石鑫华视觉
Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-DCPower Driver 1.8 Download Win32/64ENG NI DC电源仪器驱动程序下载1.8
NI-DCPower
NI-DCPower为使用NI DC电源和源测量单元(SMU)的客户提供支持。
NI-DCPower是与所有NI可编程电源和SMU进行通信必需的NI仪器驱动程序。NI-DCPower是一种可兼容可互换虚拟仪器(IVI)的仪器驱动程序，提供一系列操作和属性，可以执行波形或信号发生器的功能，并包含交互式软件前面板和示例。
NI-DCPower Driver 1.8 Download Win32/64ENG NI DC电源仪器驱动程序下载1.8
http://pcmv.cn/thread-25118-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
New Features
Supported Hardware
System Requirements
Installed File Names and Locations
Software
Documentation
Examples
Updates and Notifications
Uninstalling/Modifying NI-DCPower
Known Issues
Bug Fixes
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8
Important Information
Support for the NI PXIe-4112/4113
Support for self-calibration of the NI PXI-4132
Support for the NI PXIe-4144/4145
Support added for LabVIEW 2012 (32-bit) and LabVIEW 2012 (64-bit)
Support removed for LabVIEW 8.6.1
Support for the NI PXIe-4142/4143
Support for NI-DCPower run-time custom installers built using National Instruments application development environments (ADEs). This installer contains instrument driver run-time components required to deploy applications using NI DC Power Supplies and SMUs.
The run-time installer does not contain support for interactively configuring or testing hardware using Measurement & Automation Explorer (MAX).
The run-time installer does not support upgrading from NI-DCPower 1.6.x or earlier or NI-DAQmx 8.9.x or earlier. You must uninstall these products prior to installing the NI-DCPower Run-Time installer.
Support for LabVIEW 2011 (32-bit) and LabVIEW 2011 (64-bit)
Support removed for LabVIEW 8.5.1
Support for NI PXIe-4140/4141
Support for new signal routes added to the NI PXI-4132 (Source Complete event to Measure trigger) and the NI PXIe-4140/4141/4154 (Measure trigger to Source trigger, Source trigger to Measure trigger, and Source Complete event to Measure trigger)
NI PXI-4110
NI PXIe-4112
NI PXIe-4113
NI PXI-4130
NI PXI-4132
NI PXIe-4140
NI PXIe-4141
NI PXIe-4142
NI PXIe-4143
NI PXIe-4144
NI PXIe-4145
NI PXIe-4154
Windows 8 (32-bit and 64-bit)
Windows 7 (32-bit and 64-bit)
Windows Vista (32-bit and 64-bit)
Windows XP Service Pack 3 (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
LabVIEW Real-Time Module
LabWindows/CVI Real-Time Module
Processor—Pentium III/Celeron 600 MHz or equivalent
RAM—
Windows XP Service Pack 3 (SP3): 128 MB
Windows 8/7/Vista: 512 MB
Microsoft Internet Explorer 5.5 or later
A screen resolution of 800 x 600 with 256 colors
Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
Processor—Pentium 4 or equivalent
RAM—
Windows XP SP3: 256 MB
Windows 8/7/Vista: 1 GB
A screen resolution of 1,024 x 768
Windows 8/7/Vista/XP SP3, with all available critical updates and service packs
LabVIEW 2009 SP1 (32-bit), 2009 SP1 (64-bit), 2010 SP1 (32-bit), 2010 SP1 (64-bit), 2011 SP1 (32-bit), 2011 SP1 (64-bit), 2012 (32-bit), or 2012 (64-bit)
LabVIEW Real-Time Module 2009 SP1, 2010 SP1, 2011 SP1, or 2012
LabWindows™/CVI™ 9.0.1 or later
LabWindows/CVI Real-Time Module 2009 or later
Microsoft Visual C++ (MSVC) 6.0 or later
If you are running your application on an RT target, 128 MB of memory or more is required.
<NIDocDir> is an alias for the following National Instruments file folder location:
Windows XP: Documents and SettingsAll UsersShared DocumentsNational Instruments
Windows 8/7/Vista: UsersPublicDocumentsNational Instruments
<IVIROOTDIR32> is an alias for the following National Instruments file folder location:
Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI
Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP: Program FilesIVI FoundationIVI
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program Files (x86)IVI FoundationIVI
| Note | $(IVIROOTDIR32) is configured as an environment variable on the target system. |
| If you upgraded an installation of IVI, your files may be located in the following location: |
<IVIROOTDIR64> is an alias for the following National Instruments file folder location:
Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit): Program FilesIVI FoundationIVI
| Item | Installed Location on Windows 8 (32-bit)/7 (32-bit)/Vista (32-bit)/XP |
| NI-DCPower | <IVIROOTDIR32>Drivers iDCPower |
| NI-DCPower Function Panel | <IVIROOTDIR32>Drivers iDCPower iDCPower.fp |
| NI-DCPower Examples | <NIDocDir> iDCPowerExamples |
| NI-DCPower Header files | <IVIROOTDIR32>Include |
| NI-DCPower Import Library files (32-bit) | <IVIROOTDIR32>Lib |
| NI-DCPower Import Library files (64-bit) | <IVIROOTDIR32>Lib_x64 |
| NI-DCPower DLL (32-bit) | <IVIROOTDIR32>Bin |
| Item | Installed Location on Windows 8 (64-bit)/7 (64-bit)/Vista (64-bit) |
| NI-DCPower Function Panel | <IVIROOTDIR64>Drivers iDCPower iDCPower.fp |
| NI-DCPower Header files | <IVIROOTDIR64>Include |
| NI-DCPower Import Library files (64-bit) | <IVIROOTDIR64>Lib_x64 |
| NI-DCPower DLL (64-bit) | <IVIROOTDIR64>Bin |
NI-DCPower Readme
NI DC Power Supplies and SMUs Getting Started Guide—Printed and PDF format. Contains hardware and software installation, MAX configuration, and signal connection information.
