下载中心

NI CompactRIO Module Support 13.1.1 Patch Win32Eng/Jpn/Chs NI-CompactRIO模块支持13.1.1补丁

文章来源:石鑫华视觉网时间:2022-05-11 17:19:13 点击:159

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI CompactRIO Module Support 13.1.1 Patch Win32Eng/Jpn/Chs NI-CompactRIO模块支持13.1.1补丁

NI CompactRIO模块支持
NI CompactRIO Module Support支持CompactRIO控制器、CompactRIO机箱和CompactRIO单板控制器。
NI CompactRIO Module Support是一个驱动软件，用于支持CompactRIO系统的识别、编程和部署。除LabVIEW之外，您还必须安装NI CompactRIO Module Support以及LabVIEW Real-Time模块和/或LabVIEW FPGA模块，才能开始对硬件进行编程。

13.1.1安装补丁之前请先安装NI-RIO 13.1.0。
文件大小: 266554938 字节 (254.21 MB)
修改日期: 2014-03-21 00:36
MD5: db534a2aa49bfd215e4e63e5600c114b（官方正确）
SHA1: bc8f41081a702901015ce6cfa690f211a89f70b6
SHA256: 6ecbb611508c34437dc539e6755672c3ee935bce438c5c076788f33b81294919
CRC32: cf2cc2d9

http://pcmv.cn/thread-25274-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI CompactRIO Module Support 13.1.1 Readme

February 2014

ni.com/support

This file contains important information about NI CompactRIO Module Support 13.1.1, including information on installing NI CompactRIO Module Support 13.1.1, descriptions of known issues for installing and using NI CompactRIO Module Support 13.1.1, and information about the hardware and software supported by NI CompactRIO Module Support 13.1.1.

Installing NI CompactRIO Module Support 13.1.1
What Is New in NI CompactRIO Module Support 13.1.1
Supported Platforms
Supported Hardware and Software
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8.x
NI CompactRIO Module Support Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

Installing NI CompactRIO Module Support 13.1.1

Complete the following steps to install NI CompactRIO Module Support 13.1.1 for use with LabVIEW.

Install one of the following supported versions of LabVIEW:

LabVIEW 2013
LabVIEW 2012 SP1
LabVIEW 2011 SP1

Install LabVIEW Real-Time.
Install LabVIEW FPGA.
Install NI CompactRIO 13.1.
Install NI CompactRIO Module Support 13.1.1.

Other Installation Notes

This installation requires that version 3.1 of the MSI Engine is installed on your computer. If you do not have MSI 3.1 or later, the installer updates the engine automatically and may require you to restart your computer.
If you are installing NI driver software on Windows Vista, you must first uninstall all National Instruments software versions older than the February 2007 release before you proceed with this installation. For additional information and tools to assist you in upgrading NI driver software on Windows Vista, refer to the How Do I Remove Unsupported NI Software from Windows Vista to Install Officially Supported Versions? National Instruments KnowledgeBase article.
If you want to install from a network location, copy the entire contents of the installation disk to a single folder and run from that location.

Uninstalling NI CompactRIO Module Support

You can uninstall NI software and drivers by selecting National Instruments Software in the Windows Add/Remove Programs application.

What Is New in NI CompactRIO Module Support 13.1.1

Support for NI 9242 in LabVIEW 2013
Support for NI 9244 in LabVIEW 2013
Support for NI 9437 in LabVIEW 2013

Supported Platforms

NI CompactRIO Module Support 13.1.1 supports the following platforms:

Operating System	64-bit	32-bit	Comments
Windows 8.x	✔	✔	Refer to the How to Use NI Software with Microsoft Windows 8.x section of this document for more information about NI CompactRIO on Windows 8.x.
Windows 7 Professional	✔	✔	—
Windows Vista Business	✔	✔	Refer to the NI CompactRIO Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016 section of this document for more information about NI CompactRIO support for those versions.
Windows XP Professional SP2	—	✔
Windows Server 2012 R2	✔	—	—
Windows Server 2008 R2	✔	—	—
Windows Server 2003 R2	—	✔	Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.

Supported Hardware and Software

NI CompactRIO Module Support 13.1.1 provides support for C Series modules in all CompactRIO, Single-Board RIO, and R Series systems. Refer to the NI Developer Zone at ni.com for a complete list of the hardware that is supported by this and previous versions of NI CompactRIO as well as what versions of LabVIEW software are supported by each version of NI CompactRIO.

For additional CompactRIO product support and information, refer to ni.com/compactrio.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.

How to Use NI Software with Microsoft Windows 8.x

When you install National Instruments software on Microsoft Windows 8.x, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher.

Using NI Launcher

NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile in the Apps view. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.

Note NI MAX does not appear as a desktop shortcut when installed on Microsoft Windows 8.x. You can launch NI MAX either from the Apps view or from within NI Launcher.

Pinning Frequently Used Applications

For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:

Current Application	Icon Location	Pin to Action
Windows 8.x Desktop	Desktop Taskbar	Right-click application and select Pin to Taskbar
Windows 8.x Desktop	Start screen	Right-click application and select Pin to Start
Windows 8.x Start screen	Desktop Taskbar	Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen

Finding All Programs

If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files from the Apps view. To get to the Apps view, right-click anywhere on the Start screen and select All apps (Windows 8) or click the down arrow on the bottom left of the screen (Windows 8.1).

For more information about NI support for Windows 8.x, visit ni.com/windows8.

NI CompactRIO Module Support Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016

NI CompactRIO Module Support will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI CompactRIO Module Support that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:

Product	Info Code
NI LabVIEW	lifecycle
NI LabWindows™/CVI™	cvi_lifecycle
NI Measurement Studio	mstudiolifecycle
NI TestStand	tslcp
NI DIAdem	ddlcp
NI SignalExpress	selcp
NI VeriStand	nivslifecycle

Legal Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.

下载中心

NI CompactRIO Module Support 13.1.1 Patch Win32Eng/Jpn/Chs NI-CompactRIO模块支持13.1.1补丁