石鑫华视觉 手机微信QQ:13450001061

下载中心

LabVIEW 2010 Jitter Analysis Toolkit Win32Eng LabVIEW抖动分析工具包2010版下载

文章来源:石鑫华视觉网时间:2022-05-16 12:05:25 点击:280

Windows系统下(Linux和MAC系统下请自行了解清楚)NI的各种软件、模块、工具包、驱动程序,使用NI许可证管理器来激活的,绝大部分的都可以使用NI Lincense Activator来激活,以下链接可下载:
NI序列号Serial Number生成激活工具NI License Activator,LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源,除了视觉相关的模块有使用外,大部分的都不会使用,所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址,那视觉论坛也没有办法,只能尝试使用百度网盘地址下载;如果百度网盘的下载地址失效过期,可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好,有些时候速度很慢或大的资源下载很容易出错,这样会造成安装过程各种类型报错而无法安装。建议在下载完成后,对下载资源做校验和验证(NI一般会提供MD5或SHA256等),与官方或视觉论坛提供的校验和对比,一致就可以安装,如果不一致,则需要重新下载。视觉论坛早期下载的资源,那时候NI没有这么多限制,基本上都是正常下载的资源;后期下载的资源,都与NI的正确校验和对比过,保证是正确的资源才上传到百度网盘,所以百度网盘的资源基本上是正确的。校验和工具下载地址:
文件Hash计算器FHash,文件校验和验证下载文件正确性验证,MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

LabVIEW 2010 Jitter Analysis Toolkit Win32Eng LabVIEW抖动分析工具包2010版下载

LabVIEW抖动分析工具包
LabVIEW抖动分析工具包可帮助您使用示波器或数字化仪自动执行测试测量。
LabVIEW抖动分析工具包是LabVIEW的一款软件附件,提供了一个函数库,可用于在自动化验证和生产测试环境中执行高吞吐量的抖动、眼图和相位噪声测量。该附件支持眼图模板定义和模板极限测试(mask limit),而且如果使用的是多核机器,该附件可以加速线程安全测量。您可以创建和显示眼图和浴盆曲线。LabVIEW抖动分析工具包适用于使用第三方示波器和数字化仪或者PXI IF数字化仪、PXI示波器、C系列数字化仪模块等NI硬件的测试系统。此外,该附件还提供眼图、模板(mask)测试和随机抖动/确定性抖动(RJ/DJ)分离相关的示例程序。

2010
文件大小: 109058656 字节 (104.01 MB)
修改日期: 2011-01-14 23:18
MD5: f0c96f89561e727f00d6a5a3da643f7c(官方正确)
SHA1: 8a50677b5a90ea9cc683a1d58353836c5c09f046
SHA256: b171ecdcdaa97c6553c082cf7f23191938ff91586646d6883177a2f7c3659507
CRC32: 3cc9b030

百度和NI官方下载地址:

LabVIEW 2010 Jitter Analysis Toolkit Win32/64Eng LabVIEW抖动分析工具包2010版下载

http://pcmv.cn/thread-25478-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



LabVIEW 2010 Jitter Analysis Toolkit Readme

Version 10.0.0
December 2010
This file contains information to introduce you to the LabVIEW 2010 Jitter Analysis Toolkit. This file also contains important last-minute information about the toolkit, including system requirements, installation instructions, and known issues.

Overview
System Requirements
Installation Instructions
Accessing the Toolkit and Help
Finding Examples
Known Issues

Overview

The LabVIEW Jitter Analysis Toolkit provides a library of VIs optimized for performing high-throughput, automated jitter, eye diagram, and phase-noise measurements. The toolkit is hardware-independent and can be used with NI high-speed and high-resolution digitizers as well as third-party oscilloscopes/digitizers.

System Requirements

In addition to the system requirements for the LabVIEW Development System, the Jitter Analysis Toolkit has the following requirements:
  • LabVIEW 2010 or later Full or Professional Development System

  • At least 150 MB of disk space

Refer to the LabVIEW Release Notes, which are available in your LabVIEW software kit or on the National Instruments Web site, for additional system requirements and supported operating systems for LabVIEW 2010 and related service packs.
(LabVIEW 64-bit) The Jitter Analysis Toolkit is not supported in LabVIEW (64-bit).

Installation Instructions

You can install all of your LabVIEW products—including the Jitter Analysis Toolkit—using the LabVIEW Platform DVDs. You can find installation instructions for the toolkit along with activation instructions in the following locations:
  • LabVIEW Release Notes, which are available in your LabVIEW software kit.

  • LabVIEW Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.

To request additional LabVIEW Platform DVDs, refer to the National Instruments Web site.
Note: If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.

Accessing the Toolkit and Help

To access the Jitter Analysis Toolkit VIs, select View»Functions Palette from the block diagram in LabVIEW and navigate to the Addons»Jitter Analysis palette. You also can right-click any blank space on the block diagram to display the Functions palette.
Refer to the Toolkits»Jitter Analysis VIs book on the Contents tab of the LabVIEW Help for more information about the Jitter Analysis Toolkit.

Finding Examples

Refer to the labviewexamplesJitter Analysis directory for LabVIEW examples for the Jitter Analysis Toolkit. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Jitter Analysis Toolkit.

Important Information

Copyright
© 2010 National Instruments Corporation. All rights reserved.
For copyright notices, conditions, and disclaimers, including information regarding certain third-party components used in the LabVIEW Jitter Analysis Toolkit, refer to the Copyright topic of the LabVIEW Help.
Trademarks
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at ni.com/trademarks for other National Instruments trademarks.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系