Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2016 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2016
LabVIEW声音和振动工具包提供了音频测试、声学测量和振动测量应用所需的函数和显示控件。
LabVIEW声音和振动工具包是一个软件附加组件，包含易于使用的功率谱、正弦扫频和倍频程分析VI。它还可进行音频和失真测量、频率分析、频率响应测量和瞬态分析。该工具包还对分析解决方案进行了更新，以符合不断发展的IEC标准。LabVIEW声音和振动工具包提供了50多个可立即运行的LabVIEW示例，旨在帮助用户快速开始开发应用程序。
SV工具包，在2019及之后版本，使用32位、64位分开安装文件的方式，在2018及之前的版本则使用同一个安装文件，即同一安装文件可支持32位、64位LabVIEW，与VISION模块类似。具体的请查看下面的自述文件。
SV2016版的安装包比SV2015版的安装小了近1GB，从自述文件中看到，主要是少了SV快速VI和SVA的助手工具，如果要安装SV快速VI和SVA助手，则需要使用2015及以前的版本：
Note: Sound and Vibration Express VIs and the Sound and Vibration Assistant are not installed by NI Sound and Vibration Measurement Suite 2016. Side-by-side installation is supported; therefore you may install the Sound and Vibration Assistant from NI Sound and Vibration Toolkit or NI Sound and Vibration Measurement Suite 2015 or earlier.
百度网盘下载地址（限速，请开会员或使用破解限速工具）：
EXE版与ZIP版内容一样，EXE版为NI当年发行版，ZIP版为NI后期重新压制的版本。
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
ZIP版：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看，充值请联系在线客服 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
EXE版：
请注册登陆视觉论坛会员，购买附件查看
ZIP版：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2016 Sound and Vibration Analysis LabVIEW声音和振动工具包NISV2016
http://pcmv.cn/thread-24379-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2016 Sound and Vibration Analysis VIs Readme
Version 16.0.0
June 2016
This file contains information about LabVIEW support for the NI Sound and Vibration Toolkit 2016 and the NI Sound and Vibration Measurement Suite 2016. This file also provides you with help resources you can use while working with the software. Refer to the National Instruments Web site for a comparison between the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.
This file contains the following information:
Overview
System Requirements
NI Application Software Support
Installation Instructions
Product Security and Critical Updates
New Features
Known Issues
Bug Fixes
Redistributing Executable Sound and Vibration Applications
Accessing the Help
Accessing Sample Projects
Finding Examples
Automating the Installation of NI Products
Using NI Software with Microsoft Windows 10
Using NI Software with Microsoft Windows 8.1
NI Sound and Vibration Toolkit and NI Sound and Vibration Measurement Suite Drop Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
Legal Information
Overview
The NI Sound and Vibration Measurement Suite and the NI Sound and Vibration Toolkit provide comprehensive measurement, analysis, and vizualization tools for all audio, noise and vibration, and machine condition monitoring applications. Based on an open-analysis capability and a flexible measurement library, the NI Sound and Vibration Measurement Suite and NI Sound and Vibration Toolkit present a unique software-based measurement approach to creating customized applications. Learn more about the sound and vibration software at ni.com/soundandvibration.
Back to Top
System Requirements
The Sound and Vibration Toolkit/Sound and Vibration Measurement Suite has the following requirements:
Refer to the LabVIEW Readme for additional system requirements and supported operating systems for LabVIEW 2016.
Back to Top
NI Application Software Support
The following table lists the NI application software versions, including service packs, supported by the Sound and Vibration Measurement Suite. If you are not using NI application software, refer to Microsoft Visual Studio Support.
| NI Application Software | Versions Supported by NI Sound and Vibration Measurement Suite 2016 |
| NI LabVIEW (32- and 64-bit) Full or Professional Development System | 2016 |
| NI LabVIEW Real-Time Module | 2016 |
Note: Sound and Vibration Express VIs and the Sound and Vibration Assistant are not installed by NI Sound and Vibration Measurement Suite 2016. Side-by-side installation is supported; therefore you may install the Sound and Vibration Assistant from NI Sound and Vibration Toolkit or NI Sound and Vibration Measurement Suite 2015 or earlier.
Back to Top
Installation Instructions
You must be logged in with administrator privileges to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite.
Note You cannot install the Sound and Vibration Toolkit 2016 on a computer that has the Order Analysis Toolkit 2.1 or earlier installed. You must purchase and install the Sound and Vibration Measurement Suite 2016 to use order analysis functionality with the Sound and Vibration Toolkit 2016.
Installing from the LabVIEW 2016 Platform DVD
You can install all of your LabVIEW products—including the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite—using the LabVIEW 2016 Platform media. Refer to the LabVIEW Installation Guide on the LabVIEW Platform media for installation instructions and system requirements.
To request additional LabVIEW Platform media, refer to the National Instruments website.
Note If you purchased this product with an NI Software Suite or NI Product Bundle, use the installation media that shipped with your purchase to install this product.
Installing from the Sound and Vibration Measurement Suite DVD
Complete the following steps to install the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite:
Disable any automatic virus detection programs before installation. Some virus detection programs interfere with the installation program.
Insert the Sound and Vibration Measurement Suite DVD and follow the instructions that appear on the screen.
After installation, enable any virus detection programs you disabled and run a virus scan.
Restart the computer.
Activate the Sound and Vibration Toolkit or the Sound and Vibration Measurement Suite using the NI License Manager.
