Windows系统下（Linux和MAC系统下请自行了解清楚）NI的各种软件、模块、工具包、驱动程序，使用NI许可证管理器来激活的，绝大部分的都可以使用NI Lincense Activator来激活，以下链接可下载：
NI序列号Serial Number生成激活工具NI License Activator，LabVIEW/VBAI/VDM/VAS等软件模块工具包破解工具不限版本
http://pcmv.cn/thread-490-1-1.html
视觉论坛的各种资源，除了视觉相关的模块有使用外，大部分的都不会使用，所以仅提供资源不能提供技术支持。资源的下载地址一般会同时提供NI官方地址和百度网盘的下载地址。某些工具包NI的地址失效或没有NI的下载地址，那视觉论坛也没有办法，只能尝试使用百度网盘地址下载；如果百度网盘的下载地址失效过期，可联系论坛客服更新。现在NI的下载服务器对我国IP地址不是很友好，有些时候速度很慢或大的资源下载很容易出错，这样会造成安装过程各种类型报错而无法安装。建议在下载完成后，对下载资源做校验和验证（NI一般会提供MD5或SHA256等），与官方或视觉论坛提供的校验和对比，一致就可以安装，如果不一致，则需要重新下载。视觉论坛早期下载的资源，那时候NI没有这么多限制，基本上都是正常下载的资源；后期下载的资源，都与NI的正确校验和对比过，保证是正确的资源才上传到百度网盘，所以百度网盘的资源基本上是正确的。校验和工具下载地址：
文件Hash计算器FHash,文件校验和验证下载文件正确性验证，MD5值计算、SHA1值计算、SHA256值计算、CRC32值计算
http://pcmv.cn/thread-26524-1-1.html
LabVIEW 2009 NI SoftMotion Module Win32 NI运动控制模块2009 适用LV2009
LabVIEW 2009 SoftMotion模块
LabVIEW SoftMotion模块可帮助您将运动控制与I/O和视觉应用程序进行集成。
LabVIEW SoftMotion模块是LabVIEW编程环境的一个附加软件。您可在LabVIEW项目中配置、测试和调整LabVIEW SoftMotion轴。您可以将这些轴绑定到各种NI和第三方硬件配置。该模块具有用于自定义运动应用设计的高级功能，包括轨迹生成和多轴功能，如齿轮和坐标空间。
百度网盘下载地址（百度限速，请耐心等待。或使用破解工具或开超级会员提速）：
链接: 请注册视觉论坛用户，登陆后购买附件下载查看 提取码: 请注册登陆视觉论坛会员，购买附件查看
NI官方下载地址（可能失效或无法下载完成）：
请注册登陆视觉论坛会员，购买附件查看
LabVIEW 2009 NI SoftMotion Module Win32 NI运动控制模块2009 适用LV2009
http://pcmv.cn/thread-24096-1-1.html?fromuid=9
(出处: 视觉论坛VISIONBBS|视觉之家VISIONHOME)
LabVIEW 2009 NI SoftMotion™ Module Readme
June 2009
This document contains information to introduce you to the LabVIEW NI SoftMotion Module including installation information, a list of changes in this version of NI SoftMotion, and information about known issues for this version of NI SoftMotion.
Contents
Overview
System Requirements
Installation Instructions
New Features
General Information
Accessing the Help
Finding Examples
Known Issues
Overview
The LabVIEW NI SoftMotion Module allows you to use the LabVIEW project to configure and test your motion axis settings and tune your servo motors, program motion profiles with a function block API, create custom motion applications, and simulate your designs created in SolidWorks.
For more information about function block programming and using function blocks with the NI SoftMotion Module refer to Motion Profile Development using the Function Block API at zone.ni.com.
Note: Refer to the NI SoftMotion Selection Guide at zone.ni.com for a description of the different NI SoftMotion packages available.
System Requirements
The LabVIEW 2009 NI SoftMotion Module supports Microsoft Windows Vista/XP/2000. The NI SoftMotion Module is compatible with the following National Instruments software.
Installation Instructions
You can install all of your LabVIEW products—including the LabVIEW 2009 NI SoftMotion Module—using the LabVIEW 2009 Platform DVDs. You can find installation instructions for the LabVIEW 2009 NI SoftMotion Module along with activation instructions in the following locations:
LabVIEW Release Notes, which are available in your LabVIEW software kit.
