下载中心

NI-XNET 17.5.1 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序17.5.1下载

文章来源:石鑫华视觉网时间:2022-05-10 14:22:09 点击:447

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-XNET 17.5.1 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序17.5.1下载

NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。

17.5.1
文件大小: 720432981 字节 (687.06 MB)
修改日期: 2019-06-25 02:43
MD5: 5b849a1e11fe8c81fb16ddac17d6ee7a（官方正确）
SHA1: bb60297afda3a4c3a13c15c99594bcbb46ccc637
SHA256: 6317df6a71f5d24769a04b58a4306d9926cd34f95ba91e2e6c1798ba8b3e9e51
CRC32: 79c31f27

http://pcmv.cn/thread-25173-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)

NI-XNET 17.5.1 Readme

January 2018

This file contains important information about NI-XNET, including installation instructions, new features, a partial list of bugs fixed for NI-XNET 17.5.1, and known issues.

Supported Operating Systems

Application Software Support

Installation Instructions

Product Security and Critical Updates

New Features and Changes

Supported Hardware

Known Issues

Bug Fixes

Additional Programming Topics

Accessing the Help

Automating the Installation of NI Products

Using NI Software with Microsoft Windows 10

Using NI Software with Microsoft Windows 8.1

Legal Information

Supported Operating Systems

NI-XNET supports the following operating systems:

Windows 10
Windows 8.11
Windows 7 SP12
Windows Server 2012 R21
Windows Server 2008 R2 SP12

Note Support for Windows 32-bit operating systems may require disabling physical address extension (PAE). To learn how this might affect your system and what actions you might need to take, visit ni.com/info and enter the Info Code PAESupport.

1 NI software installs VC2015 Runtime and .NET 4.6.2. Windows 8.1 and Windows Server 2012 R2 require Microsoft updates to support these items. Refer to Microsoft KB2919442 and KB2919355 for more information about how to install these updates.

2 NI software is signed with a SHA-256 certificate. Windows 7 SP1, Windows Embedded Standard 7 SP1, and Windows Server 2008 R2 SP1 require Microsoft updates to support SHA-256. Refer to Microsoft KB3033929 for more information about how to install this security update.

The NI-XNET installer does not support Windows Server 2003/NT/Vista/XP/Me/2000/98/95 or the Windows Server non-R2 editions.

NI-XNET does not support guest accounts on Windows 7. You must log into an administrative or user account to use NI-XNET on these operating systems.

Application Software Support

This version of the NI-XNET software supports the following development environments:

LabVIEW 2014, 2015, 2016, and 2017
LabVIEW Real-Time (RT) 2014, 2015, 2016, and 2017
LabWindows/CVI 2013 and higher
Microsoft Visual C/C++ 6.0

Installation Instructions

Before installing the NI-XNET software, log on as Administrator or as a user with Administrator privileges. The NI-XNET software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-XNET software.

Insert the NI-XNET software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-XNET software CD.
The installation wizard guides you through the necessary steps to install the NI-XNET software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.
When the installation is complete, click Finish.

Product Security and Critical Updates

Visit ni.com/security to view and subscribe to receive security notifications about NI products. Visit ni.com/critical-updates for information about critical updates from NI.

New NI-XNET 17.5.1 Features and Changes as Compared to NI-XNET 17.5

The NI-XNET 17.5.1 release changes the following:

Bug Fix for cDAQ-9171 support.

New NI-XNET 17.5 Features and Changes as Compared to NI-XNET 17.0.1

The NI-XNET 17.5 release adds the following features:

Read LIN clusters from AUTOSAR 3.x and 4.x files.
Notes NI-XNET supports PDUs only if there is a 1:1 mapping between the PDU and frame layout. The import is limited to features supported by the NI-XNET driver.

Extract LIN frames and signals. The signal names are the names of the SYSTEM-SIGNAL instances.
Attach LIN frames to the ECUs as "Rx/Tx."
Extract LIN cluster specific information (i.e. schedules and configuration frames).

Added user accessible checksum values to NI-XNET LIN frames.
Added support for ISC-178X smart cameras.
Added support for signals larger than 52 bits in the API and the Database Editor.

Signals up to 64 bits can be read/written as double floating point (rounded).
Signals of any size can be read/written as byte strings using a conversion session.

The NI-XNET 17.5 release changes the following:

Removed support for CVI 2012.

New NI-XNET 17.0.1 Features and Changes as Compared to NI-XNET 17.0

The NI-XNET 17.0.1 release changes the following:

Bug Fix for LabVIEW 64-bit support.

New NI-XNET 17.0 Features and Changes as Compared to NI-XNET 16.1

The NI-XNET 17.0 release adds the following features:

Support for LabVIEW 2017.
Support for NI PCIe-8510.
Read CAN clusters from AUTOSAR 3.x and 4.x files.
Notes NI-XNET supports PDUs only if there is a 1:1 mapping between the PDU and frame layout. The import is limited to features supported by the NI-XNET driver.

