下载中心

LabVIEW 2011SP1 Mobile Module Win32Eng LabVIEW移动模块2011SP1版下载

文章来源:石鑫华视觉网时间:2022-05-16 12:18:34 点击:420

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW 2011SP1 Mobile Module Win32Eng LabVIEW移动模块2011SP1版下载

2011SP1
文件大小: 423189088 字节 (403.58 MB)
修改日期: 2012-01-14 05:02
MD5: d7f49f9cc96faad9158433cf1a1aeaed（可秒传）
SHA1: fd3957516d2eefa248ca86a99ea108a9f6e9fae5
SHA256: dfb5ab80d2877b73eec9424e64ae2034a284976bd195f7b655e0e483e50e8182
CRC32: 1f246a7d

百度网盘和NI官方下载地址：

http://pcmv.cn/thread-25484-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

LabVIEW 2011 Mobile Module Readme

Version 11.0

June 2011

This file contains important last-minute information about the LabVIEW 2011 Mobile Module, including installation issues.

System Requirements
Supported Operating Systems
Installing the Mobile Module
Known Issues
Bug Fixes
Resources
Important Information

Important Note to Customers

National Instruments is discontinuing production and support for the Mobile Module. LabVIEW 2011 Mobile Module is the final version. For existing users of the Mobile Module, National Instruments will continue to offer extended support for this module according to the guidelines found in the NI LabVIEW Lifecycle Policy.

System Requirements

The Mobile Module has the following system requirements:

LabVIEW 2011 Base, Full, or Professional Development System (32-bit)
2.5 GB available disk space
A Mobile device running Windows Mobile 5.0, Windows Mobile 6.0, or Pocket PC 2003
Note Refer to the KnowledgeBase at ni.com for more information about additional software requirements and supported devices for Windows Mobile and Pocket PC.

Supported Operating Systems

The Mobile Module supports the following operating systems:

Windows 7 (32-bit)
Windows Vista (32-bit)
Windows XP Service Pack 2 or later (32-bit)
Windows Server 2003 R2 (32-bit)

The Mobile Module does not support Windows NT/Me/98/95/2000, Windows Server non-R2 editions, or the Windows Server 2008 R2 edition.

Installing the Mobile Module

You can install all of your LabVIEW products—including the Mobile Module—using the LabVIEW 2011 Platform DVDs. You can find installation instructions for the Mobile Module along with activation instructions in the following locations:

LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2011 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.

To request additional LabVIEW 2011 Platform DVDs, refer to the National Instruments Web site.

Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Additional Installation Information

This section contains information that you might find helpful as you install the Mobile Module.

The Mobile Module runs in evaluation mode if you do not activate it. In evaluation mode, you can create VIs, but any Mobile applications you build run only for five minutes. You have the option of activating the Mobile Module during the installation process. You also can use the NI License Manager, available by selecting Start»All Programs»National Instruments»NI License Manager, to activate National Instruments products. Refer to the National Instruments License Manager Help, available by selecting Help»Contents in the NI License Manager, for more information about activating NI products.
The Mobile Module includes Microsoft tools, such as Microsoft ActiveSync on Windows XP. Some of these Microsoft tools might interfere with any existing installations of Visual Studio, Windows Embedded, or Windows CE toolkits.
(Windows XP) The Mobile Module installs ActiveSync 4.2 if you do not already have ActiveSync 4.2 or later installed. The Mobile Module works with ActiveSync 4.2 or later.
(Windows Vista/7) You must install Windows Mobile Device Center to use the Mobile Module. Refer to the Microsoft Web site at www.microsoft.com to download Windows Mobile Device Center.
(Windows Vista/7) If you are using the LabVIEW Mobile Module on Windows Vista or Windows 7 operating systems, you need to install Virtual PC 2007 to debug your application on the emulator. Refer to the Microsoft Web site at www.microsoft.com to download Virtual PC 2007.
You might need to install the additional tools, such as NI-DAQmxBase, PNG image support, Shared Variable support, WIDCOMM Bluetooth DLLs, LabVIEW SMS client, NI-VISA, or Windows Mobile Emulators to use the Mobile Module. Refer to the Installing Additional Tools section of the Getting Started with the LabVIEW Mobile Module manual for more information about additional tools.
Note The LabVIEW 2011 Mobile Module includes a new version of the LabVIEW Short Message Service (SMS) Client. Mobile applications built in LabVIEW 2010 Module Module and earlier are not compatible with this new version of the SMS Client. You must install and run the LabVIEW SMS Client, which is located in labviewPDAUtilitiesSMSdeviceSetup.exe, on the host computer to receive SMS messages.

Uninstalling the Mobile Module

If you uninstall the Mobile Module, you also must uninstall the following:

(Windows XP) Microsoft ActiveSync
(Windows Vista/7) Windows Mobile Device Center
Microsoft Device Emulator version 1.0 – ENU
Microsoft Visual C++ 2005 Redistributable

Notice Regarding Microsoft Silverlight Installation and RedistributionInstalling Microsoft Silverlight

Some NI components require Microsoft Silverlight. If you do not have Silverlight installed on your computer, but you do have Internet access, you can download the installer from Microsoft at http://www.microsoft.com/silverlight/. If you do not have Internet access, you can install Silverlight from this NI distribution media.

Using Microsoft Silverlight

You may not use any H.264/MPEG-4 AVC and/or VC-1 technology or codecs included in or with Microsoft Silverlight software which may be provided by NI as Third Party Software, including for the purpose of encoding or decoding video in compliance with, or making use of, the H.264/AVC visual standard or the VC-1 video standard.

Redistribution of Microsoft Silverlight

If you create and distribute software applications that contain NI components that also use Microsoft Silverlight, you may be authorized to include Silverlight in installers or on physical media as long as you comply with certain requirements. Refer to the notice.txt file in the <National Instruments>_Legal InformationMicrosoft Silverlight 4.0 directory or the NI standard End User License Agreement (EULA) located in the <National Instruments>CommonMDFEULADepotNIReleased directory for more information.

Known Issues

Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2011 Mobile Module.

Bug Fixes

Refer to the National Instruments Web site for an up-to-date list of fixed issues in the LabVIEW 2011 Mobile Module.

Resources

LabVIEW includes extensive online and PDF documentation for new and experienced LabVIEW users. Refer to the Related Documentation section in the Getting Started with the NI LabVIEW Mobile Module manual for more information about LabVIEW documentation. Visit the National Instruments Web site at ni.com for software drivers and updates, a searchable KnowledgeBase, product manuals, step-by-step troubleshooting wizards, thousands of example programs, tutorials, application notes, instrument drivers, and so on.

Important Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

LabVIEW 2011SP1 Mobile Module Win32Eng LabVIEW移动模块2011SP1版下载