Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
NI-Motion 14.0 Full Win32Eng NI运动控制设备驱动软件2014完整版 适用LabVIEW2011~LabVIEW2014
NI-Motion为NI运动控制设备的驱动软件Motion Control Driver Software，开发软件为NI SoftMotion，及Motion Assistant。
NI-Motion 14.0
发布日期
14-9-5
受支持的操作系统
Windows 7
Windows Server 2008 R2 64-bit
Windows Server 2003 R2 32-bit
Windows XP (SP3) 32-bit
Windows Vista
Windows 8
语言
英文
校验和
(MD5)
cd29101707a692c33d335bfb5c52ab15
百度网盘下载（限速，请开会员或使用破解限速工具）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能无效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
NI-Motion 14.0 Full Win32Eng NI运动控制设备驱动软件2014完整版 适用LabVIEW2011~LabVIEW2014
http://pcmv.cn/thread-24165-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
NI-Motion™ 14.0 Readme
This document contains installation and programming considerations for using NI-Motion with NI 73xx motion controllers, a list of changes in this version of NI-Motion, and information about NI-Motion known issues.
Contents
General Information
Installation and Configuration Instructions
NI-Motion 14.0 Changes and Enhancements
NI-Motion 14.0 General Considerations
NI-Motion 14.0 Known Issues
Previous NI-Motion Changes and Enhancements
Automating the Installation of NI Products
How to Use NI Software with Microsoft Windows 8
NI Software Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003
General Information
NI-Motion 14.0 is the motion control software you use to communicate with all National Instruments NI 73xx motion controllers using LabVIEW, C, LabWindows™/CVI™, or Microsoft Visual Basic 6.0 development platforms. Refer to KnowledgeBase article 39DA8HMU, Does the NI-Motion Driver Support Visual Studio .NET?, at ni.com/kb for information about Visual Studio .NET 2003 and Visual Studio 2005 or later support.
NI-Motion 14.0 is compatible with the following National Instruments software:
LabVIEW 2011 or later.
LabVIEW 2011 or later Real-Time Module.
LabWindows/CVI 7.0 or later.
NI Motion Assistant 2.6 or later graphical prototyping software.
Compatibility with Earlier Versions of NI-Motion
If you have developed motion control systems using a previous version of NI-Motion, you must recompile your code before it will work correctly with NI-Motion 14.0.
In addition, any applications you build in NI-Motion 14.0 will not work correctly in earlier versions of NI-Motion. Similarly, configuration settings you build and save in Measurement & Automation Explorer (MAX) with NI-Motion 14.0 will not work with applications you build in earlier versions of NI-Motion.
LabVIEW Real-Time Users
To use NI-Motion 14.0 with a real-time target, you must update the NI-Motion driver software on the real-time target system using MAX. Driver versions on the host and target system must be the same for proper operation. Refer to the Measurement & Automation Explorer Remote Systems Help by selecting Help»Help Topics»Remote Systems in MAX for information about installing software on the remote system.
Back to Top
Installation and Configuration Instructions
The following sections include important information about installing NI-Motion 14.0, instructions for downloading and installing NI-Motion 14.0 from the Web or from the CD, and information about NI-Motion firmware.
You can run the NI-Motion 14.0 installer on the following operating systems:
Windows 8.1/8/7/Vista
Windows XP Service Pack 3 or later (32-bit)
Windows Server 2003 R2 (32-bit)
Windows Server 2008 R2 (64-bit)
NI-Motion runs as a 32-bit application on all operating systems.
Notes:
NI-Motion is compatible with 32-bit LabVIEW only. Therefore, you must have 32-bit LabVIEW installed even if you use a 64-bit OS.
Support for Windows Server 2003 R2 may require disabling physical address extensions (PAE). To learn how this might affect your use of Windows Server 2003 and what actions you might have to take, visit ni.com/info and enter the info code PAESupport.