LabVIEW 2009 Platform DVDs Readme, which is available on the top-level of LabVIEW Platform DVD 1.
To request additional LabVIEW 2009 Platform DVDs, refer to the National Instruments Web site at ni.com.
New Features
The following items are enhancements or additions to the LabVIEW NI SoftMotion Module relative to the NI SoftMotion Development Module for LabVIEW.
LabVIEW Palette Reorganization
The VIs previously on the NI SoftMotion palette are now included on the NI SoftMotion»Advanced»Trajectory palette.
NI Example Finder Reorganization
The examples previously provided with the NI SoftMotion Development Module for LabVIEW are now included in Toolkits and Modules»Motion Control»NI SoftMotion»Customizing NI SoftMotion»Advanced»Trajectory and Toolkits and Modules»Motion Control»NI SoftMotion»Customizing NI SoftMotion»Without NI Scan Engine.
Using NI SoftMotion Development Module VIs with NI SoftMotion
You can use your NI SoftMotion Development Module VIs with the new LabVIEW NI SoftMotion Module using one of the following options:
If you do not use the NI Scan Engine, you can continue to use your NI SoftMotion Development Module VIs after recompiling. When you install NI-RIO and the LabVIEW NI SoftMotion Module on the RT target, do not include NI Scan Engine support.
Note: If you have developed applications using the NI SoftMotion Development Module 2.0 you may need to run the NI SoftMotion Dev Module Upgrade Utility from the Tools menu in LabVIEW to update your code. Refer to the NI SoftMotion Dev Module Upgrade Utility Readme for more information.
If you want to use the NI Scan Engine with your NI SoftMotion Development Module VIs, you need to install the NI Scan Engine on the RT target and update your VIs. Refer to How do I upgrade my NI SoftMotion Development Module 2.x VIs to use with the LabVIEW NI SoftMotion Module? at ni.comkb for instructions.
Arc Input Behavior Changes
The rotation direction of the arc roll, pitch, and yaw inputs has changed in NI SoftMotion relative to the NI SoftMotion Development Module so that a positive angle rotates counterclockwise when looking toward the origin.
Fixed Issue ID 111553: Incorrect Number of Points Returned
The NI SoftMotion Development Module trajectory generator was incorrectly dropping the last few points when returning spline points for moves. This calculation issue is resolved in NI SoftMotion.
General InformationLabVIEW Real-Time Users
To use the updates and features included in the LabVIEW 2009 NI SoftMotion Module, you must install the LabVIEW 2009 NI SoftMotion Module software on the LabVIEW Real-Time target system using Measurement & Automation Explorer (MAX).
Using Torque Mode
When you use an NI SoftMotion axis in torque loop mode, you must set the NI Scan Engine scan period to 2 ms or faster or the axis will not function.
Accessing the Help
Refer to the LabVIEW Help, accessible by selecting Help»Search the LabVIEW Help from the pull-down menu in LabVIEW, for information about NI SoftMotion Module concepts, using NI SoftMotion function blocks, step-by-step instructions using the LabVIEW NI SoftMotion Module, and reference information about NI SoftMotion VIs and function blocks.
Finding Examples
LabVIEW examples for the NI SoftMotion Module are located in the labviewexamplesmotionSoftMotion folder. You can modify an example VI to fit an application, or you can copy and paste from one or more examples into a VI that you create.
LabVIEW 2009 NI SoftMotion Module Known Issues
You can access the software and documentation known issues list online. Refer to the National Instruments Web site for an up-to-date list of known issues in the LabVIEW 2009 NI SoftMotion Module.
Important Information
Copyright
© 2009 National Instruments Corporation. All rights reserved.
Under the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical, including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part, without the prior written consent of National Instruments Corporation.
National Instruments respects the intellectual property of others, and we ask our users to do the same. NI software is protected by copyright and other intellectual property laws. Where NI software may be used to reproduce software or other materials belonging to others, you may use NI software only to reproduce materials that you may reproduce in accordance with the terms of any applicable license or other legal restriction.
Trademarks
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks.
Patents
For patents covering the National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents.