Extract CAN frames and signals. The signal names are the names of the SYSTEM-SIGNAL instances.
Attach CAN frames to the ECUs as "Rx/Tx."
Extract CAN FD specific settings.

The NI-XNET 17.0 release changes the following:

Improvements that require a firmware update for NI 9860 modules and the cDAQ integrated XNET port.
Removed support for LabVIEW 2013.
Removed support for CVI 2010.

New NI-XNET 16.1 Features and Changes as Compared to NI-XNET 16.0

The NI-XNET 16.1 release adds the following features:

Added support for the NI USB-850x USB modules.
Added C-API examples for J1939.
Enabled setting a custom baudrate for ISO CAN FD in the Bus Monitor and Database Editor.
Enabled excluding IDs in the Bus Monitor.
Enabled setting a node address for J1939 in the Bus Monitor.

The NI-XNET 16.1 release changes the following:

Removed support for CVI 8.5, 9.0, and 2009.

Supported Hardware

NI USB-8502 (High-Speed/FD CAN)
NI USB-8506 (LIN)
NI PCI-8511 (Low-Speed/Fault-Tolerant CAN)
NI PCI-8512 (High-Speed/FD CAN)
NI PCI-8513 (Software-Selectable/FD CAN)
NI PCI-8516 (LIN)
NI PCI-8517 (FlexRay)
NI PCIe-8510 (Hardware-Selectable)
NI PXI-8511 (Low-Speed/Fault-Tolerant CAN)
NI PXI-8512 (High-Speed/FD CAN)
NI PXI-8513 (Software-Selectable/FD CAN)
NI PXI-8516 (LIN)
NI PXI-8517 (FlexRay)
NI PXIe-8510 (Hardware-Selectable)
NI TRC-8542 NI-XNET CAN HS/FD Transceiver Cable
NI TRC-8543 NI-XNET CAN XS (LS/FT, HS/FD)Transceiver Cable
NI TRC-8546 NI-XNET LIN Transceiver Cable
C Series modules:

CompactDAQ—NI-DAQmx 14.1 (or newer) is required for:
CompactDAQ—NI-DAQmx 14.5 (or newer) is required for:
CompactDAQ—NI-DAQmx 15.1 (or newer) is required for:
CompactDAQ—NI-DAQmx 17.1 (or newer) is required for:
CompactRIO—NI Compact RIO 17.6 (or newer) and LabVIEW 2014 (or newer) are required for the following targets:
CompactRIO—NI Compact RIO 17.6 (or newer) and LabVIEW 2015 (or newer) are required for the following targets:
CompactRIO—NI Compact RIO 17.6 (or newer) and LabVIEW 2016 (or newer) are required for the following targets:
CompactRIO—NI Compact RIO 17.6 (or newer) and LabVIEW 2017 (or newer) are required for the following targets:
USB Chassis: NI cDAQ-9171, NI cDAQ-9174, and NI cDAQ-9178
Ethernet Chassis: NI cDAQ-9181, NI cDAQ-9184, and NI cDAQ-9188
Wireless Chassis: NI cDAQ-9191
cDAQ Controller: NI cDAQ-9138 (Windows and RT) and NI cDAQ-9139 (Windows and RT)
cDAQ Controller: NI cDAQ-9132 (Windows and RT) and NI cDAQ-9134 (Windows and RT)
cDAQ Controller: NI cDAQ-9135 (Windows and RT)
USB Chassis: NI cDAQ-9179
cDAQ Controller: NI cDAQ-9136 (Windows and RT) and NI cDAQ-9137 (Windows and RT)
Ethernet Chassis: NI cDAQ-9185 and NI cDAQ-9189
Real-Time Controller: NI cRIO-9012, NI cRIO-9014, NI cRIO-9022, NI cRIO-9023, NI cRIO-9024, and NI cRIO-9025
CompactRIO Reconfigurable Chassis: NI cRIO-9111, NI cRIO-9112, NI cRIO-9113, NI cRIO-9114, NI cRIO-9116, and NI cRIO-9118
Integrated CompactRIO Real-Time Controller: NI cRIO-9081, NI cRIO-9082, NI cRIO-906x, and NI cRIO-903x
LabVIEW FPGA 2014 is required to build and deploy a bitstream with NI 986x modules in the project.
When using NI Compact RIO 17.0 (or newer) with NI cRIO-903x or NI cRIO-906x, a bitstream is not needed with NI 986x modules in the project.
Single-Board RIO: NI sbRIO-9627, NI sbRIO-9607
CompactRIO Real-Time Controller: NI cRIO-9032, NI cRIO-9037
LabVIEW FPGA 2015 (or newer) is required to build and deploy a bitstream with NI 986x modules in the project.
When using NI Compact RIO 17.0 (or newer) with NI cRIO-903x or NI cRIO-906x, a bitstream is not needed with NI 986x modules in the project.
CompactRIO Real-Time Controller: cRIO-9035 (Sync), cRIO-9039 (Sync)
CompactRIO Real-Time Controller: cRIO-904x
The cRIO-904x requires NI CompactRIO 17.6 (or newer) and NI-DAQmx 17.6 (or newer). NI CompactRIO 17.6 (or newer) normally includes the necessary support for DAQmx 17.6
NI 9861 (C Series Low-Speed CAN)
NI 9862 (C Series High-Speed/FD CAN)
NI 9866 (C Series LIN)
NI 9860 (C Series Hardware-Selectable)

Supported platforms for XNET C Series modules:

The NI-XNET software supports only National Instruments CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.