Back to Top
Product Security and Critical Updates
Visit ni.com/security to view and subscribe to receive security notifications about National Instruments products. Visit ni.com/critical-updates for information about critical updates from National Instruments.
Back to Top
New Features: Sound and Vibration Measurement Suite
The Sound and Vibration Measurement Suite includes the following new features:
Support for LabVIEW 2016
Support for LabVIEW 2016 does not remove previously installed support for LabVIEW 2015 and earlier.
Octave Compliance with IEC 61260-1:2014 and ANSI S1.11-2014
The updated API uses bandpass filters designed at base 10 center and bandedge frequencies as prescribed by the standards.
Time-Domain Fractional-Octave Filter
Use this VI to apply a standard fractional-octave filter to continuous time-domain signals.
Integration Filter Improvement
Use this VI to apply an arbitrary sample rate, time-domain integration filter to an input waveform. The filter redesign maintains the frequency-dependent magnitude response and improves the phase response so that the phase converges to the theoretical value at lower frequencies.
Updated Audio Test Examples
These udpated examples use the Stimulus-Response Test VIs to configure and generate test signals for stimulus-response measurements and use the Buffer VIs to access and parse data in parallel code. These examples serve as starting points for stimulus-response test applications with modular code segments for:
Test signal generation
Analog output
Analog input
Processing
Channel wires have been used to remove artificial complexity previously required to synchronize modular components and share data.
Updated Sample Projects
The following sound and vibration sample projects were updated. Instantiate a new project from the LabVIEW New Project dialog. The source is available in the LabVIEW Sample Projects and Templates folder.
Dynamic Signal Analyzer (DSA Soft Front Panel source) now supports finite logging, improved performance, and more UI customization options.
Dynamic Signal Generator (DSG Soft Front Panel source) now supports interactive dynamic signal configuration and a refreshed UI.
Back to Top
Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the Sound and Vibration Toolkit and the Sound and Vibration Measurement Suite.
Back to Top
Bug Fixes
You can access a list of bug fixes online. Refer to the National Instruments Web site for a list of bug fixes in the Sound and Vibration Toolkit and Sound and Vibration Measurement Suite.
Back to Top
Redistributing Executable Sound and Vibration Applications
If you want to redistribute executables built with the Sound and Vibration Measurement Suite or any of its components, you must purchase the appropriate NI Sound and Vibration Software Run-Time License. The part number for the NI Sound and Vibration Software Run-Time License is 779875-35. Contact National Instruments to purchase the NI Sound and Vibration Software Run-Time License.
Back to Top
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»LabVIEW Help in LabVIEW, for information about the Sound and Vibration VIs. Sound and Vibration Measurement Suite documentation is located in the LabVIEW Help in the following location: LabVIEW Help»Toolkits»Sound and Vibration Measurement Suite.
Back to Top
Accessing the Sample Projects
To access the sample projects and templates from the New Project dialog, select Sample Projects in the left pane and navigate to the project that best matches your application requirements.
Back to Top
Finding Examples
You can find LabVIEW examples for the Sound and Vibration VIs using the NI Example Finder. Select Help»Find Examples to launch the NI Example Finder. On the Browse page, the Sound and Vibration example VIs are located in the Toolkits and Modules»Sound and Vibration folder.
You also can find LabVIEW examples for the Sound and Vibration VIs in the labviewexamplesSound and Vibration and the labviewexamplesOrder Analysis directories.
Back to Top
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Back to Top
Using NI Software with Microsoft Windows 10
Microsoft Windows 10 is the latest version of the Windows operating system and features significant changes compared to previous versions. Windows 10 introduces several new capabilities and also combines features from both Windows 7 and Windows 8. For more information about NI support for Windows 10, visit ni.com/windows10.
Back to Top
Using NI Software with Microsoft Windows 8.1
When you install NI software on Microsoft Windows 8.1, you will notice a few additional tiles in the Apps view, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (NI MAX), and NI Launcher. For more information about NI support for Windows 8.1, visit ni.com/windows8.
Back to Top
NI Sound and Vibration Toolkit and NI Sound and Vibration Measurement Suite Drop Support for Microsoft Windows 7 RTM, Windows Vista, Windows XP, and Windows Server 2003
With this release, NI Sound and Vibration Toolkit 2016 and the NI Sound and Vibration Measurement Suite 2016 drop support for Microsoft Windows 7 RTM (with no service pack), Windows Vista, Windows XP, and Windows Server 2003. NI Sound and Vibration Toolkit 2016 and the NI Sound and Vibration Measurement Suite 2016 and later will not install or run on Windows 7 RTM (with no service pack), Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| LabVIEW | lifecycle |
| LabWindows™/CVI™ | cvi_lifecycle |
| Measurement Studio | mstudiolifecycle |
| TestStand | tslcp |
| DIAdem | ddlcp |
| SignalExpress | selcp |
| VeriStand | nivslifecycle |
Back to Top
Legal Information
Copyright
© 2007–2016 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
U.S. Government Restricted Rights
If you are an agency, department, or other entity of the United States Government ("Government"), the use, duplication, reproduction, release, modification, disclosure or transfer of the technical data included in this manual is governed by the Restricted Rights provisions under Federal Acquisition Regulation 52.227-14 for civilian agencies and Defense Federal Acquisition Regulation Supplement Section 252.227-7014 for military agencies.
IVI Foundation Copyright Notice
Content from the IVI specifications reproduced with permission from the IVI Foundation.
The IVI Foundation and its member companies make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The IVI Foundation and its member companies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
375332B-01
