石鑫华视觉 手机微信QQ:13450001061

下载中心

NI-XNET 1.1 Driver Download Win32Eng/Ger/Jpn NI-XNET仪器驱动程序1.1下载

文章来源:石鑫华视觉网时间:2022-05-10 14:04:40 点击:289

Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html

视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html

NI-XNET 1.1 Driver Download Win32Eng/Ger/Jpn NI-XNET仪器驱动程序1.1下载

NI-XNET
NI-XNET为配置、开发和调试应用程序提供支持，适用于汽车以太网、CAN、LIN和FlexRay网络的原型验证、仿真和测试。
NI-XNET是一个NI仪器驱动程序，具有一组易用的常见功能，用于读写PXI、PCI、NI CompactDAQ和NI CompactRIO等不同平台的汽车以太网、CANI、LIN和FlexRay帧和信号。NI-XNET CAN、LIN和FlexRay接口经优化，适合需要对数百个CAN帧和信号进行高速实时操作的应用，如硬件在环仿真、快速控制原型、总线监控和自动化控制等。

1.1
文件大小: 327903470 字节 (312.71 MB)
修改日期: 2019-06-25 02:42
MD5: 9461be06f6d374cc1769955cd6bf0834
SHA1: 2b3fe636a86cf576995372ffca0c2dd3fde9e8b9
SHA256: 823c988305523a18b0117f192a6d215bc06c58a6f6f9892b1eba81249aad28d9
CRC32: a5ff6a7a

NI-XNET 1.1 Driver Download Win32Eng/Ger/Jpn NI-XNET仪器驱动程序1.1下载

http://pcmv.cn/thread-25152-1-1.html?fromuid=9

(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)



NI-XNET 1.1 Readme

March 2010
ni.com/xnet
This file contains information about the NI-XNET software for Windows 7/Vista/XP and LabVIEW™ Real-Time (RT). Information in this file is organized in the following sections:

  • Documentation

  • Supported Platforms

  • Installing NI-XNET 1.1

  • New Features and Changes

  • Bug Fixes

  • Additional Programming Topics

Documentation

The XNET Software and Hardware Installation Guide included with the NI-XNET CD includes instructions for installing National Instruments hardware and software.
The NI-XNET Hardware and Software Manual is the primary document for NI XNET products. This manual includes an introduction to CAN, FlexRay, and LIN, specifications for hardware, information about how to get started with application development, and a complete reference for all NI-XNET functions.
The NI-XNET Hardware and Software Manual is in Adobe Acrobat Portable Document Format (PDF). You can download the Acrobat Reader for free at: www.adobe.com.
Open the help from Start»All Programs»National Instruments»NI-XNET.
Links to the NI-XNET Hardware and Software Manual are in the online help for each NI-XNET function within the National Instruments LabVIEW and LabWindows™/CVI™ development environments.
Online help for the NI-XNET features within Measurement & Automation Explorer (MAX) is in the MAX Help Topics menu. The MAX Help Topics menu for NI-XNET also includes a link to the NI-XNET Hardware and Software Help.
Back to Top

Installing NI-XNET 1.1

Before installing the NI-XNET software, log on as Administrator or as a user with Administrator privileges. The NI-XNET software setup program must have Administrator privileges because the program modifies the configuration registry of your system. Complete the following steps to install the NI-XNET software.

  • Insert the NI-XNET software CD into your CD-ROM drive. The installer launches if your CD-ROM drive plays data CDs automatically. If the installer does not launch automatically, navigate to the CD using Windows Explorer and launch the autorun.exe file from your NI-XNET software CD.

  • The installation wizard guides you through the necessary steps to install the NI-XNET software. You can go back and change values where appropriate by clicking the Back button. You can exit the setup where appropriate by clicking Cancel.

  • When the installation is complete, click Finish.

Installing NI-XNET Silently

You can programmatically control which features in the NI-XNET distribution to enable or disable for installation. You therefore can install a subset of the NI-XNET distribution silently. Refer to the template_spec.txt file in the Specfiles directory on the NI-XNET CD for more information about installing NI-XNET silently and selecting which features to install automatically.
Back to Top

Supported PlatformsSupported Operating Systems

You can install and run this version of the NI-XNET software on the following operating systems:

  • Windows XP (32-bit)

  • Windows Vista (32-bit and 64-bit)

  • Windows 7 (32-bit and 64-bit)

  • Windows Server 2003 R2 (32-bit)

  • Windows Server 2008 R2 (64-bit)

The NI-XNET installer does not support Windows NT/Me/2000/98/95 or the Windows Server non-R2 editions.
Note:  National Instruments is committed to maintaining compatibility with Microsoft Windows technology changes. While most NI products work with Windows 7, NI has become aware of some compatibility issues regarding Windows 7. To learn how Windows 7 affects your use of NI products, visit ni.com/info and enter the info code windows7.
Note:  Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this may affect your use of Windows Server 2003 and what actions you may need to take, visit ni.com/info and enter the info code PAESupport.