Known Issues

Issue Number	Issue
—	FlexRay PXI-8517 boards may have memory issues on PXI controllers with less than 2 GB RAM.
—	When using an .ncd or .dbc database, the baud rate defaults to 500 k (250 k for J1939 databases), and the IO mode defaults to CAN 2.0. You need to programmatically override these values in your session if you need different values.
—	Changing transceiver cables on NI 9860, PXIe-8510 and PCIe-8510 on RT targets requires a refresh of MAX.
—	Changed behavior of Frame Default Payload property: If Application Protocol of a Cluster is J1939, the default for Default Payload bytes is now 0xFF instead of 0x00. As a consequence, unused bits in the frame will be set to 1 instead of 0 when J1939 is used (like required by J1939).
—	Variant Handling, as described within the AUTOSAR 4.x Generic Structure Template, is unsupported by NI-XNET. All AUTOSAR XML elements using the <VARIATION-POINT> tag will be discarded.
—	If reading AUTOSAR files, some types of frames are not assigned to ECUs as "Tx" (transmitted frames) or "Rx" (received frames).
667510	Changed Alias properties such as Baud Rate and IOMode are ignored the first time a database is opened. Workaround: Close and re-open the session.
672838	Inserting a USB-8502 device can result in an unusable device with internal errors on PharLap. Workaround: Remove and reinsert the device or reboot the system.
673342	NI-XNET Interface and Device property nodes can return erroneous session handles. Workaround: Typecast the Interface or Device Session to an NI-XNET Session and pass it to XNET Clear.

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed between NI-XNET 16.1 and NI-XNET 17.5. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-XNET.

Bug ID	Fixed Issue
679472	cDAQ-9171 does not work with NI-XNET 17.5.
668124	Using invalid NI-XNET sessions can crash the RT application.
646672	CAN frames with invalid DLC pass through the controller then the firmware sends the Kernel driver a larger than expected array.
639597	The option "Browse for Database File" on an NI-XNET IO control crashes LabVIEW 2017 (64-Bit).
631818	NI-XNET Echoed frames always have the CAN Data type regardless of the type actually transmitted.
612384	NI-XNET Compatibility Library for NI-CAN does not support hardware with transceiver cables.
612146	DBC Import: Unable to read the frame name if there are space characters behind the last character of the frame name and the ':' character following the name.
611887	NI-XNET controls fail to trigger the value changed event.
610257	Error for too many Frame Stream sessions says too many frames instead of too many sessions in NI-XNET error code 0xBFF63012.
609492	NI-XNET LIN C Series devices are unrecoverable after bus power is removed and error -1074384887 is detected.
576222	Manage NI-XNET Databases does not work on RT targets with a non-blank password.

Additional Programming TopicsNI-CAN Compatibility

If you intend to use the NI-CAN API with your NI-XNET PCI/PXI hardware, refer to the NI-XNET Compatibility for NI-CAN appendix in the NI-CAN Hardware and Software Manual.

Deployed databases on LabVIEW Real-Time targets

When upgrading the NI-XNET software on your LabVIEW Real-Time target, you need to re-deploy your database files to that target using a host computer that runs the same version of NI-XNET as the target.

Removing and inserting C Series modules on CompactRIO targets during device communication is not supported

Inserting a module into or removing a module from a cRIO chassis that is actively communicating with an NI 986x module can cause application failures and possibly device damage.

Accessing the Help

Refer to the NI-XNET Hardware and Software Help, accessible from National Instruments»NI-XNET»NI-XNET Documentation, for information about NI-XNET.

Automating the Installation of NI Products

You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes.

If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.

For more information about automating the installation of NI products, refer to the following KnowledgeBase articles:

For more information about silent installations of individual NI products, refer to KB 4CJDP38M, Customize and Automate Installation of a Single Installer.
For more information about silent installations of NI products in a suite, such as NI Developer Suite, refer to KB 4GGGDQH0, Customize and Automate Installation of a Suited Intaller.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, Determine Type and Version of My National Instruments Installer.

Using NI Software with Microsoft Windows 10

Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.

Using NI Software with Microsoft Windows 8.1

When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.

Legal Information

Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.

NI respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

End-User License Agreements and Third-Party Legal Notices

You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:

Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.

U.S. Government Restricted Rights

If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 and 252.227-7015 for military agencies.

IVI Foundation Copyright Notice

Content from the IVI specifications reproduced with permission from the IVI Foundation.

The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

Trademarks

Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the NI products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the NI Patent Notice at ni.com/patents.

374802K-01

下载中心

NI-XNET 17.5.1 Driver Download Win32/64 Eng/Ger/Jpn NI-XNET仪器驱动程序17.5.1下载