石鑫华视觉 手机微信QQ:13450001061 / 18038383457

下载中心

NI-Industrial Communications for EtherCAT 2.6 Win32/64Eng 以太网控制自动化技术工业通信软件2.6版下载

文章来源:石鑫华视觉网时间:2022-05-13 14:37:52 点击:321

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-Industrial Communications for EtherCAT 2.6 Win32/64Eng 以太网控制自动化技术工业通信软件2.6版下载

NI-Industrial Communications for EtherCAT
NI-Industrial Communications for EtherCAT提供了EtherCAT主站支持，以支持NI控制器硬件上的确定性I/O。
NI-Industrial Communications for EtherCAT为用户使用CompactRIO控制器、PXI控制器或工业控制器提供支持。使用此软件，您可以通过使用基于EtherCAT总线的CompactRIO机箱或使用远程I/O硬件来扩展I/O。NI建议结合经过充分测试和验证的NI EtherCAT产品使用此驱动软件。

2.6
文件大小: 299046176 字节 (285.19 MB)
修改日期: 2013-08-16 05:05
MD5: e0dca06152f0baaa23324fef7423ef74
SHA1: 53199de088bf3b29ad7886778a89de1d0d352461
SHA256: c3113bfb46f7028da3f7bd5f3387a60081ce419b177b22f432385081b51f2d3c
CRC32: 365c434f

百度网盘和NI官方下载地址：

NI-Industrial Communications for EtherCAT 2.6 Win32/64Eng 以太网控制自动化技术工业通信软件2.6版下载

http://pcmv.cn/thread-25580-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-Industrial Communications for EtherCAT® 2.6 Readme

June 2013
This file contains last-minute information about the NI-Industrial Communications for EtherCAT software. Some information in this file may be too recent to be included in the official documentation set.
Revision History
Documentation
Supported Platforms
Installation Instructions
Accessing the Help
Finding Examples
Known Issues
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

Revision HistoryVersion 2.6

  • Added support for cRIO-9068.

  • Added support for new C Series modules, such as NI 9381 and NI 9482.

Version 2.5

  • Added support for more than eight modules on third-party modular slave devices.

  • Added support for 4-port slave devices when DC is not enabled.

Version 2.4

  • Added support for sending and receiving raw PDO data.

  • Added support for monitoring slave device states.

Version 2.3

  • Fixed a latency issue caused by using fiberoptic converters in an EtherCAT network.

  • Added support for third-party C Series modules in the NI 9144 FPGA mode.

  • Added support for using Remote Programmatic API with the LabVIEW Run-Time Engine.

  • Extended the maximum scan period to 1 second.

Version 2.2

  • Added support for cable redundancy.

  • Added support for Modular Device Profiles.

  • Added support for NI cRIO-908x Controller Series.

Version 2.1

  • Improved the performance of User-defined Variables.

Version 2.0

  • Added support for Programmatic Configuration.

  • Added support for synchronization among multiple NI EtherCAT masters.

  • Added support for PXIe-8133 and Real-Time Desktop target.

  • Added support for NI 9214 C Series module. For the list of supported C Series modules, refer to NI 9144 User Guide.

Version 1.2

  • Added support for cRIO-9023, NI 9792 and EVS-146x Series.

  • Added support for new C Series modules. For the list of supported C Series modules, refer to NI 9144 User Guide.

Version 1.1

  • Added LabVIEW FPGA Module support for the NI 9144.

  • Added support for Industrial Controller and cRIO-9024.

  • Added support for new C Series modules (including the NI 951x Motion modules). For the list of supported C Series modules, refer to NI 9144 User Guide.

Version 1.0.2

  • Fixed incorrect installer dependency.

Version 1.0.1

  • Added support for cRIO-9022.

Version 1.0

  • Initial support for NI-Industrial Communications for EtherCAT.

Documentation

The NI-Industrial Communications for EtherCAT Installation Guide included with the NI-Industrial Communications for EtherCAT CD includes instructions for installing National Instruments EtherCAT software.
This installation guide is in Adobe Acrobat Portable Document Format (PDF). Refer to the Adobe Systems Incorporated website at www.adobe.com to download Adobe Reader.
The NI-Industrial Communications for EtherCAT Help is the primary document for NI-Industrial Communications for EtherCAT. This help includes an introduction to EtherCAT and information about application development.

