Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW Modulation Toolkit 18.0 Win32/64Eng LabVIEW调制工具包2018
LabVIEW调制工具包
LabVIEW调制工具包为LabVIEW提供了调制信号生成和分析功能，适用于研究、设计、原型，验证和测试应用。
LabVIEW调制工具包是LabVIEW的一个软件附件，提供了用于生成、分析、处理和可视化模拟和数字调制信号的功能和工具。该工具包可让您使用各种调制方案（包括AM、FM、PM、ASK、FSK、MSK、PSK和QAM）对信号进行调制和解调。使用LabVIEW调制工具包，您可以执行信道编码、交织编码和均衡等等高级信号处理，也可以测量频率误差、误差矢量幅度(EVM)和误码率(BER)等参数，以验证信号质量。使用LabVIEW调制工具包，您还可以应用常见的信号减损，并通过星座图、眼图和网格图等可视化工具查看信号。
Win32/64Eng
18.0
文件大小: 640544792 字节 (610.87 MB)
修改日期: 2018-04-11 13:01
MD5: e996bf115f74c2110064fa6f858bb265（官方正确）
SHA1: d8b0c07ff4ac7cef667650f869fce19138df23b4
SHA256: 55ee3b519e45e0438a38f4c42be22762935d292d17ca18b8eb6d6d6fe04a8acc
CRC32: c0422151
百度网盘与NI官方下载地址：
LabVIEW Modulation Toolkit 18.0 Win32/64Eng LabVIEW调制工具包2018
http://pcmv.cn/thread-25974-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI LabVIEW Modulation Toolkit 18.0 Readme
March 2018
This file contains important information about the NI LabVIEW Modulation Toolkit and is organized into the following sections:
New Features
Supported Hardware
System Requirements
Installed Software, Documentation, and Examples
Documentation
Accessing VIs and Functions
Finding Examples
NI Software Support for Microsoft Windows 7, Windows Vista, Windows XP, and Windows Server 2003
Product Security and Critical Updates
Toolkit Version Naming Changes
Uninstalling/Modifying NI LabVIEW Modulation Toolkit
Known Issues
Bug Fixes
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
Legal Information
New Features
NI LabVIEW Modulation Toolkit 18.0 adds support for LabVIEW 2018 (32- and 64-bit)
NI LabVIEW Modulation Toolkit 17.0 adds support for LabVIEW 2017 (32- and 64-bit)
NI LabVIEW Modulation Toolkit 16.0 adds support for LabVIEW 2016 (32- and 64-bit)
Supported HardwareVector Signal Generators
NI PXI-5670
NI PXI-5671
NI PXIe-5672
NI PXIe-5673
NI PXIe-5673E
Device-specific information about these modules is included in the NI RF Signal Generators Help.
Arbitrary Waveform Generators
NI PXIe-5442
NI PXIe-5450
NI PXIe-5451
Vector Signal Analyzers
NI PXI-5660
NI PXI-5661
NI PXIe-5663
NI PXIe-5663E
NI PXIe-5665
NI PXIe-5668R
Device-specific information about these modules is included in the NI RF Vector Signal Analyzers Help.
Vector Signal Transceivers
NI PXIe-5644R
NI PXIe-5645R
NI PXIe-5646R
Device-specific information about these modules is included in the NI RF Vector Signal Transceivers Help.
Digitizers
NI PXI-5621
NI PXI-5620
NI PXI-5122
NI PXI-5124
NI PCI-5122
NI PCI-5124
NI PXI-5922
NI PXI-5142
NI PXIe-5122
NI PXIe-5622
Device-specific information about these modules is included in the NI High-Speed Digitizers Help.
System RequirementsSupported Operating Systems
NI LabVIEW Modulation Toolkit 18.0 supports the following operating systems:
Windows 10/8.11/7 SP12 (32-bit and 64-bit)
Windows Server 2012 R21 (64-bit)
Windows Server 2008 R2 SP12 (64-bit)
1 NI software installs VC2015 Runtime and .NET 4.6.1. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note NI LabVIEW Modulation Toolkit 18.0 and later does not support Windows Server non-R2 editions.
