the IVI Shared Components feature(s) in the feature tree will not be displayed.
Because it has a ViInt64 attribute, the IviDigitizer Class Driver function panel file is in the CVI 8.5 format, which is incompatible with LabWindows/CVI versions prior to 8.5. Due to a known issue in LabWindows/CVI 8.5, the Get/Set/Check Attribute function panels do not display the enumerated values in the "Attribute Value" field when the FP format is 8.5. To enter a value manually, you may press "Ctrl+T". Because of this known issue, CVI 9.0.1 or later is recommended for use with the IviDigitizer FP file.
In the IviFgen FP file, the Attribute ID and Attribute Value controls in the Get/Set/CheckAttributeViInt64 function display an empty field instead of a list of attributes and values. For more information, refer to KnowledgeBase 5WOA752F: Issue Setting IviFgen Attribute ID Using Get/Set/CheckAttributeViInt64 Functions.
In the IVI Configuration Utility in MAX, the DAQmx devices (both simulated devices and real devices) will appear in the Resource Descriptor list in the Hardware Assets table only if you have DAQmx 9.2 or later installed.
National Instruments IVI libraries, tools, and utilities support only single-byte character strings. You cannot use multi-byte characters, such as those commonly used in Chinese, Japanese, and Korean operating systems. Only single-byte characters, such as ASCII characters, may be passed to IVI function calls, used to set directory paths, and used to create entries in the MAX IVI Configuration Utility.
NI-Spy is now known as NI I/O Trace. Images in the National Instruments IVI Driver Help continue to reflect the NI-Spy name. However, the general functionality depicted in the images remains the same.
Important Information