NI-Motion does not support Windows 2000/NT/Me/98/95, Windows XP x64, or the Windows Server non-R2 editions. If you are any of these operating systems, do not install NI-Motion 14.0.
Tip For optimal performance, update your operating system to the latest service pack and apply all security patches.
Downloading NI-Motion 14.0 from the Web
Complete the following steps to install this update:
Download the NIMotion140.exe file, and then run it.
Follow the onscreen instructions.
Note (Windows 8.1/8/7/Vista) Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
Download the updated firmware to your controller(s):
Note You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 14.0.
Launch MAX.
Expand Devices and Interfaces.
Select the appropriate motion controller.
Click the Firmware tab.
Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Installing from the CD
Complete the following steps to install this update:
Insert the NI-Motion 14.0 installation CD in the CD-ROM drive.
If you have autorun enabled, autorun.exe runs automatically. Otherwise, double-click autorun.exe.
Follow the onscreen instructions.
Note (Windows 8.1/8/7/Vista) Users may see access and security messages during installation. Accept the prompts to complete the installation.
When the installer completes, a dialog box appears that asks if you want to restart, shut down, or restart later. Select Restart.
Download the updated firmware to your controller(s):
Note You must update the firmware on your NI 73xx controllers before you can use them with NI-Motion 14.0.
Launch MAX.
Expand Devices and Interfaces.
Select the appropriate motion controller.
Click the Firmware tab.
Click the Update Firmware button at the top of the window to update all the firmware files on your device.
Changing Firmware Files to an Earlier Version of NI-Motion
For optimal performance, ensure that the firmware on your controller matches the driver version you install. Complete the following steps to replace the firmware on your controller if you need to use an earlier version of the NI-Motion software and firmware:
Launch MAX.
Expand Devices and Interfaces.
Select the appropriate motion controller.
Click the Firmware tab.
Right-click one of the firmware files in the Firmware Name column and select Download All Files to download the firmware files on the computer onto the controller.
Back to Top
NI-Motion 14.0 Changes and EnhancementsLabVIEW 2014 Support
NI-Motion 14.0 is fully supported on LabVIEW 2014.
Back to Top
NI-Motion 14.0 General ConsiderationsImporting Portable Configuration Files
Importing motion controller settings from older portable configuration files may take a few minutes due to the settings upgrade process. This is expected behavior.
Creating C Projects with Microsoft Visual Studio .NET 2003 and Visual Studio 2005 or later
Visual Studio .NET 2003 and Visual Studio 2005 and later do not allow C++ precompiled header files to be used with C source files. Disable precompiled headers when running NI-Motion C examples.
Firmware Versions in NI-Motion 14.0
The following table lists the expected firmware files that ship with NI-Motion 14.0.
Firmware
Sector | Version Number |
| NI 7330 | NI 7340 | NI 7350 | NI PCI-7390 |
| 68331 | 7.40.3003 | 7.40.3003 | 7.40.3003 | 7.40.3003 |
| DSP | 7.32.3003 | 7.32.3003 | 7.32.3003 | 7.32.3003 |
| FPGA1 | 7.00.3001 | 7.00.3001 | 7.10.3001 | 7.00.3014 |
| FPGA2 | 7.00.3001 | 7.00.3001 | — | — |
Back to Top
NI-Motion 14.0 Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in NI-Motion 14.0.
Issues That May Affect NI-Motion
An issue that may arise when running 32-bit applications in 64-bit versions of Windows could adversely affect NI-Motion. Refer to KnowledgeBase article 6EMFLQUB, Why Does National Instruments Software List Microsoft Hotfix 2588507 as a System Requirement?, at ni.com/kb for more information.
Back to Top
Previous NI-Motion Changes and Enhancements
Refer to KnowledgeBase article 47CC30FL, NI-Motion Readmes, at ni.com/kb for access to previous NI-Motion readme files, starting with NI-Motion 7.0.