NI recommends that you have the most recent service pack for your operating system installed.
Supported Real-Time Operating Environments
NI LabVIEW Modulation Toolkit 18.0 and later supports the following real-time operating environments:
Minimum Requirements
Processor—1 GHz or faster 32-bit (x86) or 64-bit (x64) processor
RAM—1 GB RAM (32-bit) or 2 GB RAM (64-bit)
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
Recommended System
Processor—Intel Core i5 or equivalent
RAM—4 GB
A screen resolution of 1,024 x 768
Windows 10/8.1/7, with all available critical updates and service packs
If your application runs on an RT target, NI recommends that you have at least 128 MB of RAM
Note Instrument drivers are not required for NI LabVIEW Modulation Toolkit operation in simulation mode. However, the toolkit installs examples for the supported drivers if they are present on the system.
Application Development Environments (ADEs)
Note You should install ADEs, such as NI LabVIEW before installing NI LabVIEW Modulation Toolkit. To add support for ADEs installed after installing NI LabVIEW Modulation Toolkit, modify your NI LabVIEW Modulation Toolkit installation or launch the NI LabVIEW Modulation Toolkit installer again.
NI LabVIEW 2015 SP1, 2016, 2017 SP1, or 2018
NI LabVIEW Real-Time Module 2015 SP1, 2016, 2017, or 2018
If your application runs on an RT target, NI recommends that you have at least 128 MB of RAM
Installed Software, Documentation, and ExamplesInstalled Software
File Locations
| Item | Installed Location |
| VIs | <labVIEW> i.libddonsModulation |
| Examples | <labVIEW>examplesModulation |
Documentation
Documentation for NI LabVIEW Modulation Toolkit 18.0 is located at Start»All Programs»National Instruments»Modulation Toolkit»Modulation Toolkit Documentation. The documentation set is composed of the following documents.
| Document | Format | Description |
| NI LabVIEW Modulation Toolkit Help | HTML/Windows Help | Information about NI LabVIEW Modulation Toolkit product. The help is an HTML version of a traditional user manual that includes the following information: |
| NI LabVIEW Modulation Toolkit Readme | HTML (this document) | Information about supported hardware and operating systems, new features, fixed issues, and legal notices. |
For the most recent revisions of documentation and for newly released documentation, visit ni.com/manuals.
Accessing VIs and Functions
NI LabVIEW Modulation Toolkit palette VIs are available from the Functions»RF Communications»Modulation palette.
Finding Examples
In LabVIEW, you can use the NI Example Finder to search or browse examples. NI LabVIEW Modulation Toolkit examples are classified by keyword, so you can search for a particular device or measurement function. In LabVIEW, select Help»Find Examples to launch the NI Example Finder. The NI Example Finder offers two ways to access all installed LabVIEW example VIs (including NI–RFSG and NI LabVIEW Modulation Toolkit examples) and their descriptions:
Click the Browse tab to locate modulation examples by task at Toolkit and Modules»Modulation or by directory structure at Modulation.
Click the Search tab to search all installed examples by keyword. For example, search for "Modulation" to locate all NI LabVIEW Modulation Toolkit examples.
You can also access all the installed NI LabVIEW Modulation Toolkit examples for LabVIEW at Start»All Programs»National Instruments»Modulation Toolkit»Modulation Toolkit Examples.
Examples also are available online that demonstrate integrating NI RF signal generators with NI RF signal analyzers and NI toolkit software including the NI LabVIEW Modulation Toolkit. Refer to ni.com/examples for these examples and for more information.