Supported PlatformsSupported Hardware

This version of the NI-Industrial Communications for EtherCAT software supports the following National Instruments hardware products on the LabVIEW Real-Time Module:

  • NI CompactRIO real-time controller

    • NI cRIO-9022

    • NI cRIO-9023

    • NI cRIO-9024

    • NI cRIO-9025

    • NI cRIO-9068

    • NI cRIO-9074

    • NI cRIO-9081

    • NI cRIO-9082

    • NI 9792

  • Embedded real-time controllers with the NI PXI-8231, PXI-8232, or PXI-8234 Ethernet interface

    • All real-time embedded PXI controllers

  • Embedded real-time controllers with two built-in Ethernet adapters

    • PXI-8109

    • PXI-8115

    • PXIe-8115

    • PXIe-8133

    • PXIe-8135

    • NI 3100 Industrial Controller

    • NI 3110 Industrial Controller

  • Real-Time Desktop target with any of the following Ethernet interfaces

    • NI PCIe-8231

    • NI PCI-8232

    • NI PCIe-8235

  • Embedded Vision System

    • EVS-1463

    • EVS-1463 RT

    • EVS-1464

    • EVS-1464 RT

  • Rack-Mount 1U Controllers

    • NI RMC-8354

    • NI RMC-8355

Software Requirements

In addition to the system requirements for the LabVIEW Development System, the NI-Industrial Communications for EtherCAT software has the following requirements:

  • LabVIEW 2010 or later

  • LabVIEW 2010 Real-Time Module or later

  • NI-RIO 13.0

Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW.

Notes:

  • To use NI 9144 in FPGA Mode, you must have the LabVIEW FPGA Module installed on the host computer, or access to a compiled bitfile you can download to the FPGA of NI 9144.

  • The LabVIEW NI SoftMotion Module must be installed for the NI 951x Series drive interface modules to work on EtherCAT.

Installation Instructions

Before installing the NI-Industrial Communications for EtherCAT software, log on as Administrator or as a user with Administrator privileges. The NI-Industrial Communications for EtherCAT software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-Industrial Communications for EtherCAT software.

  • Insert the NI-Industrial Communications for EtherCAT software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-Industrial Communications for EtherCAT software CD.

  • The installation wizard guides you through the necessary steps to install the NI-Industrial Communications for EtherCAT software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking the Cancel button.

  • When the installation is complete, click the Finish button.

NI-Industrial Communications for EtherCAT Updates and Notifications

National Instruments posts information about critical updates and security notifications on ni.com. Visit ni.com/info and enter Info Code updates to access this information.

Accessing the Help

Refer to the NI-Industrial Communications for EtherCAT Help, accessible by selecting Help»NI-Industrial Communications for EtherCAT from the pull-down menu in LabVIEW, for information about using the NI-IndCom for EtherCAT software.

Finding Examples

LabVIEW examples for the NI-IndCom for EtherCAT software are in the labviewexamplesindcomecat folder. You can modify an example VI to fit an application or copy an example and paste the example to a VI you create.

Known Issues

You can access the software and documentation known issues list online. Refer to the National Instruments website for an up-to-date list of known issues in the NI-Industrial Communications for EtherCAT.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:

  • For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.

  • For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.

  • To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8

When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
Note  MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8. You can launch MAX either from the Start screen or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
Current ApplicationIcon LocationPin to Action
Windows 8 DesktopDesktop TaskbarRight-click application and select Pin to Taskbar
Windows 8 DesktopStart screenRight-click application and select Pin to Start
Windows 8 Start screenDesktop TaskbarRight-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.

NI-Industrial Communications for EtherCAT Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

National Instruments NI-Industrial Communications for EtherCAT will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Industrial Communications for EtherCAT that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
ProductInfo Code
NI LabVIEWlifecycle
NI LabWindows™/CVI™cvi_lifecycle
NI Measurement Studiomstudiolifecycle
NI TestStandtslcp
NI DIAdemddlcp
NI SignalExpressselcp
NI VeriStandnivslifecycle

Important Information

Copyright
© 2008–2013 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

  • Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.

  • EULAs are located in the <National Instruments>SharedMDFLegallicense directory.

  • Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
Credits
This product includes components that use the Expat XML Parser. In regards to the Expat XML Parser, the following notice applies:
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.


首页
84162741QQ
联系