Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI Linux RT System Image 20.6 Win32/64Eng NI Linux实时系统映像2020.12
NI Linux RT System Image
在大多数NI实时控制器上运行NI Linux实时操作系统都需要借助NI Linux RT System Image。
NI Linux RTSystem Image是一款实用软件，其中包含的系统映像可用于格式化和配置大部分NI实时控制器，使控制器能够运行NI Linux Real-Time操作系统。如果要将最新的驱动程序安装到PXI控制器，需要先更新系统映像。注册商标Linux的使用获得了Linus Torvalds专属授权商LMI的再授权，Linus Torvalds拥有Linux注册商标在全球范围内的所有权。
20.6~2020.12
文件大小: 600057856 字节 (572.26 MB)
修改日期: 2020-09-14 05:00
MD5: 71c028fabadfef9342c1c63a63262f84（官方正确）
SHA1: d7215bdd463c8ecc35624df6d3f3ecd1834b2937
SHA256: e3bf36667c34e598fd89b4e1580b597117c7f728bcf48a2a628ccc2f9fc071e4
CRC32: e70a1557
百度网盘和NI官方下载地址：购买以下附件查看
NI Linux RT System Image 20.6 Win32/64Eng NI Linux实时系统映像2020.12
http://pcmv.cn/thread-25953-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI Linux RT System Image 20.6 Readme
December 2020
This document contains the following important information about NI Linux RT System Image:
System Requirements
Supported Operating Systems
Application Software Support
Installation Instructions
Product Security and Critical Updates
New Features
Supported Hardware and Software
LabVIEW NXG Support and Considerations
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Linux RT System Image Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
Legal Information
System Requirements
Installing NI Linux RT System Image 20.6 should meet the requirements for LabVIEW and the LabVIEW Real-Time Module. Refer to the LabVIEW 2020 Platform Readme and LabVIEW 2020 Real-Time Module Readme for more information.
Supported Operating Systems
NI Linux RT System Image 20.6 supports the following operating systems:
1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.
2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.
Note In 2016, NI dropped support for Windows Vista, Windows XP, Windows Server 2003, and installations of Windows 7 without any service packs. NI Linux RT System Image 20.6 will not install or run on an unsupported OS. You cannot deploy or distribute applications that use NI Linux RT System Image 20.6 to an unsupported OS. Additionally, after installing NI Linux RT System Image 20.6, you cannot use any installers built on this computer with any version of LabVIEW, LabWindows™/CVI™, NI TestStand™, or Measurement Studio on an unsupported OS.
For more information about the changes to our OS support for 2016, refer to Why Does My NI ADE Installer Fail on Windows XP/Vista and Windows Server 2003?.
Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/r/PAESupport.
Application Software Support
NI Linux RT System Image 20.6 supports the following application software versions, including service packs.
Application Software | Versions Supported |
| LabVIEW | LabVIEW 2020
LabVIEW 2019 SP1 |
| LabVIEW NXG | 5.1 |
Installation Instructions
Complete the following steps to install NI Linux RT System Image 20.6 for use with LabVIEW. Refer to the Supported Hardware and Software section to confirm which software versions support your specific hardware devices.
Install one of the supported versions of application software you will be using. Refer to Application Software Support for a list of which software versions NI Linux RT System Image 20.6 supports.
Install NI Linux RT System Image 20.6.
Configuring RT Targets
Use NI MAX to configure RT targets and to install software and drivers on targets. You can install NI MAX from the NI Package Manager or the LabVIEW Platform media.
(Networked RT Targets) Refer to the Remote Systems book in the Measurement & Automation Explorer Help, available by selecting Help»MAX Help from MAX, for information about configuring networked RT targets.
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.
New Features
Supported Hardware and SoftwareSupported Software
Supported HardwareCompactDAQ Controller
cDAQ-9132
cDAQ-9133
cDAQ-9134
cDAQ-9135
cDAQ-9136
cDAQ-9137
CompactRIO Controller
cRIO-9030
cRIO-9031
cRIO-9032
cRIO-9033
cRIO-9034
cRIO-9035
cRIO-9035 Sync
cRIO-9036
cRIO-9037
cRIO-9038
cRIO-9039
cRIO-9039 Sync
cRIO-9040
cRIO-9041
cRIO-9042
cRIO-9043
cRIO-9045
cRIO-9046
cRIO-9047
cRIO-9048
cRIO-9048 (TPM)
cRIO-9049
cRIO-9053
cRIO-9054
cRIO-9055
cRIO-9056
cRIO-9057
cRIO-9058
cRIO-9063
cRIO-9064
cRIO-9065
cRIO-9066
cRIO-9067
cRIO-9068
CompactRIO Single-Board Controller
sbRIO-9607
sbRIO-9627
sbRIO-9637
sbRIO-9651
sbRIO-9603
sbRIO-9608
sbRIO-9609
sbRIO-9628
sbRIO-9629
sbRIO-9638
Academic
NI ELVIS RIO CM
NI ELVIS III
CompactRIO Chassis
Controller for FlexRIO
PXI Hardware
Refer to NI Linux Real-Time Operating System PXI Hardware Support for support information for your PXI hardware.
USRP Software Defined Radio Stand-Alone Device
LabVIEW NXG Support and Considerations
The following sections detail considerations for using LabVIEW NXG 5.1 with NI Linux RT System Image 20.6.
LabVIEW NXG Operating Systems and System Requirements
Software support for LabVIEW NXG differs in the following ways:
LabVIEW NXG Hardware Support
NI Linux RT System Image 20.6 supports the following devices in LabVIEW NXG 5.1.
CompactRIO Controller
cRIO-9040
cRIO-9041
cRIO-9042
cRIO-9043
cRIO-9045
cRIO-9046
cRIO-9047
cRIO-9048
cRIO-9048 (TPM)
cRIO-9049
cRIO-9053
cRIO-9054
cRIO-9055
cRIO-9056
cRIO-9057
cRIO-9058
USRP Software Defined Radio Stand-Alone Device
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.
If the NI product you are installing uses Microsoft .NET 4.6.2, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.6.2 separately before you install NI software.
For more information about automating the installation of NI products, refer to Automating an Installer in the NI Package Manager manual.
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
NI Linux RT System Image Drops Support for Windows 7 (32- and 64-Bit), Windows Server 2008 R2, and All 32-Bit Windows Operating Systems in 2021
NI Linux RT System Image will drop support for Windows 7 (32- and 64-bit), Windows Server 2008 R2, and all 32-bit Windows operating systems starting in 2021. Versions of this product that ship after May 1, 2021, may not install or execute correctly on these operating systems. For detailed information about NI operating system support, visit ni.com/r/win32bitsupport.
For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows/CVI | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Legal Information
Copyright
© 1999–2020 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the NI Alliance Partner Program are business entities independent from NI and have no agency, partnership, or joint-venture relationship with NI.
Patents
For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.
378395B-01
