Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW Biomedical Toolkit 2013 Win32Eng LabVIEW生物医学工具包2013版下载
LabVIEW生物医学工具包
The LabVIEW Biomedical Toolkit helps you perform biomedical data acquisition and signal processing.
The LabVIEW Biomedical Toolkit is a software add-on that provides tools designed to simplify the use of LabVIEW software in physiological data acquisition, signal processing, and image processing. The add-on includes a multichannel Biosignal Datalogger for streaming biosignals to disk for playback and analysis. Other features include the File Viewer, File Conversion Utility for the Technical Data Management Streaming (TDMS) format, Biosignal Generator, ECG Feature Extractor, and more. The LabVIEW Biomedical Toolkit can be used with the NI Engineering Laboratory Virtual Instrumentation Suite (NI ELVIS) as well as most CompactDAQ controllers and modules. The add-on requires the LabVIEW Advanced Signal Processing Toolkit to also be instalLED on your development machine.
2013
文件大小: 567292704 字节 (541.01 MB)
修改日期: 2013-08-06 02:18
MD5: f5e3c6ef061edf1a8bd2ae2346611100（官方一致）
SHA1: b722c570b603d3c24ad40d917143f18f39c80b05
SHA256: 995f09ea7d87f2db4bb4ad67d8d5e6af6b7f321253cb6499385e19dd3cc5f040
CRC32: e7333818
百度网盘和NI官方下载地址：
LabVIEW Biomedical Toolkit 2013 Win32Eng LabVIEW生物医学工具包BMTK2013版下载
http://pcmv.cn/thread-25723-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2013 Biomedical Toolkit Readme
Version 13.0.0
June 2013
This file contains important information about the LabVIEW Biomedical Toolkit, including system requirements, installation instructions, and known issues.
Overview
New Features and Changes
System Requirements
Installation Instructions
Known Issues
Accessing the Help
Finding Examples
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8
NI LabVIEW Biomedical Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Overview
The LabVIEW Biomedical Toolkit includes tools that you can use to acquire, preprocess, extract, and analyze biosignals and biomedical images. By using the Biomedical Toolkit with National Instruments DAQ hardware, you can set up a system for learning signal processing techniques in bioinstrumentation. You can use different signal processing methods in research and academic projects related to biomedical engineering and other biomedical fields.
The Biomedical Toolkit also includes the Biomedical Workbench that provides applications for biosignal and biomedical image analysis. Refer to the Biomedical Workbench Readme, accessible by opening the readme_BIOWB.html in the root directory of the Biomedical Toolkit installer, for important information about the Biomedical Workbench.
New Features and Changes
The 2013 release of the Biomedical Toolkit includes two new VIs:
The 2013 release of the Biomedical Toolkit includes the following changes:
RT Target Support
Note The Biomedical File I/O Express VIs and the Medical Image Processing VIs do not support real-time applications.
Read Image Express VI and Write Image Express VI
Read and write RGB/RGB(alpha) .bmp, .jpeg, and .png files
Read and write multi-frame DICOM images
Read and write DICOM tags with specified tag names, group, and IDs
Read images from DICOMDIR/IMGDIR
Save multiple 2D slices to an IMGDIR
Read Biosignal Express VI and Write Biosignal Express VI
ECG Feature Extractor VI
Medical Image 2D Viewer
Render color images
Zoom, move, and drag 3D image arrays
Automatically detect image orientation from DICOM tags
Biosignal Simulation Express VIs
System Requirements
In addition to the system requirements for the LabVIEW Development System, the Biomedical Toolkit has the following requirements:
LabVIEW 2013 Full or Professional Development System (32-bit)
NI-DAQmx 9.7.5 or later (required only if you use National Instruments DAQ hardware with the Biomedical VIs)
At least 500 MB of disk space
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2013.
Installation Instructions
Double-click the setup.exe file in the root directory of the Biomedical Toolkit installer and follow the instructions on the screen to install the Biomedical Toolkit.
Biomedical Toolkit Updates and Notifications
National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Biomedical Toolkit.
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help from LabVIEW, for information about the Biomedical Toolkit.
Finding Examples
Select Help»Find Examples from LabVIEW to launch the NI Example Finder. LabVIEW examples for the Biomedical Toolkit are located in the labviewexamplesBiomedical directory. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8
When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.
NI LabVIEW Biomedical Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments LabVIEW Biomedical Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the Biomedical Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Important Information
Copyright
© 2012–2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
Biomedical Workbench 2013 Readme
Version 13.0.0
June 2013
This file contains important information about the Biomedical Workbench, including system requirements, installation instructions, and known issues.
Overview
New Features and Changes
System Requirements
Installation Instructions
Known Issues
Accessing the Help
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8
NI LabVIEW Biomedical Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
Overview
The Biomedical Workbench provides applications for biosignal and biomedical image analysis. You can use these applications to log and play biosignals, simulate and generate biosignals, analyze biosignals, and view biomedical images. The Biomedical Workbench also provides an interface for loading LabVIEW VIs to customize the analysis method to use. Use the Biomedical Workbench to set up biosignal loggers and basic biomedical measurement systems.
New Features and Changes
The 2013 release of the Biomedical Workbench includes two new applications:
Biosignal File Manager
Preview supported biosignal files and manage biosignal files in virtual libraries. The Biosignal File Manager supports more than 20 file types, including TDMS, Physiobank, and EDF.
Biosignal Calibrator
The 2013 release of the Biomedical Workbench includes the following changes:
System Requirements
The computer you are using must meet the following minimum system requirements to run the Biomedical Workbench:
You can run the Biomedical Workbench on the following operating systems:
Windows 8/7/Vista (32-bit and 64-bit)
Windows XP SP 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
Note: The Biomedical Workbench does not support Windows 2000/NT/Me/98/95 or Windows XP x64.
Installation Instructions
Double-click the setup.exe file in the root directory of the Biomedical Toolkit installer and follow the instructions on the screen to install this product.
Biomedical Workbench Updates and Notifications
National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the Biomedical Workbench.
Accessing the Help
Click the Detail Info button in the Biomedical Workbench to display introductory information about the Biomedical Workbench. Click the Help button in each application to access detailed information about the application.
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2013 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
How to Use NI Software with Microsoft Windows 8
When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.
NI LabVIEW Biomedical Toolkit Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
National Instruments LabVIEW Biomedical Toolkit will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of the Biomedical Toolkit that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows™/CVI™ | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Important Information
Copyright
© 2012–2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