NI DC Power Supplies and SMUs Help—HTML help format. Contains power supply fundamentals, hardware device overview, programming information, LabVIEW reference, and C/CVI/VB reference sections.
NI DC Power Supplies and SMUs Specifications—Printed and PDF format. Lists specifications for NI DC Power Supplies and SMUs.
NI DC Power Supplies and SMUs Calibration Procedures—PDF format. Contains calibration instructions for NI DC Power Supplies and SMUs.
Maintain Forced-Air Cooling Note to Users—Printed format. Contains important cooling information for NI DC power supplies and SMUs.
Read Me First: Safety and Electromagnetic Compatibility—Printed format. Contains safety instructions and electromagnetic compatibility (EMC) information for the hardware it accompanies.
Launch the Control Panel by selecting Start»Settings.
Double-click Add/Remove Programs.
Select National Instruments Software.
Click Change/Remove.
Select NI-DCPower 1.8 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Launch the Control Panel by selecting Start»Control Panel.
Double-click Programs and Features.
Select National Instruments Software.
Click the Uninstall/Change button.
Select NI-DCPower 1.8 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
Right-click on the Start screen.
Select All apps, and launch the Control Panel.
Select Programs»Programs and Features.
Select National Instruments Software.
Click the Uninstall button.
Select NI-DCPower 1.8 from the dialog box that appears.
Click Remove to uninstall the product; click Modify to change the components that are installed.
NI-DCPower Run-Time 1.8
NI IVI Compliance Package 4.4
NI Measurement & Automation Explorer 5.3.3
NI-DAQmx 9.1.7
NI-VISA Runtime 5.0
NI Spy 2.7.2
| ID | Fixed Issue |
| 286821 | Fixed an issue in which you must run LabWindows/CVI with elevated privileges to successfully launch the NI-DCPower Simultaneous Update example from LabWindows/CVI. NI has renamed this example to NI-DCPower Simultaneous Operation, and you no longer need to run LabWindows/CVI with elevated privileges to launch this example. |
| 371368 | Fixed an issue in which temperature changes degraded the output accuracy on the NI PXI-4132. You can now self-calibrate the NI PXI-4132 to maintain output accuracy. |
| ID | Fixed Issue |
| 369565 | In a few rare cases, when users wrote to nonvolatile storage on the NI PXIe-4140/4141/4142/4143, calibration constants became invalid, causing the device to become unusable until its next external calibration. Now you can write to nonvolatile storage on the NI PXIe-4140/4141/4142/4143 without issue. |
| ID | Fixed Issue |
| 352628 | The first measurement taken after opening a new session for the NI PXI-4132 no longer has the potential to be incorrect. |
| 347012 | Configuring the niDCPower Output Connected property to TRUE or the NIDCPOWER_ATTR_OUTPUT_CONNECTED attribute to VI_TRUE while in the Running state no longer incorrectly configures the NI PXI-4132 for remote sense. |
| 346464 | In SignalExpress, using the NI-DCPower Generate step while sweeping no longer sources only the first point in the sequence. |
| 346154 | LabVIEW code generated in SignalExpress from the NI-DCPower Generate step no longer returns an error when run while sweeping. |
| 342622, 341027 | The performance of the NI PXIe-4140/4141 range change algorithm is improved. |
| 328629 | When configuring the device in the Committed state in Single Point source mode after a property or attribute is configured in the Running state, the incorrect previous property or attribute value is no longer retained. |
| 283258 | Previously, the Measure Record Length property or NIDCPOWER_ATTR_MEASURE_RECORD_LENGTH attribute permitted a measurement record to be composed of up to 231-1 measurements, but the driver and hardware would silently ignore a measurement record composed of more than 224 measurements. The driver now returns an error if you attempt to compose a measurement record of more than 224 measurements. This change in behavior may change how existing code is executed. |
| 318481 | The NI PXI-4132 output disabled current limit is now 2% of the current limit range, as intended. |
| ID | Fixed Issue |
| 323968 | Aborting an operation no longer has the potential to cause transient output behavior on subsequent configurations of the NI PXI-4132 or NI PXIe-4140/4141. |
| ID | Fixed Issue |
| 283254 | Warning 1073364993 is now returned instead of error -1074118605 if a measurement is taken while the device is performing a range change. |
| ID | Fixed Issue |
| 217333 | The source delay attribute will be coerced to a minimum of 30μs on the NI PXI-4132. |
| 178242 | When handshaking on the NI PXI-4132 with other devices using the source trigger and measure complete event, the source trigger will no longer be missed. |
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.