NI LabVIEW Modulation Toolkit 18.0 Drops Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
With this release, NI LabVIEW Modulation Toolkit drops support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI LabVIEW Modulation Toolkit 18.0 and later will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI LabVIEW Modulation Toolkit 18.0 to an unsupported OS. Additionally, after installing NI LabVIEW Modulation Toolkit 18.0, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2018, refer to KB 79UC78LS, Why Does my LabVIEW, LabWindows/CVI, Measurement Studio, or TestStand Built Installer Fail on Windows XP/Vista and Server 2003?.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Toolkit Version Naming Changes
NI LabVIEW Modulation Toolkit versions are now aligned with the versions of major NI application software products. This alignment gives you information about the year the toolkit was released and the most recent software version the toolkit was designed to work with. Toolkit versions now start with a two-digit year indicator: <ProductName><Year-BasedVersion>. For example, NI LabVIEW Modulation Toolkit 18.0 is the version released with LabVIEW 2018. The last version released under the old numbering scheme is NI LabVIEW Modulation Toolkit 4.4. The first version released under the new numbering scheme is NI LabVIEW Modulation Toolkit 15.0.
Uninstalling/Modifying NI LabVIEW Modulation Toolkit
For Windows 7, complete the following steps:
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI LabVIEW Modulation Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
For Windows 10/8.1, complete the following steps:
Right-click on the Start button.
Select Control Panel.
Select Programs»Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI LabVIEW Modulation Toolkit 18.0 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Note Do not attempt to uninstall by manually deleting files.
Known Issues
You can access the software and documentation known issues list online. Refer to the NI LabVIEW Modulation Toolkit 18.0 Known Issues at ni.com for an up-to-date list of known issues in NI LabVIEW Modulation Toolkit 18.0.
Bug Fixes
The following items are the IDs and titles of a subset of issues fixed in the NI LabVIEW Modulation Toolkit. This is not an exhaustive list of issues fixed in the current version of the NI LabVIEW Modulation Toolkit. If you have a CAR ID, you can search this list to validate that the issue has been fixed.
The following items are changes in NI LabVIEW Modulation Toolkit 15.0 from NI LabVIEW Modulation Toolkit 4.4.
| ID | Fixed Issue |
| 521869 | Fixed an issue where the MT examples for NI-Scope had an NI-RFSA dependency. |
| 525695 | Fixed an issue where OQPSK intermittently reported NaN as the result for the I/Q Gain Imbalance and the Quadrature Skew measurements. |
| 508707 | Fixed an issue where intermittent loss of samples occurred during continuous digital demodulation. |
The following items are changes in NI LabVIEW Modulation Toolkit 4.4 from NI LabVIEW Modulation Toolkit 4.3.4.
| ID | Fixed Issue |
| 389508 | Fixed DWarn 0x262C7578. |
| 402017 | Fixed an issue where MSK demodulation returned a high EVM. |
| 462305 | Fixed an issue where MSK recovered an incorrect constellation when the pulse shaping filter was set to None. |
| 362507 | Fixed an issue where installing MT 4.3.3 did not install the digital modulation related files on LabVIEW 2012. |
| 404991 | Fixed an issue where controls could not be created for the Modulation Toolkit classes. |
| 415930 | Fixed an issue where the OQPSK demodulation did not lock to the constellation consistently. |
| 426459 | Fixed an issue where EVM variations were observed in 8-PSK and 16-PSK demodulation. |
The following items are changes in NI LabVIEW Modulation Toolkit 4.3.4 from NI LabVIEW Modulation Toolkit 4.3.3.
| ID | Fixed Issue |
| 362507 | Fixed an issue where installing NI LabVIEW Modulation Toolkit 4.3.3 did not install Digital Modulation Toolkit VIs on LabVIEW 2012. |
| 374121 | Fixed an issue where NI LabVIEW Modulation Toolkit did not install on LabVIEW 2012. |
| 404822 | Fixed an issue where multiple shortcuts to documents were present in the Start Menu folder for the NI LabVIEW Modulation Toolkit. |
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:
For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, How Do I Automate the Installation of a Suited Installer?.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My NI Installer?.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install National Instruments software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Legal Information
Copyright
© 2002–2018 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375435D-01