Supported Hardware

This version of the NI-XNET software supports the following National Instruments hardware products on Windows and LabVIEW RT:

  • NI PCI-8511 (Low-Speed/Fault-Tolerant CAN)

  • NI PCI-8512 (High-Speed CAN)

  • NI PCI-8513 (Software-Selectable HS/LS/SW CAN)

  • NI PCI-8516 (LIN)

  • NI PCI-8517 (FlexRay)

  • NI PXI-8511 (Low-Speed/Fault-Tolerant CAN)

  • NI PXI-8512 (High-Speed CAN)

  • NI PXI-8513 (Software-Selectable HS/LS/SW CAN)

  • NI PXI-8516 (LIN)

  • NI PXI-8517 (FlexRay)

The NI-XNET software supports only National Instruments CAN, FlexRay, and LIN hardware products. For information about software for CAN products from other vendors, refer to the documentation you received with those products.

Supported Development Environments

This version of the NI-XNET software supports the following development environments:

  • LabVIEW 8.5, 8.6, and LabVIEW 2009 (32-bit)

  • LabVIEW Real-Time (RT) 8.5, 8.6, and 2009

  • LabWindows/CVI 8.5 and higher

  • Microsoft Visual C/C++ 6.0

Back to Top

New Features and Changes as Compared to NI-XNET 1.0.

The NI-XNET 1.1 release adds the following features:

  • New feature: Support for PCI-8516 and PXI-8516 (LIN bus interface).

  • New feature: Replay mode (CAN only. Refer to the Interface:Output Stream Timing, Interface:Output Stream List, and Interface:CAN:Output Stream List By ID properties.)

  • New feature: Cyclic frame spacing (CAN only. Refer to the Frame:CAN:Start Time Offset property.)

  • New feature: Frame level fault insertion (CAN only: Change the period during runtime. Refer to the Frame:CAN:Transmit Time property. CAN only: Skip N transmissions of a cyclic frame. Refer to the Frame:Skip N Cyclic Frames property.)

  • New feature: Frame reordering (CAN only. Refer to the Interface:CAN:Pending Transmit Order property.)

  • New feature: LabVIEW Real-Time support on desktop PC real-time systems.

The NI-XNET 1.1 release changes the following behavior:

  • In the NI-XNET 1.0, you could connect one NI-XNET class to a different NI-XNET class (for example, you could wire an NI-XNET frame to a property node of an NI-XNET signal). This class mismatch in NI-XNET 1.0 usually was detected at runtime only. In LabVIEW 2009, NI-XNET 1.1 shows this as a broken wire at edit time.

Back to Top

Bug Fixes

The following items are the IDs and titles of a subset of issues fixed between NI-XNET 1.0 and NI-XNET 1.1. If you have a CAR ID, you can search this list to validate that the issue has been fixed. This is not an exhaustive list of issues fixed in the current version of NI-XNET.
Bug IDFixed Issue
195809NI-XNET Compatibility Library for NI-CAN: ncConfig/ncOpenObject/ncCloseObject functions leak memory and handles.
194073NI-XNET Compatibility Library for NI-CAN: Notifications cannot be rearmed without disabling them first.
192007Read timestamp function may return a timestamp that is off by about 7 minutes.
181246NI-XNET Compatibility Library for NI-CAN: The nctInitialize function and the CAN Init VI do not use the baud rate of a currently running interface.
180542NI-XNET Compatibility Library for NI-CAN: ncConfig called with same parameters on open of CAN objects returns an error.
193647NI-XNET Compatibility Library for NI-CAN: Added code to avoid hanging ncCreateNotification() when attempting to disarm a pending notification.
206461NI-XNET Compatibility Library for NI-CAN: Added code to avoid hanging ncCreateNotification() when attempting to close an object with a pending notification.
186551Losing arbitration while in Single Shot Transmit mode may cause a session to stop sending frames.
Back to Top

Additional Programming TopicsNI-CAN Compatibility

If you intend to use the NI-CAN API with your NI-XNET hardware, refer to the NI-XNET Compatibility for NI-CAN appendix in the NI-CAN Hardware and Software Manual.
Back to Top

Copyright

Copyright 2009–2010 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.

Trademarks

CVI, National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Patents

For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.


首页
84162741QQ
联系