Back to Top
Automating the Installation of NI Products
You can automate the installation of most NI products using command-line arguments to suppress some or all of the installer user interface and dialog boxes. However, starting with the August 2012 releases (products using NI Installers version 3.1 or later), you may need to perform additional steps before or during a silent installation of NI software.
If the NI product you are installing uses Microsoft .NET 4.0, the .NET installer may run before any NI software installs and may require a reboot before the installation of NI software begins. To avoid a .NET reboot, install .NET 4.0 separately before you install NI software.
For more information, refer to the following KnowledgeBase articles:
For more information on silent installations of individual NI products, refer to KB 4CJDP38M, Automating the Installation of a Single Installer.
For more information on silent installations of suited NI products, such as NI Developer Suite, refer to KB 4GGGDQH0, Automating the Installation of a Suited Installer.
To determine what version of NI Installers your product contains, refer to KB 4CJDR18M, How Can I Determine the Type and Version of My National Instruments Installer?.
Back to Top
How to Use NI Software with Microsoft Windows 8
When you install National Instruments software on Microsoft Windows 8, you will notice a few additional tiles on the Start screen, including shortcuts to NI application software products such as NI LabVIEW, Measurement & Automation Explorer (MAX), and the new NI Launcher.
Using NI Launcher
NI Launcher helps you find and launch installed NI products. It provides you with a method of finding NI products similar to the Start menu in previous versions of Microsoft Windows. To use NI Launcher, click the NI Launcher tile on the Start screen. NI Launcher launches the desktop and opens a menu containing a list of NI products. Click any NI product to launch it.
| Note Unlike previous versions of Microsoft Windows, MAX does not appear as a desktop shortcut. You can launch MAX either from the Start screen or from within NI Launcher. |
Pinning Frequently Used Applications
For convenience, you can pin your most-used NI applications, such as MAX, to either the Start screen or the Taskbar on the desktop, as necessary:
| Current Application | Icon Location | Pin to Action |
| Windows 8 Desktop | Desktop Taskbar | Right-click application and select Pin to Taskbar |
| Windows 8 Desktop | Start screen | Right-click application and select Pin to Start |
| Windows 8 Start screen | Desktop Taskbar | Right-click application and select Pin to taskbar from the menu bar on the bottom of the screen |
Finding All Programs
If you want to find a particular application or related files, such as documentation files, from the Start screen, you can access all installed files by right-clicking anywhere on the Start screen and selecting All apps. A list of all installed software and related files appears, in alphabetical order by creator or type.
For more information about NI support for Windows 8, visit ni.com/windows8.
Back to Top
NI-Motion Drops Support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 in 2016
NI-Motion will drop support for Microsoft Windows Vista, Windows XP, and Windows Server 2003 as of July 1, 2016. Versions of NI-Motion that ship after July 1, 2016 will not install or run on Windows Vista, Windows XP, or Windows Server 2003. For detailed information about NI application software product life cycles, visit ni.com/info and enter one of the following Info Codes:
| Product | Info Code |
| NI LabVIEW | lifecycle |
| NI LabWindows/CVI | cvi_lifecycle |
| NI Measurement Studio | mstudiolifecycle |
| NI TestStand | tslcp |
| NI DIAdem | ddlcp |
| NI SignalExpress | selcp |
| NI VeriStand | nivslifecycle |
Back to Top
Important Information
Copyright
© 2003–2014 National Instruments. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
End-User License Agreements and Third-Party Legal Notices
You can find end-user license agreements (EULAs) and third-party legal notices in the following locations after installation:
Notices are located in the <National Instruments>_Legal Information and <National Instruments> directories.
EULAs are located in the <National Instruments>SharedMDFLegallicense directory.
Review <National Instruments>_Legal Information.txt for information on including legal information in installers built with NI products.
Trademarks
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for information on National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies.
Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments and have no agency, partnership, or joint-venture relationship with National Instruments. <Include this notice only if you mention an alliance member, or the alliance membership program, in the readme.>
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
